Analog Bridge Questions


Chip N3FUD
 

Off the top of my head, your USRP ports don't line up between rpt.conf and ab.ini.  

Chip N3FUD

On Mon, Aug 30, 2021, 15:38 Tito Lopez - YN1OB <OBUSTOS01@...> wrote:
MMDVM.ini

[General]
Callsign=YN1OB
Id=710100211
Timeout=180
Duplex=0
 
[Info]
RXFrequency=147710000
TXFrequency=147710000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Cloud Nica
Description=MMDVM_Bridge
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
 
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
 
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
 
[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0
 
[D-Star]
Enable=0
Module=B
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[P25]
Enable=0
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
[DMR Network]
Enable=1
Address=207.246.76.153
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=192.227.231.172
GatewayPort=42000
Debug=0
 
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


AB.ini

; Analog_Bridge configuration file.
;   This file should be placed in either /etc or it can be
;   supplied as a path on the Analog_Bridge command line.
 
; The best way to think of this file is that there are two main sections, the USRP (analog audio) and
; AMBE_AUDIO (compressed audio).  Analog_Bridge will take everything sent to the USRP port and
; encode it for transmission on the AMBE_AUDIO port.  The encoder will use the format defined in ambeMode.
; As you might expect, the reverse direction is defined too.
 
; Analog_Bridge supports include files. More on this later...
include = dvsm.macro
; include = asl.macro
 
; General Section describes settings for Analog_Bridge itself.
[GENERAL]
logLevel = 2                            ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
 
; Metadata management
exportMetadata = true                   ; Export metadata to USRP partner (transcode setups require this)
transferRootDir = /tmp ; Export database files to USRP partner
subscriberFile = /var/lib/dvswitch/subscriber_ids.csv   ; DMR ID to callsign lookup data
 
; General vocoder setup information
decoderFallBack = true                  ; Allow software AMBE decoding if a hardware decoder is not found
useEmulator = true                      ; Use the MD380 AMBE emulator for AMBE72 (DMR/YSFN/NXDN)
emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server
 
pcmPort = 2222                          ; UDP port to send to the WebProxy
 
; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                         ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)
 
; The metadata below is used when ASL is the source since it does not have any concept of digital modes
gatewayDmrId = 7101002                  ; ID to use when transmitting from Analog_Bridge 7 digit ID
repeaterID = 710100211                  ; ID of source repeater 7 digit ID plus 2 digit SSID
txTg = 710                                ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
colorCode = 1                           ; Color Code to assign DMR frames
 
; Information for USRP channel driver.  This interface uses PCM to transfer audio information
; There are two typical configurations, ASL and Transcode.  ASL (AllstarLink) is for analog clients connected
; to a digital network.  Transcode is when Analog_Bridge actually points its PCM interfaces back at itself, 
; causing a TLV <-- (pcm <--> pcm) --> TLV type of architecture.
;   When using ASL, this matches the rpt.conf ASL file with a setting like:
;   rxchannel = usrp/127.0.0.1:34001:32001
;   When Transcoding, make two ini files and set txPort equal to the other instance rxPort (crossover).  Launch
;   each instance with its own ini file.
[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Analog_Reflector, Allstar/Asterisk or another Analog_Bridge)
txPort = 54010                          ; Transmit USRP frames on this port
rxPort = 54010                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_USE_GAIN              ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC)
usrpGain = 4.00                         ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
usrpAGC = -20,10,100                    ; Set the agc threshold (db), slope (db) and decay (ms)
tlvAudio = AUDIO_USE_GAIN               ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.25                          ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
 
[MACROS]
 
; Where the macros are
; xxxx=yyyy
; xxxx is the dial string to match
; yyyy is the command line to execute
 
; xxxx must be preceded by a *
; xxxx can be any string (alphanumeric)
; yyyy is the command to execute
; yyyy will replace xxxx in the dial string
; arguments follow the macro name with a # delimiter
 
; For example using macro "5678" above would look like:
; *5678#9876
 
; Which would invoke:
; echo 9876
 
; Information for DV3000 hardware decoder
;   There are two configuration modes: IP (AMBEServer) and serial (direct connect hardware)
;   Use top server and port if using AMBEServer
;   Use bottom server/port and serial = true if using the DV3000u (thumbdv)
;   Did you run AMBETest4.py before using this?
[DV3000]
; address = 127.0.0.1                 ; IP address of AMBEServer
; rxPort = 2460                       ; Port of AMBEServer
; address = /dev/ttyUSB0              ; Device of DV3000U on this machine
; baud = 460800                       ; Baud rate of the dongle (230400 or 460800)
; serial = true                       ; Use serial=true for direct connect or serial=false for AMBEServer


Rpt.conf

; Radio Repeater configuration file (for use with app_rpt)
 
 
; Your Repeater
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
[1441]
rxchannel = USRP/127.0.0.1:34001:32001  ; Use the USRP channel driver. Must be enabled in modules.conf
                                        ; 127.0.0.1 = IP of the target application
                                        ; 34001 = UDP port the target application is listening on
                                        ; 32001 = UDP port ASL is listening on
 
duplex = 0                              ; 0 = Half duplex with no telemetry tones or hang time. Ah, but Allison STILL talks!
 
hangtime = 0                            ; squelch tail hang time 0
althangtime = 0                         ; longer squelch tail hang time 0
 
holdofftelem = 1                        ; Hold off all telemetry when signal is present on receiver or from connected nodes
                                        ; except when an ID needs to be done and there is a signal coming from a connected node.
 
telemdefault = 0                        ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me.
 
telemdynamic = 0                        ; 0 = disallow users to change the local telemetry setting with a COP command,
 
linktolink = no                         ; disables forcing physical half-duplex operation of main repeater while
                                        ; still keeping half-duplex semantics (optional)
 
nounkeyct = 1                           ; Set to a 1 to eliminate courtesy tones and associated delays.
 
totime = 180000                         ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)
 
idrecording = |ie                       ; id recording or morse string see http://ohnosec.org/drupal/node/87
idtalkover = |ie                        ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129
 
 
[294130] ; Change this to your assigned node number 
 
                                        ; Must also be enabled in modules.conf
; Rx audio/signalling channel. Choose ONLY 1 per node stanza
 
; Enable the selected channel driver in modules.conf !!!
rxchannel = dahdi/pseudo         ; No radio (hub)
; rxchannel = SimpleUSB/usb_294130 ; SimpleUSB 
; rxchannel = Pi/1                      ; Raspberry Pi PiTA 
; rxchannel = Radio/usb_294130 ; USBRadio (DSP) 
; rxchannel = Dahdi/1 ; PCI Quad card 
; rxchannel = Beagle/1 ; BeagleBoard 
; rxchannel = USRP/127.0.0.1:34001:32001; Use the USRP channel driver. Must be enabled in modules.conf
; 127.0.0.1 = IP of the target application
; 34001 = UDP port the target application is listening on
; 32001 = UDP port Asterisk is listening on
 
duplex = 1                              ; 0 = Half duplex with no telemetry tones or hang time.
                                        ;     Special Case: Full duplex if linktolink is set to yes.
                                        ;     This mode is preferred when interfacing with an external multiport repeater controller.
;     Comment out idrecording and idtalkover to suppress IDs also
                                        ; 1 = Half duplex with telemetry tones and hang time. Does not repeat audio.
                                        ;     This mode is preferred when interfacing a simplex node.
                                        ; 2 = Full Duplex with telemetry tones and hang time.
                                        ;     This mode is preferred when interfacing a repeater.
                                        ; 3 = Full Duplex with telemetry tones and hang time, but no repeated audio.
                                        ; 4 = Full Duplex with telemetry tones and hang time. Repeated audio only when the autopatch is down.
 
