Hi there -- Dan ve4drk from Winnipeg here.
(warning - long email - two logs)
I've been going through Steve's document on the Analog to DMR config and am almost there. Great/easy write-up too.
Initially, when I did the update, I had one error which apparently was corrected by running the script again.
It had an error on dvswitch-base - but after attempt #2, it went through apparently ok.
(log of the script is as such:
---------------------------------------------------------------------------------------------------
root@aslhub:/etc/asterisk# apt-get install dvswitch -y
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
analog-bridge binfmt-support dvswitch-base md380-emu mmdvm-bridge qemu-user-static
The following NEW packages will be installed:
analog-bridge binfmt-support dvswitch dvswitch-base md380-emu mmdvm-bridge qemu-user-static
0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
Need to get 12.6 MB of archives.
After this operation, 90.5 MB of additional disk space will be used.
Get:1 http://http.us.debian.org/debian stretch/main amd64 binfmt-support amd64 2.1.6-2 [59.5 kB]
Get:2 http://dvswitch.org/ASL_Repository stretch/hamradio amd64 dvswitch-base all 1.01-20180420-9 [1,623 kB]
Get:3 http://http.us.debian.org/debian stretch/main amd64 qemu-user-static amd64 1:2.8+dfsg-6+deb9u4 [8,985 kB]
Get:4 http://dvswitch.org/ASL_Repository stretch/hamradio amd64 analog-bridge amd64 1.1-20180424-11 [155 kB]
Get:5 http://dvswitch.org/ASL_Repository stretch/hamradio amd64 dvswitch all 1.01-20180420-3 [2,144 B]
Get:6 http://dvswitch.org/ASL_Repository stretch/hamradio amd64 md380-emu amd64 1.1-20180424-5 [687 kB]
Get:7 http://dvswitch.org/ASL_Repository stretch/hamradio amd64 mmdvm-bridge amd64 1.1-20180424-5 [1,055 kB]
Fetched 12.6 MB in 3s (3,611 kB/s)
Selecting previously unselected package dvswitch-base.
(Reading database ... 58727 files and directories currently installed.)
Preparing to unpack .../0-dvswitch-base_1.01-20180420-9_all.deb ...
Unpacking dvswitch-base (1.01-20180420-9) ...
Selecting previously unselected package analog-bridge.
Preparing to unpack .../1-analog-bridge_1.1-20180424-11_amd64.deb ...
Unpacking analog-bridge (1.1-20180424-11) ...
Selecting previously unselected package binfmt-support.
Preparing to unpack .../2-binfmt-support_2.1.6-2_amd64.deb ...
Unpacking binfmt-support (2.1.6-2) ...
Selecting previously unselected package dvswitch.
Preparing to unpack .../3-dvswitch_1.01-20180420-3_all.deb ...
Unpacking dvswitch (1.01-20180420-3) ...
Selecting previously unselected package qemu-user-static.
Preparing to unpack .../4-qemu-user-static_1%3a2.8+dfsg-6+deb9u4_amd64.deb ...
Unpacking qemu-user-static (1:2.8+dfsg-6+deb9u4) ...
Selecting previously unselected package md380-emu.
Preparing to unpack .../5-md380-emu_1.1-20180424-5_amd64.deb ...
Unpacking md380-emu (1.1-20180424-5) ...
Selecting previously unselected package mmdvm-bridge.
Preparing to unpack .../6-mmdvm-bridge_1.1-20180424-5_amd64.deb ...
Unpacking mmdvm-bridge (1.1-20180424-5) ...
Setting up binfmt-support (2.1.6-2) ...
Created symlink /etc/systemd/system/multi-user.target.wants/binfmt-support.service → /lib/systemd/system/binfmt-support.service.
Setting up dvswitch-base (1.01-20180420-9) ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 21230 0 21230 0 0 18773 0 --:--:-- 0:00:01 --:--:-- 18787
dpkg: error processing package dvswitch-base (--configure):
subprocess installed post-installation script returned error exit status 4
dpkg: dependency problems prevent configuration of mmdvm-bridge:
mmdvm-bridge depends on dvswitch-base; however:
Package dvswitch-base is not configured yet.
dpkg: error processing package mmdvm-bridge (--configure):
dependency problems - leaving unconfigured
Setting up dvswitch (1.01-20180420-3) ...
dpkg: dependency problems prevent configuration of analog-bridge:
analog-bridge depends on dvswitch-base; however:
Package dvswitch-base is not configured yet.
dpkg: error processing package analog-bridge (--configure):
dependency problems - leaving unconfigured
Processing triggers for systemd (232-25+deb9u4) ...
