toggle quoted messageShow quoted text
I have the self care account now and i set the talk group static.
Transmissions are not heard going from DMR to AllStar it's like it keys up on the Allstar for a spit second then drops.
That was it!
Right after i connected I heard Allstar on the DMR TG.
I can transmit from AllStar to DMR as well. However, I cannot Transmit from DMR to AllStar. Is that where I'm still waiting on the Selfcare account for the Static Talk Group?
New logs attached.
On Thu, May 17, 2018 at 9:48 PM Steve N4IRS <szingman@...
You need to enable the usrp channel driver in modules.conf.
On 05/17/2018 10:46 PM, Russell Thomas,
it's doing this again (screenshot attached)
it because i rebooted?
this the DAHDI again?
good catch. I did not. it is now.
On Thu, May 17, 2018 at 9:17 PM Steve N4IRS
Did you comment out
the psuedo channel driver?
05/17/2018 10:13 PM, Russell Thomas, KV4S wrote:
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU
Radio interface USRP
However, I have not setup the selfcare account
for the club. I'll work on that and report back.
On Thu, May 17, 2018 at 8:57 PM Steve
setup the usrp channel driver and pointed it at
Have you setup the selfcare account for the DMR
connection and created a static TG?
05/17/2018 09:46 PM, Russell Thomas, KV4S
hmm can anyone check these logs
and see if they can tell what's wrong?
On Thu, May 17, 2018 at 6:17
PM Steve N4IRS <szingman@...
systemctl start analog_bridge
systemctl start mmdvm_bridge
logs are at /var/log/mmdvm
05/17/2018 07:12 PM, Russell Thomas,
I believe I was able to
make the appropriate edits to the
ini files in opt.
How do you start the DVSwitch?
How do you view the logs I've
seen folks post here?
On Wed, May 16, 2018
at 11:19 AM Steve N4IRS <szingman@...
DVSwitch programs are installed
5/16/2018 12:16 PM, Russell
Thomas, KV4S wrote:
Ok, I started
over from scratch with AWS.
I think i was loading the
wrong images previously I
loaded the Ubuntu 16.04 and
that was the key.
I installed the ASL and
All appears to have
installed correctly this
What are my next steps.
I tried some searches but
I can't find where the
.ini files are located.