Re: Bridging from MMDVM repeater to IPSC network


Rob WX1N
 

Yes. Here's what I'm seeing in the IPSC_Bridge window. If this doesn't tell you anything, I don't want to take up any more of your time, this is a learning experience for me that doesn't contribute to the project development.

INFO DMRLink IPSC Bridge
INFO (SAMPLE_PEER) Registering with the Master: <redacted>
WARNING (SAMPLE_PEER) Registration response (we requested reg) from the Master: 3102, <redacted> (1 peers)
INFO (SAMPLE_PEER), No Peer List - Requesting One From the Master
INFO (SAMPLE_PEER) Begin AMBE encode STREAM ID: 2216044619 SUB: WX1N (3133257) REPEATER: WX1NH (313323) TGID 313324 (313324), TS 1
INFO (SAMPLE_PEER) Begin AMBE encode STREAM ID: 1125825989 SUB: WX1N (3133257) REPEATER: WX1NH (313323) TGID 313324 (313324), TS 1

-----Original Message-----
From: DVSwitch@groups.io [mailto:DVSwitch@groups.io] On Behalf Of Steve N4IRS
Sent: Friday, June 23, 2017 12:23 PM
To: DVSwitch@groups.io
Subject: Re: [DVSwitch] Bridging from MMDVM repeater to IPSC network

Do I have the data right?
313324 : [ { "network" : 313323, "slot" : 1 } ],

On 6/23/2017 12:21 PM, Rob WX1N wrote:
Still doesn't seem to be going through, I don't see it on hose.repeater.net/313324, and I don't see anything coming through on our other repeater.

-----Original Message-----
From: DVSwitch@groups.io [mailto:DVSwitch@groups.io] On Behalf Of
Steve N4IRS
Sent: Friday, June 23, 2017 12:13 PM
To: DVSwitch@groups.io
Subject: Re: [DVSwitch] Bridging from MMDVM repeater to IPSC network

I have added Radio ID 313323 TS1 TG 313324 to bridge.json on BM server 3102.

On 6/23/2017 12:02 PM, Rob WX1N wrote:
Radio ID 313323, TS 1, TG 313324. Just to make sure I'm understanding this right - a valid IPSC connection to BM will pass absolutely nothing back and forth until it is preconfigured on the server end?

-----Original Message-----
From: DVSwitch@groups.io [mailto:DVSwitch@groups.io] On Behalf Of
Steve N4IRS
Sent: Friday, June 23, 2017 12:00 PM
To: DVSwitch@groups.io
Subject: Re: [DVSwitch] Bridging from MMDVM repeater to IPSC network

Let me be a little more clear. The connection from DMRlink to BM is as you say considered by BM as a SmartPTT connection. For a BM SmartPTT connection, a BM admin (I am one) has to configure the bridge in BM. I will need the following:
Radio_ID: in dmrlink.cfg
The TS and TG you want to bridge.

This can NOT be configured from a self care account.

On 6/23/2017 11:58 AM, Rob WX1N wrote:
Steve,
In the DMR link configuration, I'm signing in to 3102 as the
repeater ID, which has several static TG's preconfigured. I'm
transmitting using my personal ID, on one of the static TG's
(although if I were using a different TG, wouldn't it bring it up as
a dynamic for a few
minutes?)

-----Original Message-----
From: DVSwitch@groups.io [mailto:DVSwitch@groups.io] On Behalf Of
Steve N4IRS
Sent: Friday, June 23, 2017 11:55 AM
To: DVSwitch@groups.io
Subject: Re: [DVSwitch] Bridging from MMDVM repeater to IPSC network

Rob,
Is 3102 setup to bridge the TG you are trying from the Radio ID you are presenting to BM?

On 6/23/2017 11:53 AM, Rob WX1N wrote:
Good morning,

I'm hoping for some basic info if one of you has the time to point me in the right direction. I know this is still a work in progress and I don't want to interfere with that, so if this isn't a quick answer, then please disregard.

I'm playing around with the new Bridge branches of HBlink and DMRlink. I wanted to see if I could successfully connect an MMDVM repeater to an IPSC network. I set it up as follows: MMDVM set to connect to local instance of HBlink (successful). HBlink configuration as a master to allow MMDVM to connect. Run MMDVMHost, run HB_Bridge.py. DMRlink configured as a peer to connect to the IPSC connection of 3102. Run IPSC_Bridge.py.
Results - MMDVM connects to HBlink and transmissions show in both HB_Bridge and IPSC_Bridge terminal windows, however, the transmissions don't seem to be making it through to the network. I think I am connected to 3102, as the repeater shows up in the 3102 status page (albeit as a SmartPTT network).

Does anyone have a guess as to where I'm going wrong?

Rob, WX1N














Join main@DVSwitch.groups.io to automatically receive all group messages.