Setting up qemu-user-static (1:2.8+dfsg-6+deb9u4) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up md380-emu (1.1-20180424-5) ...
Created symlink /etc/systemd/system/multi-user.target.wants/md380-emu.service → /lib/systemd/system/md380-emu.service.
Errors were encountered while processing:
dvswitch-base
mmdvm-bridge
analog-bridge
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@aslhub:/etc/asterisk# apt-get install dvswitch -y
Reading package lists... Done
Building dependency tree
Reading state information... Done
dvswitch is already the newest version (1.01-20180420-3).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up dvswitch-base (1.01-20180420-9) ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 21230 0 21230 0 0 13448 0 --:--:-- 0:00:01 --:--:-- 13445
Updating /var/lib/mmdvm/XLXHosts.txt ...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 7004 100 7004 0 0 3970 0 0:00:01 0:00:01 --:--:-- 3970
Created symlink /etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service → /lib/systemd/system/systemd-networkd-wait-online.service.
Created symlink /etc/systemd/system/multi-user.target.wants/netcheck.service → /lib/systemd/system/netcheck.service.
Setting up mmdvm-bridge (1.1-20180424-5) ...
Created symlink /etc/systemd/system/multi-user.target.wants/mmdvm_bridge.service → /lib/systemd/system/mmdvm_bridge.service.
Setting up analog-bridge (1.1-20180424-11) ...
Created symlink /etc/systemd/system/multi-user.target.wants/analog_bridge.service → /lib/systemd/system/analog_bridge.service.
W: APT had planned for dpkg to do more than it reported back (6 vs 10).
Affected packages: dvswitch-base:amd64
---------------------------------------------------------------------------------------
After that, all was fine for quite some time and all the tests were good until I got to page 10 of the instructions and attempted to run ./MMDVM_Bridge MMDVMBridge.ini
had an error with credentials.
I did find the IP address of the local (Canada) brandmeister server. (we apparently only have one for this country).
I did confirm my password was set properly, yet I get the following:
root@aslhub:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2018-09-26 21:24:59.240 MMDVM_Bridge:
I: 2018-09-26 21:24:59.240 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2018-09-26 21:24:59.240 Hacks by Mike N4IRR and Steve N4IRS
I: 2018-09-26 21:24:59.241 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2018-09-26 21:24:59.245 This software is for use on amateur radio networks only,
I: 2018-09-26 21:24:59.245 it is to be used for educational purposes only. Its use on
I: 2018-09-26 21:24:59.245 commercial networks is strictly prohibited.
I: 2018-09-26 21:24:59.245 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2018-09-26 21:24:59.245 MMDVM_Bridge-20180423 is starting
M: 2018-09-26 21:24:59.245 Built 15:47:01 May 30 2018 (GitID #9cdea41)
I: 2018-09-26 21:24:59.245 General Parameters
I: 2018-09-26 21:24:59.245 Callsign: VE4DRK
I: 2018-09-26 21:24:59.245 Id: 302401901
I: 2018-09-26 21:24:59.246 Duplex: no
