Promise this is the last question i'll ask just one more thing - BM looping #hblink


Aaron Groover
 

Ok, 

So far everything seems to be working on the TGIF side with no errors. However with BM i get loops. I have changed the selfcare password as thats been a thing for a while now and it still loops. It logs in but gives me this. I just wan to make sure this is the normal log file for BM. If not would someone guide me in the right direction if they do not mind? I would greatly appreciate it. Thanks to N4IRS for a great system. Great work sir!


INFO 2022-01-30 15:42:24,513 (BM) Repeater Configuration Sent
INFO 2022-01-30 15:42:24,548 (BM) Repeater Configuration Accepted
INFO 2022-01-30 15:42:24,548 (BM) Sent options: (b'Type=HBlink;')
INFO 2022-01-30 15:42:29,442 (BM) Sending login request to master 162.248.88.117:62031
INFO 2022-01-30 15:42:29,477 (BM) Repeater Login ACK Received with 32bit ID: 3015099604
INFO 2022-01-30 15:42:29,509 (BM) Repeater Authentication Accepted
INFO 2022-01-30 15:42:29,510 (BM) Repeater Configuration Sent
INFO 2022-01-30 15:42:29,551 (BM) Repeater Configuration Accepted
INFO 2022-01-30 15:42:29,551 (BM) Sent options: (b'Type=HBlink;')
INFO 2022-01-30 15:42:34,442 (BM) Sending login request to master 162.248.88.117:62031
INFO 2022-01-30 15:42:34,477 (BM) Repeater Login ACK Received with 32bit ID: 3015099604
INFO 2022-01-30 15:42:34,512 (BM) Repeater Authentication Accepted
INFO 2022-01-30 15:42:34,512 (BM) Repeater Configuration Sent
INFO 2022-01-30 15:42:34,548 (BM) Repeater Configuration Accepted
INFO 2022-01-30 15:42:34,548 (BM) Sent options: (b'Type=HBlink;')
INFO 2022-01-30 15:42:39,438 (BM) Sending login request to master 162.248.88.117:62031
INFO 2022-01-30 15:42:39,471 (BM) Repeater Login ACK Received with 32bit ID: 130003536
INFO 2022-01-30 15:42:39,503 (BM) Repeater Authentication Accepted
INFO 2022-01-30 15:42:39,503 (BM) Repeater Configuration Sent
INFO 2022-01-30 15:42:39,538 (BM) Repeater Configuration Accepted
INFO 2022-01-30 15:42:39,538 (BM) Sent options: (b'Type=HBlink;')
 


Randy AA6RH
 

Short answer; the looping is happening because BM doesn't want HBLink signing in as a peer.

Longer answer: https://dvswitch.groups.io/g/HBlink/wiki/23870#What27s-the-best-way-to-connect-HBLink-to-BrandMeister3F

--R
--
Randy Hall AA6RH (not K7AGE, quit asking) 😁


Aaron Groover
 

Thanks Randy!

I’ll put a ticket in for a open bridge. It really is the best way to connect IMO. Just easier on servers and the load. 

Thank you for your help sir!


*tips hat*



Aaron Groover
 

Randy since your amazing at your help. I just wondered if hblink supports ysf as a peer. If so how would it be set up. All other services im ok with. Just fusion seems to boggle me a bit. 


GB7NR Support
 

It does but you will need to install an additional tool from the MMDVM_CM repo, YSF2DMR and add it as a peer via a DMR connection to a master. HBLink is a DMR master server only. Use the connection to bridge to your desired talkgroup and your good to go. You can either install and compile YSF2DMR on the local server or remote. Be sure to set up your ports, IP’s and forwarding as nessassary. Compile your code using make, make install. 

Shane 
M0VUB 

On 1 Feb 2022, at 11:51, Aaron Groover <k3alg@...> wrote:

Randy since your amazing at your help. I just wondered if hblink supports ysf as a peer. If so how would it be set up. All other services im ok with. Just fusion seems to boggle me a bit.