- C Bridge to P25 Reflector
Re: C Bridge to P25 Reflector
toggle quoted messageShow quoted text
Success! Do I need to change anything else under [AMBE_AUDIO] for Analog_bridge_2?
I: 2018-07-17 01:39:11.007 Begin TX: src=3148242 rpt=0 dst=8207 slot=2 cc=0
D: 2018-07-17 01:39:12.824 End TX
I: 2018-07-17 01:39:21.690 Begin TX: src=3148242 rpt=0 dst=8207 slot=2 cc=0
D: 2018-07-17 01:39:23.327 End TX
I: 2018-07-17 01:39:25.043 Begin TX: src=3148242 rpt=0 dst=8207 slot=2 cc=0
D: 2018-07-17 01:39:25.594 End TX
I: 2018-07-17 01:39:39.947 Begin TX: src=3148242 rpt=0 dst=8207 slot=2 cc=0
D: 2018-07-17 01:39:44.125 End TX
On Mon, Jul 16, 2018 at 8:20 PM, Steve N4IRS <szingman@...>
You need to make sure the P25 TX and RX ports in DVSwitch.ini point
to the proper ports in Analog_Bridge.ini
On 07/16/2018 09:15 PM, KD5DFB wrote:
trying to take this in small steps and not fry my noodle.
am working from P25 reflector to c bridge. I have the p25
reflector up and running. I can see my voice traffic on the
P25Gateway log and the MMDVM_Bridge log.
there anything else I need change in MMDVM_Bridge.ini? I have
changed the following:
I see any traffic if I tail the log or run it ./Analog_Bridge
Join main@DVSwitch.groups.io to automatically receive all group messages.