Analog-Reflector@DVSwitch.groups.io

DVSwitch test server changes

To better reflect the functionality of our 2 test servers, I have swapped their hostnames and IP addresses. https://server.dvswitch.org 104.168.46.105 AllStarLink node 2152 This is the full function s

To better reflect the functionality of our 2 test servers, I have swapped their hostnames and IP addresses. https://server.dvswitch.org 104.168.46.105 AllStarLink node 2152 This is the full function system capable of using all (almost) modes DMR, YSF, NXDN, P25, AllStar, STFU, M17 and Intercom. https://allstar.dvswitch.org 104.168.52.128 AllStarLink node 2150 This is the AllStar only demo system. Note, both systems are using port 443 So, just use https://

By Steve N4IRS ·

Updates to Analog_Reflector 5

3-7-2021: Updated Github and DVSwitch apt repository Analog_Reflector to version 1.1.16 * Fix autoMute false case * Kick now just kicks specific client by UUID * Fix crash on DVSM for Intercom and ASL

3-7-2021: Updated Github and DVSwitch apt repository Analog_Reflector to version 1.1.16 * Fix autoMute false case * Kick now just kicks specific client by UUID * Fix crash on DVSM for Intercom and ASL modes * Add non-AB keep alive to the reflector

By Steve N4IRS ·

Audio codecs on AR 3

Hi all I installed AR to run alongside AB and AR is now the link to the outside world. If I change setting (on DVSM) from "server selected" to either ulaw or adpcm, the TRX audio goes silent (it will

By Robert 2E0ZWH ·

Help with connecting to ASL via USRP 8

Hi, I was hoping someone could point me in the right direction please. I would like to create a link using Analog Reflector so that I can access ASL(hamvoip) via USRP. I like the higher quality codec

By Robert 2E0ZWH ·

DVSwitch Server & Allstar 2

Does ANYONE know how to link DVSwitch Server AND Hamvoip (Allstar)? I have an MMDVM hotspot on TGIF, a UHF repeater running Hamvoip and a DVSwitch Server. I want them all linked together. Anyone know

By W2LPC ·

analog_bridge

Hello all. I am running Allstar Hamvoip on a repeater. I just built a Raspberry Pi3b+ with DVSwitch Server. All files needed for the DMR bridge are present and correct. I can key up my HT on my hotspo

By W2LPC ·

STFU Analog_Reflector.json 2

I was helping a friend set up STFU. We have it working if you select STFU from the DVSwitch App, but not using Analog Reflector. Is there any special config within Analog Reflector to make it work? Re

By Chris Andrist, KC7WSU ·

ASL mode missing from Dvswitch mobile 2

When I long press on the "A" key I no longer have the mecu option of Allstar/ASL within the DVSwitch Android app. It is working fine through the hUC. I could have swore it was there at one point. I ha

By Steve Lenti ·

M17 Implemented? 2

Just curious if this mode is available yet. I see testing back in April but is it available to us yet? If so, how to install? Thanks John

By John K1IF ·

ODMRT (STFU) 3

I performed an update/upgrade last night and I can now connect to STFU. I read it lets us connect to BM in a new way using the ODMRT protocol but will this let a friend use AR on BM without using peer

By John K1IF ·

Muting Randomly 3

Before I dig into this, I wanted to make sure I am not just missing a basic configuration. My html.huc keeps changing the mute selection for my allstar private node. My private node connects my DMR ta

By David KG5RDF ·

AR user audio being muted when on AllStar Being passed when on Digital 2

a friend was trying to talk on allstar but the audio is being muted as the log reports it as being transmission double, ignoring stream. I hear him fine while on ar but his audio not being passed thro

By John K1IF ·

6-digit dmr id

Hi everyone I have a small problem with the group we are associating a repeater reconfigured in analog with 6-digit DMR id to an Analog_reflector but unfortunately when you enter from echolink the pas

By Mauro iu0ndt ·

Repeater/subscriber id error 2

I just happen to be peeking around the P25 server today, executed a "tail -f Analog_Bridge.log" and noticed this error; F: 2021-05-29 19:56:52.619 Repeater ID (0) can not be the same as subscriber ID

By Kevin Halton ·

Error on fresh install - TypeError: first[_0x6ee2[295]] is not a function 19

So this is a fresh AR install on a updated dvs server my ports for AR match AB my ports for ASL USRP correct I adjusted my ports from default for mmdvm where as the start with a 3 not a 5 in my files.

By Mike KB8JNM ·

Controlling port muting via scripts. 5

I know that Analog_Reflector has the ability to mute the various bridges that are connected to it, and that the muting can be controlled on a per bridge bases by using hUC. However, I'm wondering if i

By Tony Langdon ·

EMAIL FROM N3FE re: connecting to BM 4

I received an email today from N3FE Please stop connecting your DVswitch to statewide 3101-3157, 3100 and 91. You are connecting as a peer which should NOT be done. We also see you bridging other peop

By John K1IF ·

An issue here -Subject: A start job for unit timeserver.service has failed-- 2

Should i be fixing this error?? tanks May 24 06:28:29 pi-star-4 systemd[1]: timeserver.service: Failed with result 'exit-code'. -- Subject: Unit failed -- Defined-By: systemd -- Support: https://www.d

By @AndrewVK2HAC ·

SSL Certificate Expired 4

Haven't used my iOS device in a while. When I tried to access my RPi AR image, I got the big yellow message. When I checked my iOS device, it indicated that the SSL certificate had expired March 22nd.

By Tom Corcoran ·

Navigatge to other DMR Networks? 5

When using AR, is there a way to navigate to other networks like QRM and TGIF? I know I can write macros but I wondered if the DVS/Swiss Knife already had a solution? Tom VE3NY

By Tom Corcoran ·