Re: AMBED


Ken KE2N
 

I am building DV switch on the same box where I was experimenting with XLX - so the device was already there.  Initially I got some audio to pass from DMR to analog and it sounded kind of "muddy" so I thought I would give the hardware a try.  I may want DSTAR in this too so I would have some hardware transcoding in any case.

I unplugged the 6 channel device and plugged in two ThumDV's. They appear as /dev/ttyUSB0 and /dev/ttyUSB1.
I modified the ini file and have this startup (below) -
>> are the error messages anything to worry about?
>> do I need to add a line for USB1 ?


M: 2018-07-24 18:24:22.584 Setting [DV3000] address -> /dev/ttyUSB0
M: 2018-07-24 18:24:22.584 Setting [DV3000] baud -> 460800
M: 2018-07-24 18:24:22.584 Setting [DV3000] serial -> true
W: 2018-07-24 18:24:22.584 ioctl reset error
W: 2018-07-24 18:24:22.584 ioctl speed error
W: 2018-07-24 18:24:22.584 ioctl stereo error
W: 2018-07-24 18:24:22.584 ioctl setfmt error
M: 2018-07-24 18:24:22.584 Audio In/Out Device: /dev/null
I: 2018-07-24 18:24:22.584 Open UDP listener on 127.0.0.1:31100
I: 2018-07-24 18:24:22.584 Open USRP on 127.0.0.1:32001
M: 2018-07-24 18:24:22.584 Connecting to DV3000 hardware......
M: 2018-07-24 18:24:22.631 Begin DV3000 decode
M: 2018-07-24 18:24:22.631 DV3000 latency is currently set to 16


Join main@DVSwitch.groups.io to automatically receive all group messages.