- USRP and rpt.conf setting
Re: USRP and rpt.conf setting
toggle quoted messageShow quoted text
Think you are right.., The habit of doing a repeater build i hard to overcome ;-)
Thanks for the link!
Le mar. 9 févr. 2021 à 16:37, Steve N4IRS <szingman@...
> a écrit :
I think you have the AllStar Node setup in duplex. See <https://github.com/DVSwitch/Analog_Bridge/blob/master/ASL/rpt.conf.txt
On 2/9/21 4:12 PM, Pierre Martel wrote:
Hi, I am trying to make a bridge between a DMR tg and an
allstarlink node and an extension on Hamshack Hotline.
all those are on a VPS that I use also for anouncing my /24 in the
44 net and a vpn server. running latest debain and up to date
I installed allstarlink from the repo all went well. I programmed
my node as a radio less hub at first then connected it to
allstarlink. All was good. I then switched the driver for the node
to USRP and then installed DVswitch from the repo (made sure the
USRP driver were loaded and I rebooted between every action, asl
install, connection to asl, switch to USRP, install dvswitch.
Then I used the dvs menu to do the initial config, all went well,
and Now if I go on the dashboard I can see that I am connected to
BM ( in mmdvm mode but I will connect with a openbridge connection
later on, I am one of the admin for BM Canada).
Now If someone connect to the dmr side of thing all we hear is
Ellison saying node xxxxx timeout and a bout 1 seconde of the dmr
sound then Allison, then another secound of dmr ect. till the dm
side has no more data to send.. I am using the software vocoder.
But I do have multiple vocoder thumb that I could link to the
system if it would be usefull.
Anyone could help me fix that?
I did not do any linking to HH yet as I want to first have working
system before trying to break things in the dial plan ;-)
Join DVSwitch-AllStar@DVSwitch.groups.io to automatically receive all group messages.