Date   

Re: DVSwitch Allstar DMR Bridge

David KG5RDF
 

Got it up and running!

Thanks David KG5RDF


Re: DVSwitch Allstar DMR Bridge

David KG5RDF
 

Pi is up Cloud sill not, new cloud log attached above


Re: DVSwitch Allstar DMR Bridge

David KG5RDF
 

Thanks Steve, saw that after I posted my message. Still not being able to connect to BM, I turned off hotspot security, turned back on, set password, and waited 5 minutes. No go still. I tried even added hotspot 05 to the MMDVM [General ID] tried id = 3101729 and id 310172905 on the cloud configuration. BM shows hotspot red. Attached logs. Going to move over to the pi and try getting that going. The cloud is for NWS here in DFW Texas.

David KG5RDF


Re: DVSwitch Allstar DMR Bridge

Steve N4IRS
 

On 3/13/21 11:44 PM, David KG5RDF wrote:
Been running several bridges for a few years. Then drop to one and moved it to cloud. The cloud stopped operating and I could not repair it. I reloaded the OS and started over. No luck either. I then decided to just setup a bridge on a pi for testing. That has not gone well either. I have attached log file that has mmdvm and analog data. I not connecting to brandmeister and need some direction. Bridge never showed on on hotspot listing on brandmeister.

Thanks David KG5RDF


DVSwitch Allstar DMR Bridge

David KG5RDF
 

Been running several bridges for a few years. Then drop to one and moved it to cloud. The cloud stopped operating and I could not repair it. I reloaded the OS and started over. No luck either. I then decided to just setup a bridge on a pi for testing. That has not gone well either. I have attached log file that has mmdvm and analog data. I not connecting to brandmeister and need some direction. Bridge never showed on on hotspot listing on brandmeister.

Thanks David KG5RDF


Re: DVSwitch Server plus AllStar image

Steve N4IRS
 

No,
That would be a bad assumption. As promised <https://dvswitch.groups.io/g/Analog-Reflector/message/35>

On 3/9/21 8:39 PM, JeffH wrote:
@Steve

You listed 3/1/2021 as the release for the web-based client...it's 3/9 today. Is it safe to assume the release date slipped and you haven't updated the release date yet?

--
Jeff Hochberg
W4JEW
Atlanta, GA


Re: DVSwitch Server plus AllStar image

JeffH - W4JEW
 

@Steve

You listed 3/1/2021 as the release for the web-based client...it's 3/9 today. Is it safe to assume the release date slipped and you haven't updated the release date yet?

--
Jeff Hochberg
W4JEW
Atlanta, GA


Re: Allmon on dvswitch

Steve N4IRS
 

You can follow the instructions included with allmon https://github.com/tsawyer/allmon2

On 3/6/21 6:12 AM, Mahefuze Moosa wrote:
Hi
How to I program allmon on dvswitch can I have instructions or scripts that need to be loaded.
Thanks


Allmon on dvswitch

Mahefuze Moosa
 

Hi
How to I program allmon on dvswitch can I have instructions or scripts that need to be loaded.
Thanks


Re: Haw can I make use of YSFGateway?

Steve N4IRS
 

If you are running MMDVM_Bridge you don't "need" YSFGateway to connect to YSFReflectors. You do need it to connect to FCS.

On 3/1/21 6:56 PM, Tito Lopez wrote:
Excuse my ignorance.  I will just kill the services to keep it from running. I have no use for it.
Thanks


Re: Haw can I make use of YSFGateway?

Tito Lopez - YN1OB
 

Excuse my ignorance.  I will just kill the services to keep it from running. I have no use for it.
Thanks


Re: Haw can I make use of YSFGateway?

Steve N4IRS
 

Please excuse the question, why would you? You can't share a gateway.

