Re: DMR Volume low


Brad N8PC
 

usrpAudio = AUDIO_UNITY
tlvAudio = AUDIO_UNITY

adjust usrpGain < Controls Audio from Allstar
       tlvAudio < Controls Audio from DMR

change those 2 from AUDIO_UNITY to AUDIO_USE_GAIN
then adjust accordingly for the volume you want

On 11/25/2021 5:07 PM, Steve N4IRS wrote:
This entries have changed, though the function is the same.
[USRP]
address = 127.0.0.1                     ; IP address of USRP partner (Allstar/Asterisk or another Analog_Bridge)
txPort = 31001                          ; Transmit USRP frames on this port
rxPort = 31001                          ; Listen for USRP frames on this port
usrpAudio = AUDIO_UNITY                 ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC)
usrpGain = 1.10                         ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
usrpAGC = -20,10,100                    ; Set the agc threshold (db), slope (db) and decay (ms)
tlvAudio = AUDIO_UNITY                  ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.35                          ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)

On 11/25/21 4:18 PM, Brad N8PC wrote:

Join main@DVSwitch.groups.io to automatically receive all group messages.