Lito,
MMDVM_Bridge it a Partner program capable of supporting all of
the modes used in the various MMDVM networks.
This is a section of MMDVM.ini
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35103 ; Port to send
AMBE TLV frames to (export)
RXPort = 35100 ; Port to
listen on (import)
Slot = 1 ; Export slot
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 35100 ; Port to send AMBE TLV frames
to (export)
RXPort = 35103 ; Port to listen on (import)
FallbackID = 3113042 ; In case we can not find a
valid DMR id in the database, export this one
ExportTG = 3166 ; Which TG to export
Slot = 1 ; Export slot
Each stanza contains the information unique to importing and
exporting data to another Partner (stanza)
You point a TXPort of one mode at the RXPort of the mode you
want to connect to. I have bolded the changes.
The DMR TXPort now points to the YSF RXPort (35103)
The YSF TXPort now points to the DMRRXPort (35100)
Think crossover cable.
Input to output, RX to TX
output to input, TX to RX
Now we need to enable and configure the 2 modes you want to use.
Use the MMDVM_Bridge to enable and configure the modes just like
you would in MMDVM.ini
In the case of YSFn <-> DMR your life is easier since
neither mode needs a gateway to communicate.
Point the YSF mode in MMDVM_Bridge.ini at your YSF reflector
Point the DMR mode in MMDVM_Bridge.ini at BM.
Hope this helps,
73, Steve N4IRS
On 05/07/2018 04:44 PM, Roselito
de los Reyes wrote:
Hello,
How do I bridge my YSF reflector with a BM talkgroup?
73,
Lito WI6Y
