Date
1 - 8 of 8
Retaking on the ASL<->YSF personal project #analog_bridge #mmdvm_bridge
|
Tito Lopez - YN1OB
Dave, thanks for your input and I appreciate you taken the initiative to help further, other have done great too!
Just to give you a run down... I have setup a YSFReflector What I want to do is connect to that reflector via ASL<--->YSFReflector DMR is not my thing right now and would like that all the traffic I get from my ASL to that reflector. I am currently running a node in vultr. the thing runs fine. That is where my problem is. I have built ASL-DMR node prior to this but it seems that all stops working once I try to incorporate YSF thanks Orlando
|
|
|
|
David Martin
Hi Tito, Without knowing exactly what you want to do, I would say you do need, A, a 'usrp node' for analog_bridge and mmdvm_bridge to connect to. And, B, a simpleusb node for your all-star/echolink numbers that will connect to the loudspeaker/microphone. These are then connected together in asterisk on startup. If you are really starting from scratch and you need guidance then I suggest you follow the ASL to DMR how-to. Get that working then make changes as per Steve's email earlier to connect to YSF. I have built two of these and they work well. Let me know if I can help further. Dave Martin VK3KQT
On Tue, Mar 24, 2020, 07:19 Tito Lopez <OBUSTOS01@...> wrote: I guess I failed to mention that I will host a radioless node. so I do not need the "1999" as i want the "radioless" node to be the bridge.
|
|
|
|
Tito Lopez - YN1OB
I guess I failed to mention that I will host a radioless node. so I do not need the "1999" as i want the "radioless" node to be the bridge.
Back on the ALS<->YSF Bandwagon again.... just cant quit as it is a learning experience. YN1OB
|
|
|
|
Tito Lopez - YN1OB
Well I tried it but failed miserably.
Anyone willing to lend a hand wanting to login to the node adn check that crap out. I am sure its something simple but ysf never seems to work when trying to configured the darn thing. No audio coming across Any takers? please let me know. YN1OB
|
|
|
|
Yes
From: DVSwitch-ASL@DVSwitch.groups.io <DVSwitch-ASL@DVSwitch.groups.io> on behalf of Tito Lopez <OBUSTOS01@...>
Sent: Wednesday, March 11, 2020 3:58:46 PM To: DVSwitch-ASL@DVSwitch.groups.io <DVSwitch-ASL@DVSwitch.groups.io> Subject: Re: [DVSwitch-ASL] Retaking on the ASL<->YSF personal project #mmdvm_bridge #analog_bridge One last question, do I need that USRP in the "1999" Stanza?
Orlando w3daw
|
|
|
|
Tito Lopez - YN1OB
One last question, do I need that USRP in the "1999" Stanza?
Orlando w3daw
|
|
|
|
Pretty much disable DMR and enable YSF in MMDVM_Bridge.ini
toggle quoted messageShow quoted text
Set the ports for YSF in DVSwitch.ini to match the ports for DMR (TX and RX) Steve N4IRS
On 3/10/2020 7:52 PM, Tito Lopez wrote:
I have been away from the groups for a few months now and would like to restart the project in which I would like to bridge ASL to YSFN strictly.
|
|
|
|
Tito Lopez - YN1OB
I have been away from the groups for a few months now and would like to restart the project in which I would like to bridge ASL to YSFN strictly.
I have both fresh installs of Allstarlink and YSF reflector. Both running on vultr provider. Since I have the YSFReflector running on a separate machine I need to start with Allstarlink. Allstarlink is up and running with echolink enabled which is running fine. I see that there are write ups to to ASL-DMR but my fav is YSF. Let me know what I need to do to get that working. Thanks to all those who take time to point me out in the right direction. W3DAW
|
|
|