Hello Everyone,

I just received the Ok from BM for my OB connection to BM. Did my best to configure hblink.cfg and rules.py. I'm using TG7 TS2 on my hotspot to link to HBlink. HBlink should send it to BM on TG110618 TS1. We have a PaPa DMR repeater close by. If I key up 110618. I see it on BM last heard. If I key up TG7 on my hotspot. HBlink dashboard shows it going out to BM. But not seen on BM last heard.

Thanks for your help, David KE6UPI

PS: Hotspots are using DMRGateway to send TG2 and TG7 to HBlink.

Here is what BM sent me to setup OB.

ID:            310709450
PW:          passw0rd blacked out
Master:    3103.repeater.net
Port:         UDP 62035 (make sure UDP Port is open and working. )
TGs:          110618
Timeslot:  1 (traffic will be sent on Timeslot 1)

hblink.cfg

[BM-3103]

MODE: OPENBRIDGE

ENABLED: True

IP:

PORT: 62035

NETWORK_ID: 310709450

PASSPHRASE: passw0rd blacked out

TARGET_IP: 74.91.118.251

TARGET_PORT: 62035

USE_ACL: True

SUB_ACL: DENY:1

 

TGID_ACL: PERMIT:ALL

rules.py

'Local 7': [

            {'SYSTEM': 'LAX-HBlink',          'TS': 2, 'TGID': 7,        'ACTIVE': True,  'TIMEOUT': 0, 'TO_TYPE':'NONE',  'ON': [],       'OFF': [],    'RESET': []},

 

            {'SYSTEM': 'BM-3103',             'TS': 1, 'TGID': 110618,   'ACTIVE': True,  'TIMEOUT': 0, 'TO_TYPE':'NONE',  'ON': [],       'OFF': [],    'RESET': []},

I went back and re-entered the PASSPHRASE. 

I went back and re-entered the PASSPHRASE. 

INFO 2021-04-06 12:58:56,428 (LAX-HBlink) *CALL START* STREAM ID: 50010397 SUB: 1106273 (1106273) PEER: 310709411 (310709411) TGID 7 (7), TS 2

INFO 2021-04-06 12:58:56,429 (LAX-HBlink) Conference Bridge: Local 7, Call Bridged to OBP System: BM-3103 TS: 1, TGID: 110618

INFO 2021-04-06 12:58:58,353 (LAX-HBlink) *CALL END*   STREAM ID: 50010397 SUB: 1106273 (1106273) PEER: 310709411 (310709411) TGID 7 (7), TS 2, Duration: 1.92

INFO 2021-04-06 12:59:06,443 (BM-3103) *TIME OUT*   STREAM ID: 50010397 SUB: 1106273 PEER: 310709450 TGID: 7 TS 1 Duration: 1.92

Any help would be great.

David 
KE6UPI

-- 
/**************************************************
* Amateur Radio Station AC0HY                     *
* W. Paul Mills         SN807                     *
* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
* President Kaw Valley Amateur Radio Club         *
**************************************************/

Thanks Paul,

I did a fresh OS install and HBlink install. I used "https://github.com/HBLink-org/hblink3" verison for HBlink.

I asked for a new BM password. I used a text to speech to double check O's and 0. Still doesn't work. BM support states password mismatch. "Apr 9 03:33:56 bm3103 Master 3103[15877]: OpenBridge connection 310709450 has password mismatch"

Thanks, David
KE6UPI

*** Resolved

Had BM check Password, ID and IP Address.

David