Topics

Help with MMDVM_Bridge install

Steaven Rogers
 

Need a little help....  Following the setup for the bridge using these instructions. https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit

In the MMDVM_Bridge.ini under the [General] stanza I placed my call and my DMR id plus an ssid of 01. Under [DMR] Enable=0 was changed to Enable=1. Under [DMR_Network] I am using 3108.repeater.net.
Upon running the command
./MMDVM_Bridge MMDVM_Bridge.ini I am not getting the excepted output...see below. Also attached is the MMDVM_Bridge.ini. I am also not showing and entry on the selfcare page under Hotspots. Can anyone walk me through this? Thanks, Steve W4YI

*** Output from
./MMDVM_Bridge MMDVM_Bridge.ini ***
I: 2019-06-08 17:22:19.091 MMDVM_Bridge:
I: 2019-06-08 17:22:19.091 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-06-08 17:22:19.091 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-06-08 17:22:19.091 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-06-08 17:22:19.091 This software is for use on amateur radio networks only,
I: 2019-06-08 17:22:19.091 it is to be used for educational purposes only. Its use on
I: 2019-06-08 17:22:19.091 commercial networks is strictly prohibited.
I: 2019-06-08 17:22:19.091 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-06-08 17:22:19.091 MMDVM_Bridge-20180423 is starting
M: 2019-06-08 17:22:19.091 Built 19:26:19 Jul 26 2018 (GitID #903ae69)
I: 2019-06-08 17:22:19.091 General Parameters
I: 2019-06-08 17:22:19.091 Callsign: W4YI
I: 2019-06-08 17:22:19.091 Id: 314790101
I: 2019-06-08 17:22:19.092 Duplex: no
I: 2019-06-08 17:22:19.092 Timeout: 180s
I: 2019-06-08 17:22:19.092 D-Star: disabled
I: 2019-06-08 17:22:19.092 DMR: enabled
I: 2019-06-08 17:22:19.092 YSF: disabled
I: 2019-06-08 17:22:19.092 P25: disabled
I: 2019-06-08 17:22:19.092 NXDN: disabled
I: 2019-06-08 17:22:19.092 Modem Parameters
I: 2019-06-08 17:22:19.092 Port: /dev/null
I: 2019-06-08 17:22:19.092 RX Invert: no
I: 2019-06-08 17:22:19.092 TX Invert: no
I: 2019-06-08 17:22:19.092 PTT Invert: no
I: 2019-06-08 17:22:19.092 TX Delay: 100ms
I: 2019-06-08 17:22:19.092 RX Offset: 0Hz
I: 2019-06-08 17:22:19.092 TX Offset: 0Hz
I: 2019-06-08 17:22:19.092 RX DC Offset: 0
I: 2019-06-08 17:22:19.092 TX DC Offset: 0
I: 2019-06-08 17:22:19.092 RF Level: 100.0%
I: 2019-06-08 17:22:19.092 DMR Delay: 0 (0.0ms)
I: 2019-06-08 17:22:19.092 RX Level: 50.0%
I: 2019-06-08 17:22:19.092 CW Id TX Level: 50.0%
I: 2019-06-08 17:22:19.093 D-Star TX Level: 50.0%
I: 2019-06-08 17:22:19.093 DMR TX Level: 50.0%
I: 2019-06-08 17:22:19.093 YSF TX Level: 50.0%
I: 2019-06-08 17:22:19.093 P25 TX Level: 50.0%
I: 2019-06-08 17:22:19.093 NXDN TX Level: 50.0%
I: 2019-06-08 17:22:19.093 RX Frequency: 222340000Hz (222340000Hz)
I: 2019-06-08 17:22:19.093 TX Frequency: 224940000Hz (224940000Hz)
M: 2019-06-08 17:22:19.093 Opening the MMDVM
I: 2019-06-08 17:22:19.093 Display Parameters
I: 2019-06-08 17:22:19.093 Type:
I: 2019-06-08 17:22:19.093 RSSI
I: 2019-06-08 17:22:19.093 Mapping File: RSSI.dat
W: 2019-06-08 17:22:19.093 Cannot open the RSSI data file - RSSI.dat
I: 2019-06-08 17:22:19.093 DMR Id Lookups
I: 2019-06-08 17:22:19.093 File: /var/lib/mmdvm/DMRIds.dat
I: 2019-06-08 17:22:19.093 Reload: 24 hours
I: 2019-06-08 17:22:19.814 Loaded 135519 Ids to the DMR callsign lookup table
I: 2019-06-08 17:22:19.814 DMR RF Parameters
I: 2019-06-08 17:22:19.814 Started the DMR Id lookup reload thread
I: 2019-06-08 17:22:19.819 Id: 314790101
I: 2019-06-08 17:22:19.819 Color Code: 1
I: 2019-06-08 17:22:19.819 Self Only: no
I: 2019-06-08 17:22:19.819 Embedded LC Only: yes
I: 2019-06-08 17:22:19.819 Dump Talker Alias Data: no
I: 2019-06-08 17:22:19.819 Prefixes: 0
I: 2019-06-08 17:22:19.819 Call Hang: 4s
I: 2019-06-08 17:22:19.819 TX Hang: 4s
I: 2019-06-08 17:22:19.819 Mode Hang: 10s
M: 2019-06-08 17:22:19.819 DMR, Opening INI file: DVSwitch.ini
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] TXPort -> 31100
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] RXPort -> 31103
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Slot -> 2
M: 2019-06-08 17:22:19.820 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
M: 2019-06-08 17:22:19.820 MMDVM_Bridge-20180423 is running
*** End ***