linktolink = no ; disables forcing physical half-duplex operation of main repeater while
; still keeping half-duplex semantics (optional)
 
linkmongain = 0 ; Link Monitor Gain adjusts the audio level of monitored nodes when a signal from another node or the local receiver is received.
; If linkmongain is set to a negative number the monitored audio will decrease by the set amount in db.
; If linkmongain set to a positive number monitored audio will increase by the set amount in db.
; The value of linkmongain is in db. The default value is 0 db.
 
erxgain = -3 ; Echolink receive gain adjustment
; Note: Gain is in db-volts (20logVI/VO)
etxgain = 3 ; Echolink transmit gain adjustment
; Note: Gain is in db-volts (20logVI/VO)
;eannmode = 1                           ; 1 = Say only node number on echolink connects (default = 1)
                                        ; 2 = say phonetic call sign only on echolink connects
                                        ; 3 = say phonetic call sign and node number on echolink connects
 
;controlstates = controlstates ; system control state stanza
 
scheduler = schedule ; scheduler stanza
functions = functions ; Repeater Function stanza
phone_functions = functions ; Phone Function stanza
link_functions = functions ; Link Function stanza
 
telemetry = telemetry ; Telemetry stanza
morse = morse ; Morse stanza
wait_times = wait-times ; Wait times stanza
 
context = radio ; dialing context for phone
callerid = "Repeater" <0000000000> ; callerid for phone calls
accountcode = RADIO                     ; account code (optional)
 
hangtime = 5000 ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms)
althangtime = 4000 ; longer squelch tail
totime = 180000 ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)
 
idrecording = |i YN1OB ; Main ID message
idtalkover = |i YN1OB ; Talkover ID message
; See Telemetry section Example: idrecording = rpt/nodenames/294130
idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms)
politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
 
unlinkedct = ct2 ; Send a this courtesy tone when the user unkeys if the node is not connected to any other nodes. (optional, default is none)
remotect = ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
linkunkeyct = ct8 ; sent when a transmission received over the link unkeys
;nolocallinkct = 0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
 
;connpgm = yourconnectprogram ; Disabled. Execute a program you specify on connect. (default)
; passes 2 command line arguments to your program: 
; 1. node number in this stanza (us)
; 2. node number being connected to us (them)
;discpgm = yourdisconnectprogram ; Disabled. Execute a program you specify on disconnect. (default)
; passes 2 command line arguments to your program: 
; 1. node number in this stanza (us)
; 2. node number being disconnected from us (them)
 
;lnkactenable = 0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only.
 
;lnkacttime = 1800 ; Link activity timer time in seconds.
;lnkactmacro = *52 ; Function to execute when link activity timer expires.
;lnkacttimerwarn = 30seconds ; Message to play when the link activity timer has 30 seconds left.
 
;remote_inact_timeout = ; Specifies the amount of time without keying from the link. Set to 0 to disable timeout. (15 * 60)
;remote_timeout = ; Session time out for remote base. Set to 0 to disable. (60 * 60)
;remote_timeout_warning_freq = ; 30
;remote_timeout_warning = ; (3 * 60) 
 
;nounkeyct = 0 ; Set to a 1 to eliminate courtesy tones and associated delays.
 
holdofftelem = 0 ; Hold off all telemetry when signal is present on receiver or from connected nodes
; except when an ID needs to be done and there is a signal coming from a connected node.
 
telemdefault = 1                        ; 0 = telemetry output off
                                        ; 1 = telemetry output on (default = 1)
                                        ; 2 = timed telemetry output on command execution and for a short time thereafter.
 
telemdynamic = 1                        ; 0 = disallow users to change the local telemetry setting with a COP command,
                                        ; 1 = Allow users to change the setting with a COP command. (default = 1)
 
;beaconing = 0 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US)
 
parrotmode = 0 ; 0 = Parrot Off (default = 0)
; 1 = Parrot On Command
; 2 = Parrot Always
; 3 = Parrot Once by Command
 
parrottime = 1000 ; Set the amount of time in milliseconds 
; to wait before parroting what was received
 
;rxnotch=1065,40                        ; (Optional) Notch a particular frequency for a specified
                                        ; b/w. app_rpt must have been compiled with
                                        ; the notch option
 
startup_macro = *31441
 
; nodenames = /var/lib/asterisk/sounds/rpt/nodenames.callsign ; Point to alternate nodename sound directory
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Need more information on these
 
;extnodes = extnodes-different ; section in extnodefile containing dynamic node information (optional)
;extnodefile = /foo/nodes ; Points to nodelist file containing dynamic node info default = /var/lib/asterisk/rpt_extnodes (optional)
;extnodefile2 = ; Is this a list of node files? Possible a list of private nodes or a list of static IPs for known nodes???? 
;nodenames = /foo/names         ; locaton of node sound files default = /var/lib/asterisk/sounds/rpt/nodenames
;archivedir = /tmp              ; defines and enables activity recording into specified directory (optional)
;monminblocks = 2048            ; Min 1K blocks to be left on partition (will not save monitor output if disk too full)
 
;                               ; The tailmessagetime,tailsquashedtime, and tailmessagelist need to be set
;                               ; to support tail messages. They can be omitted otherwise.
;tailmessagetime = 300000       ; Play a tail message every 5 mins
;tailsquashedtime = 30000       ; If squashed by another user,
;                               ; try again after 30 seconds
;tailmessagelist = msg1,msg2    ; list of messages to be played for tail message
 
; alt_functions
; ctgroup
; dphone_functions
; idtime
; iobase
; iospeed
; locallist
; mars Remote Base
; memory
; nobusyout
; nodes
; nolocallinkct
; notelemtx
; outxlat
; parrot
; propagate_phonedtmf
; rptnode
; rptinactmacro  Macro to execute when inactivity timer expires 
; rptinacttime   Inactivity timer time in seconds  (0 seconds disables feature)
; rxnotch Optional Audio notch
; simplexphonedelay
; tonemacro
; tonezone
; txlimits
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 
; *** Status Reporting ***
 
; Uncomment either group following two statpost lines to report the status of your node to stats.allstarlink.org
; depending on whether you are running ACID, Debian or Limey Linux.
; The difference is simply where your wget is located.
 
; ** For ACID and Debian ***
statpost_program = /usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null                       
statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates 
 
; ** For Limey Linux **
;statpost_program = /bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null                       
;statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates 
 
[functions]
 
; Prefix Functions
; *1 Disconnect Link
; *2 Monitor Link
; *3 Connect Link
; *4 Command Mode
; *5 Macros
; *6 User Functions
; *7 Connection Status/Functions
; *8 User Functions
; *9 User Functions
; *0 User Functions
 
; *A User Functions
; *B User Functions
; *C User Functions
; *D User Functions
 
 
; Mandatory Command Codes
 
1 = ilink,1 ; Disconnect specified link
2 = ilink,2 ; Connect specified link -- monitor only
3 = ilink,3 ; Connect specified link -- tranceive
4 = ilink,4 ; Enter command mode on specified link
70 = ilink,5 ; System status
99 = cop,6              ; PTT (phone mode only)
 
; End Mandatory Command Codes
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Macro Commands
5 = macro
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Autopatch Commands
; Note, This may be a good place for other 2 digit frequently used commands  
 
61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime = 20000  ; Autopatch up
62 = autopatchdn                                                 ; Autopatch down
 
; autopatchup can optionally take comma delimited setting=value pairs:
 
; context = string ; Override default context with "string"
; dialtime = ms ; Specify the max number of milliseconds between phone number digits (1000 milliseconds = 1 second)
; farenddisconnect = 1 ; Automatically disconnect when called party hangs up
; noct = 1 ; Don't send repeater courtesy tone during autopatch calls
; quiet = 1 ; Don't send dial tone, or connect messages. Do not send patch down message when called party hangs up
; Example: 123=autopatchup,dialtime=20000,noct=1,farenddisconnect=1
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Status Commands
 
