; IAX_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the IAX_Bridge command line.
[IAX]
; IAX Bridge configuration section
call = N0CALL
; Node callsign (exported with metadata)
node = 123456
; This nodes number
regServerAddress = register.allstarlink.org ; URL of the
registration server or empty if not wanted
password = 101010
; ASL node password
startNode = 0
; Initial node number to tune to
usrpAddress = 127.0.0.1 ;
Address of the USRP listener (typically AB or AR)
rXPort = 32001
; Port to listen on (import)
tXPort = 34001
; Port to send USRP frames to (export)
iaxPort = 4569 ; port
number to listen for IAX connects
statsEnabled = 1 ; Report
stats to AllstarLink.org
keyQueryEnabled = 1 ; Issue key
query (K?) requests to see who is transmitting
timeoutSeconds = 180 ;
Transmission timeout (both directions)
logLevel = 3 ;
IAXB log level (1=debug, 5=Errors only)
displayLevel = 1 ; Log
level for console output
logFilePath = /var/log/dvswitch/IAX_Bridge.log
; Where to place the log file
[nodes]
; Note, if you are using automatic update for allstar link
nodes,
; no allstar link nodes should be defined here. Only place a
definition
; for your local nodes, and private (off of allstar link)
nodes here.
[MACROS]
; Where the macros are
; xxxx=yyyy
; xxxx is the dial string to match
; yyyy is the command line to execute
; xxxx must be preceded by a *
; xxxx can be any string (alphanumeric)
; yyyy is the command to execute
; yyyy will replace xxxx in the dial string
; arguments follow the macro name with a # delimiter
OnConnect=osascript -e 'display notification "Connected to
$@" with title "IAX_Bridge"';say "Connected to $@"
OnDisconnect=osascript -e 'display notification
"Disconnected" with title "IAX_Bridge"'
OnTelemetry=osascript -e 'display notification "Telemetry:
$@" with title "IAX_Bridge"'
hello=osascript -e 'display notification "hello"'