*** MMDVM_Bridge.ini ***
[General]
Callsign=W4YI
Id=314790101
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=3108.repeater.netPort=62031
Jitter=750
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

[P25 Network]
Enable=0GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

*** End ***



Steve N4IRS
 

Enable DMR Networking

Sent via smoke signal (AT&T)


From: allstarlink@DVSwitch.groups.io <allstarlink@DVSwitch.groups.io> on behalf of Steaven Rogers <srogers@...>
Sent: Saturday, June 8, 2019 1:29:12 PM
To: allstarlink@DVSwitch.groups.io
Subject: [allstarlink] Help with MMDVM_Bridge install
 
Need a little help....  Following the setup for the bridge using these instructions. https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit

In the MMDVM_Bridge.ini under the [General] stanza I placed my call and my DMR id plus an ssid of 01. Under [DMR] Enable=0 was changed to Enable=1. Under [DMR_Network] I am using 3108.repeater.net.
Upon running the command
./MMDVM_Bridge MMDVM_Bridge.ini I am not getting the excepted output...see below. Also attached is the MMDVM_Bridge.ini. I am also not showing and entry on the selfcare page under Hotspots. Can anyone walk me through this? Thanks, Steve W4YI

*** Output from
./MMDVM_Bridge MMDVM_Bridge.ini ***
I: 2019-06-08 17:22:19.091 MMDVM_Bridge:
I: 2019-06-08 17:22:19.091 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-06-08 17:22:19.091 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-06-08 17:22:19.091 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-06-08 17:22:19.091 This software is for use on amateur radio networks only,
I: 2019-06-08 17:22:19.091 it is to be used for educational purposes only. Its use on
I: 2019-06-08 17:22:19.091 commercial networks is strictly prohibited.
I: 2019-06-08 17:22:19.091 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-06-08 17:22:19.091 MMDVM_Bridge-20180423 is starting
M: 2019-06-08 17:22:19.091 Built 19:26:19 Jul 26 2018 (GitID #903ae69)
I: 2019-06-08 17:22:19.091 General Parameters
I: 2019-06-08 17:22:19.091 Callsign: W4YI
I: 2019-06-08 17:22:19.091 Id: 314790101
I: 2019-06-08 17:22:19.092 Duplex: no
I: 2019-06-08 17:22:19.092 Timeout: 180s
I: 2019-06-08 17:22:19.092 D-Star: disabled
I: 2019-06-08 17:22:19.092 DMR: enabled
I: 2019-06-08 17:22:19.092 YSF: disabled
I: 2019-06-08 17:22:19.092 P25: disabled
I: 2019-06-08 17:22:19.092 NXDN: disabled
I: 2019-06-08 17:22:19.092 Modem Parameters
I: 2019-06-08 17:22:19.092 Port: /dev/null
I: 2019-06-08 17:22:19.092 RX Invert: no
I: 2019-06-08 17:22:19.092 TX Invert: no
I: 2019-06-08 17:22:19.092 PTT Invert: no
I: 2019-06-08 17:22:19.092 TX Delay: 100ms
I: 2019-06-08 17:22:19.092 RX Offset: 0Hz
I: 2019-06-08 17:22:19.092 TX Offset: 0Hz
I: 2019-06-08 17:22:19.092 RX DC Offset: 0
I: 2019-06-08 17:22:19.092 TX DC Offset: 0
I: 2019-06-08 17:22:19.092 RF Level: 100.0%
I: 2019-06-08 17:22:19.092 DMR Delay: 0 (0.0ms)
I: 2019-06-08 17:22:19.092 RX Level: 50.0%
I: 2019-06-08 17:22:19.092 CW Id TX Level: 50.0%
I: 2019-06-08 17:22:19.093 D-Star TX Level: 50.0%
I: 2019-06-08 17:22:19.093 DMR TX Level: 50.0%
I: 2019-06-08 17:22:19.093 YSF TX Level: 50.0%
I: 2019-06-08 17:22:19.093 P25 TX Level: 50.0%
I: 2019-06-08 17:22:19.093 NXDN TX Level: 50.0%
I: 2019-06-08 17:22:19.093 RX Frequency: 222340000Hz (222340000Hz)
I: 2019-06-08 17:22:19.093 TX Frequency: 224940000Hz (224940000Hz)
M: 2019-06-08 17:22:19.093 Opening the MMDVM
I: 2019-06-08 17:22:19.093 Display Parameters
I: 2019-06-08 17:22:19.093 Type:
I: 2019-06-08 17:22:19.093 RSSI
I: 2019-06-08 17:22:19.093 Mapping File: RSSI.dat
W: 2019-06-08 17:22:19.093 Cannot open the RSSI data file - RSSI.dat
I: 2019-06-08 17:22:19.093 DMR Id Lookups
I: 2019-06-08 17:22:19.093 File: /var/lib/mmdvm/DMRIds.dat
I: 2019-06-08 17:22:19.093 Reload: 24 hours
I: 2019-06-08 17:22:19.814 Loaded 135519 Ids to the DMR callsign lookup table
I: 2019-06-08 17:22:19.814 DMR RF Parameters
I: 2019-06-08 17:22:19.814 Started the DMR Id lookup reload thread
I: 2019-06-08 17:22:19.819 Id: 314790101
I: 2019-06-08 17:22:19.819 Color Code: 1
I: 2019-06-08 17:22:19.819 Self Only: no
I: 2019-06-08 17:22:19.819 Embedded LC Only: yes
I: 2019-06-08 17:22:19.819 Dump Talker Alias Data: no
I: 2019-06-08 17:22:19.819 Prefixes: 0
I: 2019-06-08 17:22:19.819 Call Hang: 4s
I: 2019-06-08 17:22:19.819 TX Hang: 4s
I: 2019-06-08 17:22:19.819 Mode Hang: 10s
M: 2019-06-08 17:22:19.819 DMR, Opening INI file: DVSwitch.ini
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] TXPort -> 31100
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] RXPort -> 31103
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Slot -> 2
M: 2019-06-08 17:22:19.820 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
M: 2019-06-08 17:22:19.820 MMDVM_Bridge-20180423 is running
*** End ***