; 1 - Force ID (global)
; 2 - Give Time of Day (global)
; 3 - Give software Version (global)
; 4 - Give GPS location info
; 5 - Last (dtmf) user
; 11 - Force ID (local only)
; 12 - Give Time of Day (local only)
 
721 = status,1          ; Force ID (global)
722 = status,2          ; Give Time of Day (global)
723 = status,3          ; Give software Version (global)
724 = status,4          ; Give GPS location info
725 = status,5          ; Last (dtmf) user
711 = status,11         ; Force ID (local only)
712 = status,12         ; Give Time of Day (local only)
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Link Commands
 
; 1 - Disconnect specified link
; 2 - Connect specified link -- monitor only
; 3 - Connect specified link -- tranceive
; 4 - Enter command mode on specified link
; 5 - System status
; 6 - Disconnect all links
; 7 - Last Node to Key Up
; 8 - Connect specified link -- local monitor only
; 9 - Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.
; 10 - Disconnect all RANGER links (except permalinks)
; 11 - Disconnect a previously permanently connected link
; 12 - Permanently connect specified link -- monitor only
; 13 - Permanently connect specified link -- tranceive
; 15 - Full system status (all nodes)
; 16 - Reconnect links disconnected with "disconnect all links"
; 17 - MDC test (for diag purposes)
; 18 - Permanently Connect specified link -- local monitor only
 
; ilink commands 1 through 5 are defined in the Mandatory Command section
 
806 = ilink,6 ; Disconnect all links
807 = ilink,7 ; Last Node to Key Up
808 = ilink,8 ; Connect specified link -- local monitor only
809 = ilink,9,294130,"Testing" ; would send a text message to node 294130 replace 294130 with 0 for all connected nodes
810 = ilink,10 ; Disconnect all RANGER links (except permalinks)
811 = ilink,11 ; Disconnect a previously permanently connected link
812 = ilink,12 ; Permanently connect specified link -- monitor only
813 = ilink,13 ; Permanently connect specified link -- tranceive
815 = ilink,15 ; Full system status (all nodes)
816 = ilink,16 ; Reconnect links disconnected with "disconnect all links"
817 = ilink,17 ; MDC test (for diag purposes)
818 = ilink 18 ; Permanently Connect specified link -- local monitor only
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Control operator (cop) functions. Change these to something other than these codes listed below!
 
901 = cop,1 ; System warm boot 
902 = cop,2 ; System enable
903 = cop,3 ; System disable
 
904 = cop,4 ; Test tone on/off (toggle)
905 = cop,5 ; Dump system variables on console (debug use only)
 
907 = cop,7 ; Time out timer enable
908 = cop,8 ; Time out timer disable
 
909 = cop,9 ; Autopatch enable
910 = cop,10 ; Autopatch disable
 
911 = cop,11 ; User linking functions enable
912 = cop,12 ; User linking functions disable
 
913 = cop,13 ; Query system control state
914 = cop,14 ; Set system control state
 
915 = cop,15 ; Scheduler enable
916 = cop,16 ; Scheduler disable
 
917 = cop,17 ; User functions enable (time, id, etc)
918 = cop,18 ; User functions disable
 
919 = cop,19 ; Select alternate hang time (althangtime)
920 = cop,20 ; Select standard hangtime (hangtime)
 
921 = cop,21 ; Enable Parrot Mode
922 = cop,22 ; Disable Parrot Mode
923 = cop,23 ; Birdbath (Current Parrot Cleanup/Flush)
 
924 = cop,24 ; Flush all telemetry
925 = cop,25 ; Query last node un-keyed
926 = cop,26 ; Query all nodes keyed/unkeyed
927 = cop,27 ; Reset DAQ minimum on a pin
928 = cop,28 ; Reset DAQ maximum on a pin
 
930 = cop,30 ; Recall Memory Setting in Attached Xcvr
 
931 = cop,31 ; Channel Selector for Parallel Programmed Xcvr
 
932 = cop,32 ; Touchtone pad test: command + Digit string + # to playback all digits pressed
 
933 = cop,33 ; Local Telemetry Output Enable
934 = cop,34 ; Local Telemetry Output Disable
935 = cop,35 ; Local Telemetry Output on Demand
 
936 = cop,36 ; Foreign Link Local Output Path Enable
937 = cop,37 ; Foreign Link Local Output Path Disable
938 = cop,38 ; Foreign Link Local Output Path Follows Local Telemetry
939 = cop,39 ; Foreign Link Local Output Path on Demand
 
942 = cop,42 ; Echolink announce node # only
943 = cop,43 ; Echolink announce node Callsign only
944 = cop,44 ; Echolink announce node # & Callsign
 
945 = cop,45 ; Link Activity timer enable
945 = cop,46 ; Link Activity timer disable
947 = cop,47 ; Reset "Link Config Changed" Flag 
 
948 = cop,48 ; Send Page Tone (Tone specs separated by parenthesis)
 
949 = cop,49 ; Disable incoming connections (control state noice)
950 = cop,50 ; Enable incoming connections (control state noicd)
 
951 = cop,51 ; Enable sleep mode
952 = cop,52 ; Disable sleep mode
953 = cop,53 ; Wake up from sleep
954 = cop,54 ; Go to sleep
955 = cop,55 ; Parrot Once if parrot mode is disabled
 
956 = cop,56                            ; Rx CTCSS Enable
957 = cop,57                            ; Rx CTCSS Disable
 
958 = cop.58                            ; Tx CTCSS On Input only Enable
959 = cop,59                            ; Tx CTCSS On Input only Disable
 
960 = cop,60                            ; Send MDC-1200 Burst (cop,60,type,UnitID[,DestID,SubCode])
                                        ; Type is 'I' for PttID, 'E' for Emergency, and 'C' for Call
                                        ; (SelCall or Alert), or 'SX' for STS (ststus), where X is 0-F.
                                        ; DestID and subcode are only specified for  the 'C' type message.
                                        ; UnitID is the local systems UnitID. DestID is the MDC1200 ID of
                                        ; the radio being called, and the subcodes are as follows:
                                        ; Subcode '8205' is Voice Selective Call for Spectra ('Call')
                                        ; Subcode '8015' is Voice Selective Call for Maxtrac ('SC') or
                                        ; Astro-Saber('Call')
                                        ; Subcode '810D' is Call Alert (like Maxtrac 'CA')
 
961 = cop,61                            ; Send Message to USB to control GPIO pins (cop,61,GPIO1=0[,GPIO4=1].....)
962 = cop,62                            ; Send Message to USB to control GPIO pins, quietly (cop,62,GPIO1=0[,GPIO4=1].....)
 
963 = cop,63                            ; Send pre-configred APRSTT notification (cop,63,CALL[,OVERLAYCHR])
964 = cop,64                            ; Send pre-configred APRSTT notification, quietly (cop,64,CALL[,OVERLAYCHR])
965 = cop,65                            ; Send POCSAG page (equipped channel types only)
 
[functions-remote]
 
0 = remote,1                            ; Retrieve Memory
1 = remote,2                            ; Set freq.
2 = remote,3                            ; Set tx PL tone
3 = remote,4                            ; Set rx PL tone
40 = remote,100                         ; Rx PL off
41 = remote,101                         ; Rx PL on
42 = remote,102                         ; Tx PL off
43 = remote,103                         ; Tx PL on
44 = remote,104                         ; Low Power
45 = remote,105                         ; Medium Power
46 = remote,106                         ; High Power
711 = remote,107                        ; Bump -20
714 = remote,108                        ; Bump -100
717 = remote,109                        ; Bump -500
713 = remote,110                        ; Bump +20
716 = remote,111                        ; Bump +100
719 = remote,112                        ; Bump +500
721 = remote,113                        ; Scan - slow
724 = remote,114                        ; Scan - quick
727 = remote,115                        ; Scan - fast
723 = remote,116                        ; Scan + slow
726 = remote,117                        ; Scan + quick
729 = remote,118                        ; Scan + fast
79 = remote,119                         ; Tune
51 = remote,5                           ; Long status query
52 = remote,140 ; Short status query
67 = remote,210 ; Send a *
69 = remote,211 ; Send a #
;91 = remote,99,CALLSIGN,LICENSETAG     ; Remote base login.
                                        ; Define a different dtmf sequence for each user which is
                                        ; authorized to use the remote base to control access to it.
                                        ; For examble 9139583=remote,99,WB6NIL,G would grant access to
                                        ; the remote base and announce WB6NIL as being logged in.
                                        ; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to
                                        ; the remote base and announce WA6ZFT as being logged in.
                                        ; When the remote base is disconnected from the originating node, the
                                        ; user will be logged out. The LICENSETAG argument is used to enforce
; tx frequency limits. See [txlimits] below.
85 = cop,6                              ; Remote base telephone key
 
