All was working fine ASL<==>DMR no issues, after a Rpi4 reboot only ASL comes up fine but the other 3 programs do not, I can run them manually no problem but not using the systemctl anymore, the

The configuration info in that document can still be use. The better you actually understand what you are doing, the better you can adapt to updates. The process to build a AllStar <->

Steve, I do not see those directions in the document I have and used in numerous times in the past, maybe outdated at this point?

Kevin, You partially installed the repositories for AllStarLink, not dvswitch. For DVSwitch Server: wget http://dvswitch.org/buster chmod +x buster ./buster When

Running on a 25gb NVMe VM, 1 cpu, 1gb memory, and 2tb bandwidth in the cloud with Debian9 I ran apt-get update prior to install just tried again and I get this error, not 100% it was not there prior

What hardware are you running? What OS and version? Please show what did before apt install. Steve N4IRS

I am attempting to start up an ASL-DMR bridge to link to a private dmr talkgroup. I am stuck when I run apt-get install dvswitch -y, I get this error,; apt-get install dvswitch -y Reading package

Darn, how have I missed that?! Thanks Steve -- IK7VXC Mike

Yes it does. Read the link I posted.

Thanks Steve. Done that. The Monit page asks for user and password. -- IK7VXC Mike

<https://dvswitch.groups.io/g/HamVoiP/wiki/29110>

Hi I wish to install Dvswitch server on my raspberry where there is already a Hamvoip AllStar install. What are the right commands I should issue? Thank you -- IK7VXC Mike

you can just set allstar as a hub on the main site and others as a node linked to it. no problem

Hi guys This is more of a guidance question with the hope of a push in the right direction. Our club has 3 main sites I look after which are normally linked via either IP or RF but the time has come

Thank you, I am assuming apache2 is for allmon2 and not Allstar? I have zero plans on using it for DVSwitch server. I will move forward less apache2 on this new install. Its good to know, if I ever

It appears apache2 is running on that server. Lighttp will not start unless you are running it on a non-standard port. Your USRP has port 31001 for both RX and TX. Since this is running on the

Not that I know of. Sent by smoke signal (AT&T)

I reload another server and only install DVSwitch. Dashboard came right up. Is there a known issue with Allstar new beta and DVSwitch before I add ASL?

I have been trying to create another DVSwitch Server on a Virmach machine. Loaded the machine as I did with the prior implementation. Lighttpd is installed. Server has no ip address. The allstar node

Off the top of my head, your USRP ports don't line up between rpt.conf and ab.ini. Chip N3FUD