*** MMDVM_Bridge.ini ***
[General]
Callsign=W4YI
Id=314790101
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=3108.repeater.netPort=62031
Jitter=750
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

[P25 Network]
Enable=0GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

*** End ***



Steve N4IRS
 

DMR Network]

Enable=1

Sent via smoke signal (AT&T)


From: allstarlink@DVSwitch.groups.io <allstarlink@DVSwitch.groups.io> on behalf of Steaven Rogers <srogers@...>
Sent: Saturday, June 8, 2019 1:29:12 PM
To: allstarlink@DVSwitch.groups.io
Subject: [allstarlink] Help with MMDVM_Bridge install
 
Need a little help....  Following the setup for the bridge using these instructions. https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit

In the MMDVM_Bridge.ini under the [General] stanza I placed my call and my DMR id plus an ssid of 01. Under [DMR] Enable=0 was changed to Enable=1. Under [DMR_Network] I am using 3108.repeater.net.
Upon running the command
./MMDVM_Bridge MMDVM_Bridge.ini I am not getting the excepted output...see below. Also attached is the MMDVM_Bridge.ini. I am also not showing and entry on the selfcare page under Hotspots. Can anyone walk me through this? Thanks, Steve W4YI

*** Output from
./MMDVM_Bridge MMDVM_Bridge.ini ***
I: 2019-06-08 17:22:19.091 MMDVM_Bridge:
I: 2019-06-08 17:22:19.091 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-06-08 17:22:19.091 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-06-08 17:22:19.091 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-06-08 17:22:19.091 This software is for use on amateur radio networks only,
I: 2019-06-08 17:22:19.091 it is to be used for educational purposes only. Its use on
I: 2019-06-08 17:22:19.091 commercial networks is strictly prohibited.
I: 2019-06-08 17:22:19.091 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-06-08 17:22:19.091 MMDVM_Bridge-20180423 is starting
M: 2019-06-08 17:22:19.091 Built 19:26:19 Jul 26 2018 (GitID #903ae69)
I: 2019-06-08 17:22:19.091 General Parameters
I: 2019-06-08 17:22:19.091 Callsign: W4YI
I: 2019-06-08 17:22:19.091 Id: 314790101
I: 2019-06-08 17:22:19.092 Duplex: no
I: 2019-06-08 17:22:19.092 Timeout: 180s
I: 2019-06-08 17:22:19.092 D-Star: disabled
I: 2019-06-08 17:22:19.092 DMR: enabled
I: 2019-06-08 17:22:19.092 YSF: disabled
I: 2019-06-08 17:22:19.092 P25: disabled
I: 2019-06-08 17:22:19.092 NXDN: disabled
I: 2019-06-08 17:22:19.092 Modem Parameters
I: 2019-06-08 17:22:19.092 Port: /dev/null
I: 2019-06-08 17:22:19.092 RX Invert: no
I: 2019-06-08 17:22:19.092 TX Invert: no
I: 2019-06-08 17:22:19.092 PTT Invert: no
I: 2019-06-08 17:22:19.092 TX Delay: 100ms
I: 2019-06-08 17:22:19.092 RX Offset: 0Hz
I: 2019-06-08 17:22:19.092 TX Offset: 0Hz
I: 2019-06-08 17:22:19.092 RX DC Offset: 0
I: 2019-06-08 17:22:19.092 TX DC Offset: 0
I: 2019-06-08 17:22:19.092 RF Level: 100.0%
I: 2019-06-08 17:22:19.092 DMR Delay: 0 (0.0ms)