 
[telemetry]
 
; Telemetry entries can be shared across all repeaters, or defined for each repeater.
; Can be a tone sequence, morse string, or a file
;
; |t - Tone escape sequence
;
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
; Single frequencies are created by setting freq1 or freq2 to zero.
;
; |m - Morse escape sequence
; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
; [morse] section.
;
; Follow with an alphanumeric string
;
; |i - Morse ID escape sequence
;
; Sends Morse code at the ID amplitude and ID frequency as defined in the
; [morse] section.
;
; path/to/sound/file/without/extension
;
; Send the sound if in place of a constructed tone. Do not include the file extension
; Example: ct8 = rpt/bloop
; Example: idrecording = rpt/nodenames/294130
 
ct1 = |t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2 = |t(660,880,150,2048)  
ct3 = |t(440,0,150,4096) 
ct4 = |t(550,0,150,2048)
ct5 = |t(660,0,150,2048)
ct6 = |t(880,0,150,2048)
ct7 = |t(660,440,150,2048)
ct8 = |t(700,1100,150,2048)
ranger = |t(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,150,0)
remotemon = |t(1209,0,50,2048)                                  ; local courtesy tone when receive only
remotetx = |t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) ; local courtesy tone when linked Trancieve mode
cmdmode = |t(900,903,200,2048)
functcomplete = |t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
remcomplete = |t(650,0,100,2048)(0,0,100,0)(650,0,100,2048)(0,0,100,0)(650,0,100,2048)
pfxtone = |t(350,440,30000,3072)
patchup = rpt/callproceeding
patchdown = rpt/callterminated
 
; As far as what the numbers mean,
; (000,000,010,000)
;   |   |   |   |-------amplitude
;   |   |   |-------------duration
;   |   |-------------------Tone 2
;   |-------------------------Tone 1
 
; So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude.
; Use it for a delay.  Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter)
; The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048.
 
; Morse code parameters, these are common to all repeaters.
 
[morse]
speed = 20 ; Approximate speed in WPM
frequency = 800 ; Morse Telemetry Frequency
amplitude = 4096 ; Morse Telemetry Amplitude
idfrequency = 1065 ; Morse ID Frequency
idamplitude = 1024 ; Morse ID Amplitude
 
;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;
 
[wait-times]                                                                                                 
telemwait = 2000                        ; Time to wait before sending most telemetry
idwait = 500                            ; Time to wait before starting ID
unkeywait = 2000                        ; Time to wait after unkey before sending CT's and link telemetry
calltermwait = 2000                     ; Time to wait before announcing "call terminated"
 
;
; This is where you define your nodes which cam be connected to.
;
 
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.
 
294130 = radio@....0.1:4569/294130,NONE ; This must be changed to your node number
1441 = radio@....0.1:4569/1441,NONE           ; and iax port number if not the default
; Memories for remote bases
 
[memory]
;00 = 146.580,100.0,m
;01 = 147.030,103.5,m+t
;02 = 147.240,103.5,m+t
;03 = 147.765,79.7,m-t
;04 = 146.460,100.0,m
;05 = 146.550,100.0,m
 
; Place command macros here
 
[macro]
;1 = *32011#
;2 = *12001*12011*12043*12040*12050*12060*12009*12002*12003*12004*1113*12030#
;3 = *32001*32011*32050*32030*32060#
 
 
; Data Acquisition configuration
 
;[daq-list]
;device = device_name1
;device = device_name2
 
;Where: device_name1 and device_name2 are stanzas you define in this file
 
;device = daq-cham-1
 
; Device name
 
;[daq-cham-1] ; Defined in [daq-list]
;hwtype = uchameleon ; DAQ hardware type
;devnode = /dev/ttyUSB0 ; DAQ device node (if required)
;1 = inadc ; Pin definition for an ADC channel
;2 = inadc
;3 = inadc
;4 = inadc
;5 = inadc
;6 = inadc
;7 = inadc
;8 = inadc
;9 = inp ; Pin definition for an input with a weak pullup resistor
;10 = inp
;11 = inp
;12 = inp
;13 = in ; Pin definition for an input without a weak pullup resistor
;14 = out ; Pin definition for an output
;15 = out
;16 = out
;17 = out
;18 = out
 
;[meter-faces]
 
;face = scale(scalepre,scalediv,scalepost),word/?,...
;
; scalepre = offset to add before dividing with scalediv
; scalediv = full scale/number of whole units (e.g. 256/20 or 12.8 for 20 volts).
; scalepost = offset to add after dividing with scalediv
;
;face = range(X-Y:word,X2-Y2:word,...),word/?,...
;face = bit(low-word,high-word),word/?,...
;
; word/? is either a word in /var/lib/asterisk/sounds or one of its subdirectories,
; or a question mark which is  a placeholder for the measured value.
;
;
; Battery voltage 0-20 volts
;batvolts = scale(0,12.8,0),rpt/thevoltageis,?,ha/volts
; 4 quadrant wind direction
;winddir = range(0-33:north,34-96:west,97-160:south,161-224:east,225-255:north),rpt/thewindis,?
; LM34 temperature sensor with 130 deg. F full scale
;lm34f = scale(0,1.969,0),rpt/thetemperatureis,?,degrees,fahrenheit
; Status poll (non alarmed)
;light = bit(ha/off,ha/on),ha/light,?
 
;[alarms]
;
;tag = device,pin,node,ignorefirst,func-low,func-hi
;
;tag = a unique name for the alarm
;device = daq device to poll
;pin = the device pin to be monitored
;ignorefirstalarm = set to 1 to throwaway first alarm event, or 0 to report it
;node = the node number to execute the function on
;func-low = the DTMF function to execute on a high to low transition
;func-high = the DTMF function to execute on a low to high transition
;
; a  '-' as a function name is shorthand for no-operation
;
;door = daq-cham-1,9,1,2017,*7,-
;pwrfail = daq-cham-1,10,0,2017,*911111,-
;
; Control states
; Allow several control operator functions to be changed at once using one command (good for scheduling)
;
;[controlstates]                                                          
;statenum = copcmd,[copcmd]...                                                  
;0 = rptena,lnkena,apena,totena,ufena,noicd  ; Normal operation                                  
;1 = rptena,lnkena,apdis,totdis,ufena,noice  ; Net and news operation                                             
;2 = rptena,lnkdis,apdis,totena,ufdis,noice  ; Repeater only operation
 
; Scheduler - execute a macro at a given time
 
[schedule]                                                                      
;dtmf_function =  m h dom mon dow  ; ala cron, star is implied                                                  
;2 = 00 00 * * *   ; at midnight, execute macro 2.       
 