On 3/1/21 6:31 PM, Tito Lopez wrote:
Hello guys, I am looking for info on how to make use of the YSFGateway running on the server image. I currently have a reflector running on a different VPS. 
My Question is, Can I use the YSFGateway running on the image and have clients connect to it just like on the stand alone YSF Reflector?
How do I setup the client to connect  this "YSFGateway" and getting to publish such gateway 
Please advise. 
YN1OB


Haw can I make use of YSFGateway?

Tito Lopez - YN1OB
 

Hello guys, I am looking for info on how to make use of the YSFGateway running on the server image. I currently have a reflector running on a different VPS. 
My Question is, Can I use the YSFGateway running on the image and have clients connect to it just like on the stand alone YSF Reflector?
How do I setup the client to connect  this "YSFGateway" and getting to publish such gateway 
Please advise. 
YN1OB


Echolink connections time out on this version

Tito Lopez - YN1OB
 

Hello  Folks, I am running the new version you guys put out recently. Works wonderful with the exception of incoming Echolink connections.
Firewalls and Port Forwarding has been setup but dog on echolink will not accept connections.  
Here is the Asterisk CLI output 
[Mar  1 10:39:55] WARNING[11171]: chan_echolink.c:1434 send_heartbeat: countdown for YN1OB(x77.2x9.x4.2xx) negative

Any input?


Re: DVSwitch Server plus AllStar image

Tom Corcoran
 

Works great. Thank you for the speedy reply and resolution. 
--

Tnx ...Tom VE3NY


Re: Failure code : (29) Bad Password or Stanza

Steve N4IRS
 

As it says,
Copy the stanza [iaxclient] below and change the name from iaxclient to your callsign. Example [W1ABC]

Change the secret =  Your_Secret_Password_Here to your password. secret = blabla

For extensions.conf, In [globals]
NODE = is probally already set to your node number. If not, set it.

On 2/21/21 8:15 PM, Ken, K6EFJ wrote:
Yes I did, but I have a question, do I delete the existing  stanza [iaxclient]  then add the stanza in wiki 8719 or just add the new one with my call sign? Also should I add NODE 1999 to [globals] in extensions.conf


Re: Failure code : (29) Bad Password or Stanza

Ken, K6EFJ
 

Yes I did, but I have a question, do I delete the existing  stanza [iaxclient]  then add the stanza in wiki 8719 or just add the new one with my call sign? Also should I add NODE 1999 to [globals] in extensions.conf


Re: Failure code : (29) Bad Password or Stanza

Steve N4IRS
 

On 2/21/21 6:35 PM, Ken, K6EFJ wrote:
Steve, I get the error when using latest DvSwith Mobile app. When I was using a separate Pi 3b+ for Allstar and DvSwitch it worked perfect.
Ken K6EFJ


Re: Failure code : (29) Bad Password or Stanza

Ken, K6EFJ
 

Steve, I get the error when using latest DvSwith Mobile app. When I was using a separate Pi 3b+ for Allstar and DvSwitch it worked perfect.
Ken K6EFJ


Re: Failure code : (29) Bad Password or Stanza

Steve N4IRS
 

Are you getting this when trying to connect to AllStar from DVSwitch Mobile?

On 2/21/21 6:04 PM, Ken, K6EFJ wrote:
I have installed the new DvSwitch Server and Allstar image. The Dvswitch Server works perfect. My problem is I am having a issue with setting up Allstar. When entering the configuration menu (asl-menu) I have done the following: Set Root Password <no> Change dvswitch User Password <no> Existing hostname is dvswitch Existing Domain Name is Not Set Existing FQDN is dvswitch IP address is DHCP Have selected Dahdi/pseudo for repeater interface channel driver The Allstar node # 50414 and port # 4569 are both correct on Allstar and port #4569 is correct in iax.conf. I get a Failure code : (29) Bad Password or Stanza no matter what I change. What am I doing wrong. Thanks for your time and any help or thoughts,
Ken Smith K6EFJ

41 - 60 of 127