toggle quoted messageShow quoted text
Tuesday, 22MAY - My new Allstar/DMR Gateway up and running.
Allstar to DMR works fine...
Strangely, DMR back to Allstar...(a motorboat?) sound is heard on the Analog Allstar Radio - when transmitting back from a DMR/BM Talk Group...
Hint's on what needs to be adjusted?
Below from the rpt.conf (courtesy tone section) how does below compare to yours?
Thanks - N0ECT
unlinkedct = ct2 ; Send a this courtesy tone when the user unkeys if the node is not connected to any other nodes. (optional, default is none)
remotect = ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
linkunkeyct = ct8 ; sent when a transmission received over the link unkeys
;nolocallinkct = 0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
On Monday, May 21, 2018 9:36 AM, "Russell Thomas, KV4S" <russelljthomas@...> wrote:
I wanted to report as of this morning our club Allstar node and DMR talk group are working great!
I'm not exactly sure what I did to fix it (maybe Steve got a chance to remote in?).
After turning off the courtesy tones I had a full convo with someone on DMR while I was on AllStar. Maybe the hang time or tones were blocking/interfering with the DMR side?
Thanks to Steve and everyone that's been helping me the past week or so get the AllStar node and DVSwitch up and going! It's all in the cloud too so even an extra shutout for the AWS support as well!
This group is a great place for ideas and testing. Many thanks all around.
I'll be keeping an eye out and helping where I can I hope I learned something from all this and can pass it along :)
On Fri, May 18, 2018 at 9:34 PM Steve N4IRS <szingman@...
No problem. I will fix the Analog_Bridge install so it installs
md380-emu. it really should have in the first place. I have found a
number of things like that I need to fix. There are also some config
file changes that should help. Thanks for trying things out.
73, Steve N4IRS
On 05/18/2018 10:28 PM, James Nessen
apologies, I installed analog_bridge which had a dependency
of dvswitch-base (which obviously is not the same as
you did a
apt-get install dvswitch, and it did not install md380-emu?
On 05/18/2018 09:54 PM, James Nessen
It did not
and that was the missing component for me that I had to
install by hand.
installed the dvswitch package or Analog_Bridge it should
have installed md380-emu.
On 05/18/2018 06:54 PM, Roselito de los
for all you do. I tried installing DVSwitch on a pi
with ASL. How do I get the MD380-EMU into the install
and get it running like Russel has it setup?
report, it's transcoding from Analog to DMR but not from
DMR to Analog.
case, since you’re running in the cloud, what is doing
the vocoder transcoding?
back home and just gave it a try again. It's not
working from DMR to AllStar.
is a screenshot from DMR hoseline. My audio is
going out over the hoseline network fine but
not on the allstar node.
to DMR comes over fine.
Fri, May 18, 2018 at 10:41 AM Steve N4IRS <szingman@...
looks like it is working to me.
On 5/18/2018 9:12
AM, Russell Thomas, KV4S wrote:
tweaks and no success, attaching logs.
I have the
self care account now and i set the
talk group static.
are not heard going from DMR to
AllStar it's like it keys up on
the Allstar for a spit second then
after i connected I heard
Allstar on the DMR TG.
transmit from AllStar to DMR
as well. However, I cannot
Transmit from DMR to AllStar.
Is that where I'm still
waiting on the Selfcare
account for the Static Talk
Thu, May 17, 2018 at 9:48 PM
Steve N4IRS <szingman@...
need to enable the usrp
channel driver in
05/17/2018 10:46 PM,
Russell Thomas, KV4S
it's doing this again
it because i
this the DAHDI
catch. I did not. it
On Thu, May 17, 2018 at 9:17 PM Steve N4IRS
Did you comment out the
On 05/17/2018 10:13 PM, Russell Thomas, KV4S
i did un-comment this in the rpt.conf:
rxchannel = USRP/127.0.0.1:34001:32001; GNU
However, I have not setup the selfcare account
for the club.
I'll work on
On Thu, May 17, 2018 at 8:57 PM Steve N4IRS
Have you setup the usrp
and pointed it
Have you setup
On 05/17/2018 09:46 PM, Russell Thomas, KV4S
hmm can anyone check these logs and see if they
On Thu, May 17, 2018 at 6:17 PM Steve N4IRS
logs are at
On 05/17/2018 07:12 PM, Russell Thomas, KV4S
I believe I was able to make the appropriate
edits to the
ini files in
How do you start the DVSwitch?
How do you view the logs I've seen folks post
On Wed, May 16, 2018 at 11:19 AM Steve N4IRS
All the DVSwitch programs
On 5/16/2018 12:16 PM, Russell Thomas, KV4S
Ok, I started over from scratch with AWS. I
think i was
and that was
I installed the ASL and the DVSwitch.
All appears to have installed correctly this
What are my next steps. I tried some searches
but I can't
find where the
.ini files are