#includeifexists custom/rpt.conf
 
       
 


Tito Lopez - YN1OB
 

MMDVM.ini

[General]
Callsign=YN1OB
Id=710100211
Timeout=180
Duplex=0
 
[Info]
RXFrequency=147710000
TXFrequency=147710000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Cloud Nica
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
 
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
 
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24
 
[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0
 
[D-Star]
Enable=0
Module=B
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[P25]
Enable=0
NAC=293
 
[NXDN]
Enable=0
RAN=1
Id=
 
[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
[DMR Network]
Enable=1
Address=207.246.76.153
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=192.227.231.172
GatewayPort=42000
Debug=0
 
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


AB.ini

; Analog_Bridge configuration file.
;   This file should be placed in either /etc or it can be
;   supplied as a path on the Analog_Bridge command line.
 
; The best way to think of this file is that there are two main sections, the USRP (analog audio) and
; AMBE_AUDIO (compressed audio).  Analog_Bridge will take everything sent to the USRP port and
; encode it for transmission on the AMBE_AUDIO port.  The encoder will use the format defined in ambeMode.
; As you might expect, the reverse direction is defined too.
 
; Analog_Bridge supports include files. More on this later...
include = dvsm.macro
; include = asl.macro
 
; General Section describes settings for Analog_Bridge itself.
[GENERAL]
logLevel = 2                            ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
 
; Metadata management
exportMetadata = true                   ; Export metadata to USRP partner (transcode setups require this)
transferRootDir = /tmp ; Export database files to USRP partner
subscriberFile = /var/lib/dvswitch/subscriber_ids.csv   ; DMR ID to callsign lookup data
 
; General vocoder setup information
decoderFallBack = true                  ; Allow software AMBE decoding if a hardware decoder is not found
useEmulator = true                      ; Use the MD380 AMBE emulator for AMBE72 (DMR/YSFN/NXDN)
emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server
 
pcmPort = 2222                          ; UDP port to send to the WebProxy
 
; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]
address = 127.0.0.1                     ; IP address of xx_Bridge
txPort = 31103                         ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)
 
; The metadata below is used when ASL is the source since it does not have any concept of digital modes
gatewayDmrId = 7101002                  ; ID to use when transmitting from Analog_Bridge 7 digit ID
repeaterID = 710100211                  ; ID of source repeater 7 digit ID plus 2 digit SSID
txTg = 710                                ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
colorCode = 1                           ; Color Code to assign DMR frames
 
; Information for USRP channel driver.  This interface uses PCM to transfer audio information
; There are two typical configurations, ASL and Transcode.  ASL (AllstarLink) is for analog clients connected
; to a digital network.  Transcode is when Analog_Bridge actually points its PCM interfaces back at itself, 
; causing a TLV <-- (pcm <--> pcm) --> TLV type of architecture.
;   When using ASL, this matches the rpt.conf ASL file with a setting like:
;   rxchannel = usrp/127.0.0.1:34001:32001
;   When Transcoding, make two ini files and set txPort equal to the other instance rxPort (crossover).  Launch
;   each instance with its own ini file.
[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Analog_Reflector, Allstar/Asterisk or another Analog_Bridge)
txPort = 54010                          ; Transmit USRP frames on this port
rxPort = 54010                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_USE_GAIN              ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC)
usrpGain = 4.00                         ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
usrpAGC = -20,10,100                    ; Set the agc threshold (db), slope (db) and decay (ms)
tlvAudio = AUDIO_USE_GAIN               ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.25                          ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
 
[MACROS]
 
; Where the macros are
; xxxx=yyyy
; xxxx is the dial string to match
; yyyy is the command line to execute
 
; xxxx must be preceded by a *
; xxxx can be any string (alphanumeric)
; yyyy is the command to execute
; yyyy will replace xxxx in the dial string
; arguments follow the macro name with a # delimiter
 
; For example using macro "5678" above would look like:
; *5678#9876
 
; Which would invoke:
; echo 9876
 
; Information for DV3000 hardware decoder
;   There are two configuration modes: IP (AMBEServer) and serial (direct connect hardware)
;   Use top server and port if using AMBEServer
;   Use bottom server/port and serial = true if using the DV3000u (thumbdv)
;   Did you run AMBETest4.py before using this?
[DV3000]
; address = 127.0.0.1                 ; IP address of AMBEServer
; rxPort = 2460                       ; Port of AMBEServer
; address = /dev/ttyUSB0              ; Device of DV3000U on this machine
; baud = 460800                       ; Baud rate of the dongle (230400 or 460800)
; serial = true                       ; Use serial=true for direct connect or serial=false for AMBEServer


Rpt.conf

; Radio Repeater configuration file (for use with app_rpt)
 
 
; Your Repeater
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
[1441]
rxchannel = USRP/127.0.0.1:34001:32001  ; Use the USRP channel driver. Must be enabled in modules.conf
                                        ; 127.0.0.1 = IP of the target application
                                        ; 34001 = UDP port the target application is listening on
                                        ; 32001 = UDP port ASL is listening on
 
duplex = 0                              ; 0 = Half duplex with no telemetry tones or hang time. Ah, but Allison STILL talks!
 
hangtime = 0                            ; squelch tail hang time 0
althangtime = 0                         ; longer squelch tail hang time 0
 
holdofftelem = 1                        ; Hold off all telemetry when signal is present on receiver or from connected nodes
                                        ; except when an ID needs to be done and there is a signal coming from a connected node.
 
telemdefault = 0                        ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me.
 
telemdynamic = 0                        ; 0 = disallow users to change the local telemetry setting with a COP command,
 
linktolink = no                         ; disables forcing physical half-duplex operation of main repeater while
                                        ; still keeping half-duplex semantics (optional)
 
nounkeyct = 1                           ; Set to a 1 to eliminate courtesy tones and associated delays.
 
totime = 180000                         ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)
 
idrecording = |ie                       ; id recording or morse string see http://ohnosec.org/drupal/node/87
idtalkover = |ie                        ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129
 
 
[294130] ; Change this to your assigned node number 
 
                                        ; Must also be enabled in modules.conf
; Rx audio/signalling channel. Choose ONLY 1 per node stanza
 
; Enable the selected channel driver in modules.conf !!!
rxchannel = dahdi/pseudo         ; No radio (hub)
; rxchannel = SimpleUSB/usb_294130 ; SimpleUSB 
; rxchannel = Pi/1                      ; Raspberry Pi PiTA 
; rxchannel = Radio/usb_294130 ; USBRadio (DSP) 
; rxchannel = Dahdi/1 ; PCI Quad card 
; rxchannel = Beagle/1 ; BeagleBoard 
; rxchannel = USRP/127.0.0.1:34001:32001; Use the USRP channel driver. Must be enabled in modules.conf
; 127.0.0.1 = IP of the target application
; 34001 = UDP port the target application is listening on
; 32001 = UDP port Asterisk is listening on
 
duplex = 1                              ; 0 = Half duplex with no telemetry tones or hang time.
                                        ;     Special Case: Full duplex if linktolink is set to yes.
                                        ;     This mode is preferred when interfacing with an external multiport repeater controller.
;     Comment out idrecording and idtalkover to suppress IDs also
                                        ; 1 = Half duplex with telemetry tones and hang time. Does not repeat audio.
                                        ;     This mode is preferred when interfacing a simplex node.
                                        ; 2 = Full Duplex with telemetry tones and hang time.
                                        ;     This mode is preferred when interfacing a repeater.
                                        ; 3 = Full Duplex with telemetry tones and hang time, but no repeated audio.
                                        ; 4 = Full Duplex with telemetry tones and hang time. Repeated audio only when the autopatch is down.
 
linktolink = no ; disables forcing physical half-duplex operation of main repeater while
; still keeping half-duplex semantics (optional)
 
linkmongain = 0 ; Link Monitor Gain adjusts the audio level of monitored nodes when a signal from another node or the local receiver is received.
; If linkmongain is set to a negative number the monitored audio will decrease by the set amount in db.
; If linkmongain set to a positive number monitored audio will increase by the set amount in db.
; The value of linkmongain is in db. The default value is 0 db.
 
