Re: Repeater ID can not be the same as subscriber ID


Steve N4IRS
 

Chris,
I just pasted your AMBE_AUDIO stanza into a test Analog_Bridge.ini I did not get the error. Could you please post the complete startup from Analog_bridge.

Thanks, Steve

On 06/08/2018 11:08 PM, Chris Andrist, KC7WSU wrote:

I: 2018-06-09 03:08:10.164 Analog Bridge Version 1.1 Wed May 30 09:44:39 EDT 2018
I: 2018-06-09 03:08:10.164 Copyright (C) 2018 DVSwitch, INAD.
I: 2018-06-09 03:08:10.164 Created by Mike N4IRR and Steve N4IRS
I: 2018-06-09 03:08:10.164 Analog Bridge comes with ABSOLUTELY NO WARRANTY
I: 2018-06-09 03:08:10.164
I: 2018-06-09 03:08:10.164 This software is for use on amateur radio networks only,
I: 2018-06-09 03:08:10.164 it is to be used for educational purposes only. Its use on
I: 2018-06-09 03:08:10.164 commercial networks is strictly prohibited.
I: 2018-06-09 03:08:10.164
I: 2018-06-09 03:08:10.164 Analog Bridge is starting
F: 2018-06-09 03:08:10.165 Repeater ID can not be the same as subscriber ID




Here is the info from my Analog_Bridge.ini

; Information for xx_Bridges (Where xx is MMDVM, HB, IPSC)
[AMBE_AUDIO]
server = 127.0.0.1                      ; IP address of xx_Bridge.py
fromDMRPort = 31000                     ; AMBE frames from xx_Bridge (should match "toGatewayPor$
toDMRPort = 31003                       ; AMBE frames from xx_Bridge (should match "fromGatewayP$
ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW
minTxTimeMS = 2000                      ; Minimum time in MS for hang delay
gatewayDmrId = 3149010                  ; ID to use when transmitting from Analog_Bridge
repeaterID = 314905                     ; ID of source repeater
txTg = 31490                            ; TG to use for all frames received from Analog_Bridge -$
txTs = 1                                ; Slot to use for frames received from Analog_Bridge -> $
colorCode = 1                           ; Color Code to assign DMR frames


gatewayDmrId and repeaterID are not the same, not sure why I am getting this.

Regards,

Chris Andrist, KC7WSU
DMR-UTAH

Join main@DVSwitch.groups.io to automatically receive all group messages.