- Early Adopters Pre-Sale for the Digital Radio Amateur Workstation - DRAWS
Re: Early Adopters Pre-Sale for the Digital Radio Amateur Workstation - DRAWS
toggle quoted messageShow quoted text
It uses some of the GPIO busses and pins. These are not compatible across SBCs. A lot of the capability is due to the use of this functionality and would be limited by making it a USB device.
Raspberry Pi has sufficient computing for the applications we are designing for and there are millions of them deployed. They are inexpensive and have active development and community.
Our development and support costs go up with more platforms.
We are going to offer the DRAWS as a complete and integrated unit to drop into a station, at which point the SBC is just a part of the solution. We prefer to focus our efforts on this
On Mon, Sep 24, 2018, 19:11 Will - W4WWM <w4wwm@...
Nice product, why not make the little unit compatible with other
SBCs other than Rasberry Pi? Maybe an added usb port to interface
would make the unit interface with many SBCs and making sales go
up even more?
Will / W4WWM
On 9/21/2018 3:52 PM, John D Hays -
DRAWS - Raspberry Pi HAT
[The boards will be run in the next couple of weeks, this is
an opportunity to order early and save $20 on the board, and
$5 on the GPS LNA Antenna]
• Raspberry Pi 3 Compliant HAT
• Power HAT and Pi from 6-15VDC
• Onboard Voltage Monitor
• 2 Radio Interfaces
• On Board GPS
• Optional External Antenna w/LNA
• PPS for Stratum 1 Time Source
• Battery Backed Real Time Clock
• Accessory Port
• PWR, IO, Serial Port, Analog In
• Headless, operate from your Computer
• Workstation, operate locally by adding
Open Source Software:
DRAWS™ self identifies to the OS for
An image will be available on release with
popular applications pre-installed, including:
• Digital Voice Repeater/Hotspot
Order at http://nwdigitalradio.com/product/draws-digital-radio-amateur-workstation/
For those who were not in attendance at DCC or the NWAPRS
Summer Gathering, NW Digital Radio will be offering
a tiered roll out of the DRAWS product.
Individual components such as the DRAWS HAT, GPS LNA
Antenna, Metal Case, Pre-loaded SD Card, ... will be
available for purchase independently.
The initial offering will be only for the HAT and optional
antenna. Other offerings will roll out over the 4th
There will also be an offer for a complete, assembled
system with all components integrated in a single package.
Specific bundles (e.g. everything but the Raspberry Pi)
may be offered as well.
John D. Hays
Join main@DVSwitch.groups.io to automatically receive all group messages.