erxgain = -3 ; Echolink receive gain adjustment
; Note: Gain is in db-volts (20logVI/VO)
etxgain = 3 ; Echolink transmit gain adjustment
; Note: Gain is in db-volts (20logVI/VO)
;eannmode = 1                           ; 1 = Say only node number on echolink connects (default = 1)
                                        ; 2 = say phonetic call sign only on echolink connects
                                        ; 3 = say phonetic call sign and node number on echolink connects
 
;controlstates = controlstates ; system control state stanza
 
scheduler = schedule ; scheduler stanza
functions = functions ; Repeater Function stanza
phone_functions = functions ; Phone Function stanza
link_functions = functions ; Link Function stanza
 
telemetry = telemetry ; Telemetry stanza
morse = morse ; Morse stanza
wait_times = wait-times ; Wait times stanza
 
context = radio ; dialing context for phone
callerid = "Repeater" <0000000000> ; callerid for phone calls
accountcode = RADIO                     ; account code (optional)
 
hangtime = 5000 ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms)
althangtime = 4000 ; longer squelch tail
totime = 180000 ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)
 
idrecording = |i YN1OB ; Main ID message
idtalkover = |i YN1OB ; Talkover ID message
; See Telemetry section Example: idrecording = rpt/nodenames/294130
idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms)
politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
 
unlinkedct = ct2 ; Send a this courtesy tone when the user unkeys if the node is not connected to any other nodes. (optional, default is none)
remotect = ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
linkunkeyct = ct8 ; sent when a transmission received over the link unkeys
;nolocallinkct = 0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
 
;connpgm = yourconnectprogram ; Disabled. Execute a program you specify on connect. (default)
; passes 2 command line arguments to your program: 
; 1. node number in this stanza (us)
; 2. node number being connected to us (them)
;discpgm = yourdisconnectprogram ; Disabled. Execute a program you specify on disconnect. (default)
; passes 2 command line arguments to your program: 
; 1. node number in this stanza (us)
; 2. node number being disconnected from us (them)
 
;lnkactenable = 0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only.
 
;lnkacttime = 1800 ; Link activity timer time in seconds.
;lnkactmacro = *52 ; Function to execute when link activity timer expires.
;lnkacttimerwarn = 30seconds ; Message to play when the link activity timer has 30 seconds left.
 
;remote_inact_timeout = ; Specifies the amount of time without keying from the link. Set to 0 to disable timeout. (15 * 60)
;remote_timeout = ; Session time out for remote base. Set to 0 to disable. (60 * 60)
;remote_timeout_warning_freq = ; 30
;remote_timeout_warning = ; (3 * 60) 
 
;nounkeyct = 0 ; Set to a 1 to eliminate courtesy tones and associated delays.
 
holdofftelem = 0 ; Hold off all telemetry when signal is present on receiver or from connected nodes
; except when an ID needs to be done and there is a signal coming from a connected node.
 
telemdefault = 1                        ; 0 = telemetry output off
                                        ; 1 = telemetry output on (default = 1)
                                        ; 2 = timed telemetry output on command execution and for a short time thereafter.
 
telemdynamic = 1                        ; 0 = disallow users to change the local telemetry setting with a COP command,
                                        ; 1 = Allow users to change the setting with a COP command. (default = 1)
 
;beaconing = 0 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US)
 
parrotmode = 0 ; 0 = Parrot Off (default = 0)
; 1 = Parrot On Command
; 2 = Parrot Always
; 3 = Parrot Once by Command
 
parrottime = 1000 ; Set the amount of time in milliseconds 
; to wait before parroting what was received
 
;rxnotch=1065,40                        ; (Optional) Notch a particular frequency for a specified
                                        ; b/w. app_rpt must have been compiled with
                                        ; the notch option
 
startup_macro = *31441
 
; nodenames = /var/lib/asterisk/sounds/rpt/nodenames.callsign ; Point to alternate nodename sound directory
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Need more information on these
 
;extnodes = extnodes-different ; section in extnodefile containing dynamic node information (optional)
;extnodefile = /foo/nodes ; Points to nodelist file containing dynamic node info default = /var/lib/asterisk/rpt_extnodes (optional)
;extnodefile2 = ; Is this a list of node files? Possible a list of private nodes or a list of static IPs for known nodes???? 
;nodenames = /foo/names         ; locaton of node sound files default = /var/lib/asterisk/sounds/rpt/nodenames
;archivedir = /tmp              ; defines and enables activity recording into specified directory (optional)
;monminblocks = 2048            ; Min 1K blocks to be left on partition (will not save monitor output if disk too full)
 
;                               ; The tailmessagetime,tailsquashedtime, and tailmessagelist need to be set
;                               ; to support tail messages. They can be omitted otherwise.
;tailmessagetime = 300000       ; Play a tail message every 5 mins
;tailsquashedtime = 30000       ; If squashed by another user,
;                               ; try again after 30 seconds
;tailmessagelist = msg1,msg2    ; list of messages to be played for tail message
 
; alt_functions
; ctgroup
; dphone_functions
; idtime
; iobase
; iospeed
; locallist
; mars Remote Base
; memory
; nobusyout
; nodes
; nolocallinkct
; notelemtx
; outxlat
; parrot
; propagate_phonedtmf
; rptnode
; rptinactmacro  Macro to execute when inactivity timer expires 
; rptinacttime   Inactivity timer time in seconds  (0 seconds disables feature)
; rxnotch Optional Audio notch
; simplexphonedelay
; tonemacro
; tonezone
; txlimits
 
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
 
; *** Status Reporting ***
 
; Uncomment either group following two statpost lines to report the status of your node to stats.allstarlink.org
; depending on whether you are running ACID, Debian or Limey Linux.
; The difference is simply where your wget is located.
 
; ** For ACID and Debian ***
statpost_program = /usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null                       
statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates 
 
; ** For Limey Linux **
;statpost_program = /bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null                       
;statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates 
 
[functions]
 
; Prefix Functions
; *1 Disconnect Link
; *2 Monitor Link
; *3 Connect Link
; *4 Command Mode
; *5 Macros
; *6 User Functions
; *7 Connection Status/Functions
; *8 User Functions
; *9 User Functions
; *0 User Functions
 
; *A User Functions
; *B User Functions
; *C User Functions
; *D User Functions
 
 
; Mandatory Command Codes
; https://wiki.allstarlink.org/wiki/AllStar_Link_Standard_Commands
 
1 = ilink,1 ; Disconnect specified link
2 = ilink,2 ; Connect specified link -- monitor only
3 = ilink,3 ; Connect specified link -- tranceive
4 = ilink,4 ; Enter command mode on specified link
70 = ilink,5 ; System status
99 = cop,6              ; PTT (phone mode only)
 
; End Mandatory Command Codes
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Macro Commands
5 = macro
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Autopatch Commands
; Note, This may be a good place for other 2 digit frequently used commands  
 
61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime = 20000  ; Autopatch up
62 = autopatchdn                                                 ; Autopatch down
 
; autopatchup can optionally take comma delimited setting=value pairs:
 
; context = string ; Override default context with "string"
; dialtime = ms ; Specify the max number of milliseconds between phone number digits (1000 milliseconds = 1 second)
; farenddisconnect = 1 ; Automatically disconnect when called party hangs up
; noct = 1 ; Don't send repeater courtesy tone during autopatch calls
; quiet = 1 ; Don't send dial tone, or connect messages. Do not send patch down message when called party hangs up
; Example: 123=autopatchup,dialtime=20000,noct=1,farenddisconnect=1
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Status Commands
 
; 1 - Force ID (global)
; 2 - Give Time of Day (global)
; 3 - Give software Version (global)
; 4 - Give GPS location info
; 5 - Last (dtmf) user
; 11 - Force ID (local only)
; 12 - Give Time of Day (local only)
 