I: 2019-06-08 17:22:19.092 RX Level: 50.0%
I: 2019-06-08 17:22:19.092 CW Id TX Level: 50.0%
I: 2019-06-08 17:22:19.093 D-Star TX Level: 50.0%
I: 2019-06-08 17:22:19.093 DMR TX Level: 50.0%
I: 2019-06-08 17:22:19.093 YSF TX Level: 50.0%
I: 2019-06-08 17:22:19.093 P25 TX Level: 50.0%
I: 2019-06-08 17:22:19.093 NXDN TX Level: 50.0%
I: 2019-06-08 17:22:19.093 RX Frequency: 222340000Hz (222340000Hz)
I: 2019-06-08 17:22:19.093 TX Frequency: 224940000Hz (224940000Hz)
M: 2019-06-08 17:22:19.093 Opening the MMDVM
I: 2019-06-08 17:22:19.093 Display Parameters
I: 2019-06-08 17:22:19.093 Type:
I: 2019-06-08 17:22:19.093 RSSI
I: 2019-06-08 17:22:19.093 Mapping File: RSSI.dat
W: 2019-06-08 17:22:19.093 Cannot open the RSSI data file - RSSI.dat
I: 2019-06-08 17:22:19.093 DMR Id Lookups
I: 2019-06-08 17:22:19.093 File: /var/lib/mmdvm/DMRIds.dat
I: 2019-06-08 17:22:19.093 Reload: 24 hours
I: 2019-06-08 17:22:19.814 Loaded 135519 Ids to the DMR callsign lookup table
I: 2019-06-08 17:22:19.814 DMR RF Parameters
I: 2019-06-08 17:22:19.814 Started the DMR Id lookup reload thread
I: 2019-06-08 17:22:19.819 Id: 314790101
I: 2019-06-08 17:22:19.819 Color Code: 1
I: 2019-06-08 17:22:19.819 Self Only: no
I: 2019-06-08 17:22:19.819 Embedded LC Only: yes
I: 2019-06-08 17:22:19.819 Dump Talker Alias Data: no
I: 2019-06-08 17:22:19.819 Prefixes: 0
I: 2019-06-08 17:22:19.819 Call Hang: 4s
I: 2019-06-08 17:22:19.819 TX Hang: 4s
I: 2019-06-08 17:22:19.819 Mode Hang: 10s
M: 2019-06-08 17:22:19.819 DMR, Opening INI file: DVSwitch.ini
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] TXPort -> 31100
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] RXPort -> 31103
M: 2019-06-08 17:22:19.819 DMR, Setting [DMR] Slot -> 2
M: 2019-06-08 17:22:19.820 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
M: 2019-06-08 17:22:19.820 MMDVM_Bridge-20180423 is running
*** End ***

*** MMDVM_Bridge.ini ***
[General]
Callsign=W4YI
Id=314790101
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=0
Module=C

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=3108.repeater.netPort=62031
Jitter=750
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

[P25 Network]
Enable=0GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

*** End ***



Steaven Rogers
 

When I first read your reply I thought to myself "I have enable=1".  But after closer inspection I see where the mistake was in not placing that under the correct stanza.  It's hell getting old...Need to let my teenager do this.  Lol

Thanks
Steve

K4VL
 

Your not getting old. You just needed to enable DMR and DMR Network. You just missed one.

Virus-free. www.avg.com


On Sat, Jun 8, 2019 at 12:43 PM Steaven Rogers <srogers@...> wrote:
When I first read your reply I thought to myself "I have enable=1".  But after closer inspection I see where the mistake was in not placing that under the correct stanza.  It's hell getting old...Need to let my teenager do this.  Lol

Thanks
Steve