Ty - KG5RKI <tydweaver@...>
It's nothing with brandmeister, check the way you handle that first packet I forget what it's called but the one dvmega thought was always the same ended up not being. Basically I resolved that issue I believe by looking mostly at the ""vocoding areas" iirc it's been a long time.
On Fri, Jun 8, 2018, 10:35 AM Steve N4IRS < szingman@...> wrote:
Easier to change on the bridge.
On 6/8/2018 11:34 AM, WillieB wrote:
Right.
I
have another ID I can test with. Would it make more sense to
put the other ID on the bridge or the hotspot? I’m guessing
the bridge.
So
the bridge would be from DMR ID2 to DMR ID1 and the codeplug
would be programmed with a group call to DMR ID2.
-Will
I don't think
it makes a difference. Though, some radios don't like hearing
traffic from their own ID. The fly in the ointment is that the
audio is heard on hoseline all the time and only sometime on
the radio.
On 6/8/2018 10:37 AM, WillieB wrote:
I
wonder if the intermittent audio issue is only happening
while bridging to a DMR ID, or does anyone else have this
issue bridging to a DMR talk group as well?
-Will
From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On
Behalf Of WillieB
Sent: Tuesday, June 5, 2018 9:31 PM
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] Intermittent No Audio
Ok, I have some more info. I was just
able to listen to a long net so I did a little more
troubleshooting.
To be clear I'm using a DMR HT
connected to the bridge, connected to AllStar node
45221.
When the issue is happening, one of
2 things happen. My hotspot transmits and shows my DMR
ID the entire time, and it's either completely silent
on the HT or there is a low audio digital type sound
coming out of the DMR HT. It may happen in the middle
of someone talking, or at the beginning. It's usually
at the beginning though.
Also, I can hear the audio fine on
Brandmeister hoseline. See below for a link to a video
of the issue happening (with the low digital sound). The audio you will hear in
the background is hoseline (My DMR ID) playing on a
computer right next to me. All that's coming out of
the HT is the digital signal you hear. When it drops
and starts back talking then you can hear the audio
fine out of the HT. And the next time it does it, it
may be completely silent or may have the low audio
digital signal again.
Seems
to me it's between Brandmeister and my hotspot, but
I'm not sure what triggers it. I guess it could be
related to how the audio is converted, not sure. I
don't have the same issues listening to other DMR
TGs.
On Tue, Jun 5, 2018 at 5:38 PM, Steve
N4IRS <szingman@...>
wrote:
Will,
Mike and I have been discussing where we think the
issue might be. Don't reduce the minimum hang time
or you will run into the BM "loop detector"
You mentioned that you are listening on a hot spot.
Do you have the log for the time period that is the
same as the other 2 logs you posted? When this
happen, does your DMR radio still display the proper
data while listening to silence?
Steve
On 06/05/2018 04:16 PM, WillieB
wrote:
Any ideas on the intermittent
audio issue? The only setting I see in
Analog_Bridge.ini is below. Could changing this
help at all?
minTxTimeMS = 2000
; Minimum time in MS for hang
delay
On Mon, Jun 4, 2018 at 2:14
PM, WillieB <will@...>
wrote:
I’ve
been busy but finally had a chance to
catch it this morning. See attached
logs. It happened right at the end of
each log. I believe all the extended
hang times at the end are related. It
doesn’t seem to show much else but
maybe that will give us some ideas…?
Will,
Since the data flows from ASL to MB
through AB, it's good to tail both the
AB and MB logs. You should see waht is
happening in "real time"
Steve
On
06/01/2018 08:08 PM, WillieB wrote:
My
bridge is working very well, however
I do have one main problem.
Sometimes
when one person stops talking and
another person takes their turn,
my hotspot transmits but there's
no audio coming out. Then next
time it drops and someone else
starts talking I hear the audio.
It may do this in about 1 out of 5
transmissions or so. It varies per
person and AllStar node I'm
connected to. I'm not sure if it's
when they key up fast or what.
I
can listen on the AllStar node and
I hear the audio there, but not on
DMR.
Anyone
else having that problem? I was
going to go check out the
Analog_Bridge.ini file and see if
there are any settings in there
that might make sense changing but
maybe someone can give me some
ideas before I go poking around
and changing things (after backing
up the ini of course!).
I
can also tail -f the 2 log files
when it's happening and see if
that gives me any clues to what
might be going on.
|