721 = status,1          ; Force ID (global)
722 = status,2          ; Give Time of Day (global)
723 = status,3          ; Give software Version (global)
724 = status,4          ; Give GPS location info
725 = status,5          ; Last (dtmf) user
711 = status,11         ; Force ID (local only)
712 = status,12         ; Give Time of Day (local only)
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Link Commands
 
; 1 - Disconnect specified link
; 2 - Connect specified link -- monitor only
; 3 - Connect specified link -- tranceive
; 4 - Enter command mode on specified link
; 5 - System status
; 6 - Disconnect all links
; 7 - Last Node to Key Up
; 8 - Connect specified link -- local monitor only
; 9 - Send Text Message (9,<destnodeno or 0 (for all)>,Message Text, etc.
; 10 - Disconnect all RANGER links (except permalinks)
; 11 - Disconnect a previously permanently connected link
; 12 - Permanently connect specified link -- monitor only
; 13 - Permanently connect specified link -- tranceive
; 15 - Full system status (all nodes)
; 16 - Reconnect links disconnected with "disconnect all links"
; 17 - MDC test (for diag purposes)
; 18 - Permanently Connect specified link -- local monitor only
 
; ilink commands 1 through 5 are defined in the Mandatory Command section
 
806 = ilink,6 ; Disconnect all links
807 = ilink,7 ; Last Node to Key Up
808 = ilink,8 ; Connect specified link -- local monitor only
809 = ilink,9,294130,"Testing" ; would send a text message to node 294130 replace 294130 with 0 for all connected nodes
810 = ilink,10 ; Disconnect all RANGER links (except permalinks)
811 = ilink,11 ; Disconnect a previously permanently connected link
812 = ilink,12 ; Permanently connect specified link -- monitor only
813 = ilink,13 ; Permanently connect specified link -- tranceive
815 = ilink,15 ; Full system status (all nodes)
816 = ilink,16 ; Reconnect links disconnected with "disconnect all links"
817 = ilink,17 ; MDC test (for diag purposes)
818 = ilink 18 ; Permanently Connect specified link -- local monitor only
 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 
; Control operator (cop) functions. Change these to something other than these codes listed below!
 
901 = cop,1 ; System warm boot 
902 = cop,2 ; System enable
903 = cop,3 ; System disable
 
904 = cop,4 ; Test tone on/off (toggle)
905 = cop,5 ; Dump system variables on console (debug use only)
 
907 = cop,7 ; Time out timer enable
908 = cop,8 ; Time out timer disable
 
909 = cop,9 ; Autopatch enable
910 = cop,10 ; Autopatch disable
 
911 = cop,11 ; User linking functions enable
912 = cop,12 ; User linking functions disable
 
913 = cop,13 ; Query system control state
914 = cop,14 ; Set system control state
 
915 = cop,15 ; Scheduler enable
916 = cop,16 ; Scheduler disable
 
917 = cop,17 ; User functions enable (time, id, etc)
918 = cop,18 ; User functions disable
 
919 = cop,19 ; Select alternate hang time (althangtime)
920 = cop,20 ; Select standard hangtime (hangtime)
 
921 = cop,21 ; Enable Parrot Mode
922 = cop,22 ; Disable Parrot Mode
923 = cop,23 ; Birdbath (Current Parrot Cleanup/Flush)
 
924 = cop,24 ; Flush all telemetry
925 = cop,25 ; Query last node un-keyed
926 = cop,26 ; Query all nodes keyed/unkeyed
927 = cop,27 ; Reset DAQ minimum on a pin
928 = cop,28 ; Reset DAQ maximum on a pin
 
930 = cop,30 ; Recall Memory Setting in Attached Xcvr
 
931 = cop,31 ; Channel Selector for Parallel Programmed Xcvr
 
932 = cop,32 ; Touchtone pad test: command + Digit string + # to playback all digits pressed
 
933 = cop,33 ; Local Telemetry Output Enable
934 = cop,34 ; Local Telemetry Output Disable
935 = cop,35 ; Local Telemetry Output on Demand
 
936 = cop,36 ; Foreign Link Local Output Path Enable
937 = cop,37 ; Foreign Link Local Output Path Disable
938 = cop,38 ; Foreign Link Local Output Path Follows Local Telemetry
939 = cop,39 ; Foreign Link Local Output Path on Demand
 
942 = cop,42 ; Echolink announce node # only
943 = cop,43 ; Echolink announce node Callsign only
944 = cop,44 ; Echolink announce node # & Callsign
 
945 = cop,45 ; Link Activity timer enable
945 = cop,46 ; Link Activity timer disable
947 = cop,47 ; Reset "Link Config Changed" Flag 
 
948 = cop,48 ; Send Page Tone (Tone specs separated by parenthesis)
 
949 = cop,49 ; Disable incoming connections (control state noice)
950 = cop,50 ; Enable incoming connections (control state noicd)
 
951 = cop,51 ; Enable sleep mode
952 = cop,52 ; Disable sleep mode
953 = cop,53 ; Wake up from sleep
954 = cop,54 ; Go to sleep
955 = cop,55 ; Parrot Once if parrot mode is disabled
 
956 = cop,56                            ; Rx CTCSS Enable
957 = cop,57                            ; Rx CTCSS Disable
 
958 = cop.58                            ; Tx CTCSS On Input only Enable
959 = cop,59                            ; Tx CTCSS On Input only Disable
 
960 = cop,60                            ; Send MDC-1200 Burst (cop,60,type,UnitID[,DestID,SubCode])
                                        ; Type is 'I' for PttID, 'E' for Emergency, and 'C' for Call
                                        ; (SelCall or Alert), or 'SX' for STS (ststus), where X is 0-F.
                                        ; DestID and subcode are only specified for  the 'C' type message.
                                        ; UnitID is the local systems UnitID. DestID is the MDC1200 ID of
                                        ; the radio being called, and the subcodes are as follows:
                                        ; Subcode '8205' is Voice Selective Call for Spectra ('Call')
                                        ; Subcode '8015' is Voice Selective Call for Maxtrac ('SC') or
                                        ; Astro-Saber('Call')
                                        ; Subcode '810D' is Call Alert (like Maxtrac 'CA')
 
961 = cop,61                            ; Send Message to USB to control GPIO pins (cop,61,GPIO1=0[,GPIO4=1].....)
962 = cop,62                            ; Send Message to USB to control GPIO pins, quietly (cop,62,GPIO1=0[,GPIO4=1].....)
 
963 = cop,63                            ; Send pre-configred APRSTT notification (cop,63,CALL[,OVERLAYCHR])
964 = cop,64                            ; Send pre-configred APRSTT notification, quietly (cop,64,CALL[,OVERLAYCHR])
965 = cop,65                            ; Send POCSAG page (equipped channel types only)
 
[functions-remote]
 
0 = remote,1                            ; Retrieve Memory
1 = remote,2                            ; Set freq.
2 = remote,3                            ; Set tx PL tone
3 = remote,4                            ; Set rx PL tone
40 = remote,100                         ; Rx PL off
41 = remote,101                         ; Rx PL on
42 = remote,102                         ; Tx PL off
43 = remote,103                         ; Tx PL on
44 = remote,104                         ; Low Power
45 = remote,105                         ; Medium Power
46 = remote,106                         ; High Power
711 = remote,107                        ; Bump -20
714 = remote,108                        ; Bump -100
717 = remote,109                        ; Bump -500
713 = remote,110                        ; Bump +20
716 = remote,111                        ; Bump +100
719 = remote,112                        ; Bump +500
721 = remote,113                        ; Scan - slow
724 = remote,114                        ; Scan - quick
727 = remote,115                        ; Scan - fast
723 = remote,116                        ; Scan + slow
726 = remote,117                        ; Scan + quick
729 = remote,118                        ; Scan + fast
79 = remote,119                         ; Tune
51 = remote,5                           ; Long status query
52 = remote,140 ; Short status query
67 = remote,210 ; Send a *
69 = remote,211 ; Send a #
;91 = remote,99,CALLSIGN,LICENSETAG     ; Remote base login.
                                        ; Define a different dtmf sequence for each user which is
                                        ; authorized to use the remote base to control access to it.
                                        ; For examble 9139583=remote,99,WB6NIL,G would grant access to
                                        ; the remote base and announce WB6NIL as being logged in.
                                        ; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to
                                        ; the remote base and announce WA6ZFT as being logged in.
                                        ; When the remote base is disconnected from the originating node, the
                                        ; user will be logged out. The LICENSETAG argument is used to enforce
; tx frequency limits. See [txlimits] below.
85 = cop,6                              ; Remote base telephone key
 
