DMR to ASL audio level
toggle quoted messageShow quoted text
Please make a suggestion as your schedule allows.
Symptom needing help: low volume audio coming back in from DMR side to Allstar side.
My current Analog_Bridge.ini is below. Original entries marked with a # (updated entries right below those lines)
Steve - I made the adjustments based on an earlier email (to the group) from you.
Q.) How best to include the DMR Audio going into the Allstar side.
73s -pete N0ECT
server = 127.0.0.1 ; IP address of Allstar/Asterisk
toASLPort = 32001 ; Analog_Bridge <-- ASL
fromASLPort = 34001 ; Analog_Bridge --> ASL
# aslAudio = AUDIO_UNITY ; Original Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
aslAudio = AUDIO_USE_GAIN ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
# agcGain = -20 ; Original Gain (in db) of the AGC filter
agcGain = .5 ; Gain (in db) of the AGC filter
dmrAudio = AUDIO_UNITY ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 0.65 ; Gain factor of audio from ASL (0.0-1.0)
# dmrGain = 0.35 ; Original Gain factor of audio from ASL (0.0-1.0)
On Sunday, May 20, 2018 7:23 PM, Steve N4IRS <szingman@...> wrote:
I have some updates to make to to the programs, meta packages and config files. We are changing some of the defaults to point to the test reflectors. There are a few minor updates to the programs.
Mike and I have been working on the documentation and example configs. I'll be updating the wiki with some of the samples.
73, Steve N4IRS