 
[telemetry]
 
; Telemetry entries can be shared across all repeaters, or defined for each repeater.
; Can be a tone sequence, morse string, or a file
;
; |t - Tone escape sequence
;
; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude)
; Single frequencies are created by setting freq1 or freq2 to zero.
;
; |m - Morse escape sequence
; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the
; [morse] section.
;
; Follow with an alphanumeric string
;
; |i - Morse ID escape sequence
;
; Sends Morse code at the ID amplitude and ID frequency as defined in the
; [morse] section.
;
; path/to/sound/file/without/extension
;
; Send the sound if in place of a constructed tone. Do not include the file extension
; Example: ct8 = rpt/bloop
; Example: idrecording = rpt/nodenames/294130
 
ct1 = |t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2 = |t(660,880,150,2048)  
ct3 = |t(440,0,150,4096) 
ct4 = |t(550,0,150,2048)
ct5 = |t(660,0,150,2048)
ct6 = |t(880,0,150,2048)
ct7 = |t(660,440,150,2048)
ct8 = |t(700,1100,150,2048)
ranger = |t(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,150,0)
remotemon = |t(1209,0,50,2048)                                  ; local courtesy tone when receive only
remotetx = |t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000) ; local courtesy tone when linked Trancieve mode
cmdmode = |t(900,903,200,2048)
functcomplete = |t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
remcomplete = |t(650,0,100,2048)(0,0,100,0)(650,0,100,2048)(0,0,100,0)(650,0,100,2048)
pfxtone = |t(350,440,30000,3072)
patchup = rpt/callproceeding
patchdown = rpt/callterminated
 
; As far as what the numbers mean,
; (000,000,010,000)
;   |   |   |   |-------amplitude
;   |   |   |-------------duration
;   |   |-------------------Tone 2
;   |-------------------------Tone 1
 
; So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude.
; Use it for a delay.  Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter)
; The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048.
 
; Morse code parameters, these are common to all repeaters.
 
[morse]
speed = 20 ; Approximate speed in WPM
frequency = 800 ; Morse Telemetry Frequency
amplitude = 4096 ; Morse Telemetry Amplitude
idfrequency = 1065 ; Morse ID Frequency
idamplitude = 1024 ; Morse ID Amplitude
 
;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;
 
[wait-times]                                                                                                 
telemwait = 2000                        ; Time to wait before sending most telemetry
idwait = 500                            ; Time to wait before starting ID
unkeywait = 2000                        ; Time to wait after unkey before sending CT's and link telemetry
calltermwait = 2000                     ; Time to wait before announcing "call terminated"
 
;
; This is where you define your nodes which cam be connected to.
;
 
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your local nodes, and private (off of allstar link) nodes here.
 
294130 = radio@....0.1:4569/294130,NONE ; This must be changed to your node number
1441 = radio@....0.1:4569/1441,NONE           ; and iax port number if not the default
; Memories for remote bases
 
[memory]
;00 = 146.580,100.0,m
;01 = 147.030,103.5,m+t
;02 = 147.240,103.5,m+t
;03 = 147.765,79.7,m-t
;04 = 146.460,100.0,m
;05 = 146.550,100.0,m
 
; Place command macros here
 
[macro]
;1 = *32011#
;2 = *12001*12011*12043*12040*12050*12060*12009*12002*12003*12004*1113*12030#
;3 = *32001*32011*32050*32030*32060#
 
 
; Data Acquisition configuration
 
;[daq-list]
;device = device_name1
;device = device_name2
 
;Where: device_name1 and device_name2 are stanzas you define in this file
 
;device = daq-cham-1
 
; Device name
 
;[daq-cham-1] ; Defined in [daq-list]
;hwtype = uchameleon ; DAQ hardware type
;devnode = /dev/ttyUSB0 ; DAQ device node (if required)
;1 = inadc ; Pin definition for an ADC channel
;2 = inadc
;3 = inadc
;4 = inadc
;5 = inadc
;6 = inadc
;7 = inadc
;8 = inadc
;9 = inp ; Pin definition for an input with a weak pullup resistor
;10 = inp
;11 = inp
;12 = inp
;13 = in ; Pin definition for an input without a weak pullup resistor
;14 = out ; Pin definition for an output
;15 = out
;16 = out
;17 = out
;18 = out
 
;[meter-faces]
 
;face = scale(scalepre,scalediv,scalepost),word/?,...
;
; scalepre = offset to add before dividing with scalediv
; scalediv = full scale/number of whole units (e.g. 256/20 or 12.8 for 20 volts).
; scalepost = offset to add after dividing with scalediv
;
;face = range(X-Y:word,X2-Y2:word,...),word/?,...
;face = bit(low-word,high-word),word/?,...
;
; word/? is either a word in /var/lib/asterisk/sounds or one of its subdirectories,
; or a question mark which is  a placeholder for the measured value.
;
;
; Battery voltage 0-20 volts
;batvolts = scale(0,12.8,0),rpt/thevoltageis,?,ha/volts
; 4 quadrant wind direction
;winddir = range(0-33:north,34-96:west,97-160:south,161-224:east,225-255:north),rpt/thewindis,?
; LM34 temperature sensor with 130 deg. F full scale
;lm34f = scale(0,1.969,0),rpt/thetemperatureis,?,degrees,fahrenheit
; Status poll (non alarmed)
;light = bit(ha/off,ha/on),ha/light,?
 
;[alarms]
;
;tag = device,pin,node,ignorefirst,func-low,func-hi
;
;tag = a unique name for the alarm
;device = daq device to poll
;pin = the device pin to be monitored
;ignorefirstalarm = set to 1 to throwaway first alarm event, or 0 to report it
;node = the node number to execute the function on
;func-low = the DTMF function to execute on a high to low transition
;func-high = the DTMF function to execute on a low to high transition
;
; a  '-' as a function name is shorthand for no-operation
;
;door = daq-cham-1,9,1,2017,*7,-
;pwrfail = daq-cham-1,10,0,2017,*911111,-
;
; Control states
; Allow several control operator functions to be changed at once using one command (good for scheduling)
;
;[controlstates]                                                          
;statenum = copcmd,[copcmd]...                                                  
;0 = rptena,lnkena,apena,totena,ufena,noicd  ; Normal operation                                  
;1 = rptena,lnkena,apdis,totdis,ufena,noice  ; Net and news operation                                             
;2 = rptena,lnkdis,apdis,totena,ufdis,noice  ; Repeater only operation
 
; Scheduler - execute a macro at a given time
 
[schedule]                                                                      
;dtmf_function =  m h dom mon dow  ; ala cron, star is implied                                                  
;2 = 00 00 * * *   ; at midnight, execute macro 2.       
 
#includeifexists custom/rpt.conf
 
       
 


Charles Holliday
 

Can we see your configuration files to see if everything matches up?

- KG5IRU 


Tito Lopez - YN1OB
 

For the Life Of me I cant get ASL traffic to DMR. 
I am able to bridge YSF to DMR  but dog on ASl traffic will not pass to From DMR <--ASL.
Yes I have followed the instruction on the ASL-DMR found in this forum to no luck.
I anyone willing to put in their two cents?

YN1OB
W3DAW