I: 2018-09-26 21:24:59.246 Timeout: 180s
I: 2018-09-26 21:24:59.246 D-Star: disabled
I: 2018-09-26 21:24:59.246 DMR: enabled
I: 2018-09-26 21:24:59.246 YSF: disabled
I: 2018-09-26 21:24:59.246 P25: disabled
I: 2018-09-26 21:24:59.246 NXDN: disabled
I: 2018-09-26 21:24:59.246 Modem Parameters
I: 2018-09-26 21:24:59.246 Port: /dev/null
I: 2018-09-26 21:24:59.246 RX Invert: no
I: 2018-09-26 21:24:59.247 TX Invert: no
I: 2018-09-26 21:24:59.247 PTT Invert: no
I: 2018-09-26 21:24:59.247 TX Delay: 100ms
I: 2018-09-26 21:24:59.247 RX Offset: 0Hz
I: 2018-09-26 21:24:59.247 TX Offset: 0Hz
I: 2018-09-26 21:24:59.247 RX DC Offset: 0
I: 2018-09-26 21:24:59.247 TX DC Offset: 0
I: 2018-09-26 21:24:59.247 RF Level: 100.0%
I: 2018-09-26 21:24:59.247 DMR Delay: 0 (0.0ms)
I: 2018-09-26 21:24:59.247 RX Level: 50.0%
I: 2018-09-26 21:24:59.247 CW Id TX Level: 50.0%
I: 2018-09-26 21:24:59.247 D-Star TX Level: 50.0%
I: 2018-09-26 21:24:59.247 DMR TX Level: 50.0%
I: 2018-09-26 21:24:59.247 YSF TX Level: 50.0%
I: 2018-09-26 21:24:59.247 P25 TX Level: 50.0%
I: 2018-09-26 21:24:59.247 NXDN TX Level: 50.0%
I: 2018-09-26 21:24:59.247 RX Frequency: 146475000Hz (146475000Hz)
I: 2018-09-26 21:24:59.247 TX Frequency: 146475000Hz (146475000Hz)
M: 2018-09-26 21:24:59.248 Opening the MMDVM
I: 2018-09-26 21:24:59.248 Display Parameters
I: 2018-09-26 21:24:59.248 Type:
I: 2018-09-26 21:24:59.248 DMR Network Parameters
I: 2018-09-26 21:24:59.248 Address: 158.69.203.89
I: 2018-09-26 21:24:59.248 Port: 62031
I: 2018-09-26 21:24:59.248 Local: 62032
I: 2018-09-26 21:24:59.248 Jitter: 360ms
I: 2018-09-26 21:24:59.248 Slot 1: disabled
I: 2018-09-26 21:24:59.248 Slot 2: enabled
I: 2018-09-26 21:24:59.248 Mode Hang: 3s
I: 2018-09-26 21:24:59.249 Info Parameters
I: 2018-09-26 21:24:59.249 Callsign: VE4DRK
I: 2018-09-26 21:24:59.249 RX Frequency: 146475000Hz
I: 2018-09-26 21:24:59.249 TX Frequency: 146475000Hz
I: 2018-09-26 21:24:59.249 Power: 1W
I: 2018-09-26 21:24:59.249 Latitude: 49.836800deg N
I: 2018-09-26 21:24:59.249 Longitude: -97.078140deg E
I: 2018-09-26 21:24:59.250 Height: 0m
I: 2018-09-26 21:24:59.250 Location: "Winnipeg, MB (EN19lu)"
I: 2018-09-26 21:24:59.250 Description: "MMDVM_Bridge"
I: 2018-09-26 21:24:59.250 URL: "https://groups.io/g/DVSwitch"
M: 2018-09-26 21:24:59.250 DMR, Opening DMR Network
I: 2018-09-26 21:24:59.250 RSSI
I: 2018-09-26 21:24:59.250 Mapping File: RSSI.dat
W: 2018-09-26 21:24:59.250 Cannot open the RSSI data file - RSSI.dat
I: 2018-09-26 21:24:59.250 DMR Id Lookups
I: 2018-09-26 21:24:59.250 File: /var/lib/mmdvm/DMRIds.dat
I: 2018-09-26 21:24:59.250 Reload: 24 hours
I: 2018-09-26 21:24:59.431 Loaded 111282 Ids to the DMR callsign lookup table
I: 2018-09-26 21:24:59.432 DMR RF Parameters
I: 2018-09-26 21:24:59.433 Id: 302401901
I: 2018-09-26 21:24:59.433 Color Code: 1
I: 2018-09-26 21:24:59.433 Self Only: no
I: 2018-09-26 21:24:59.433 Embedded LC Only: yes
I: 2018-09-26 21:24:59.433 Dump Talker Alias Data: no
I: 2018-09-26 21:24:59.433 Prefixes: 0
I: 2018-09-26 21:24:59.433 Call Hang: 3s
I: 2018-09-26 21:24:59.433 TX Hang: 3s
I: 2018-09-26 21:24:59.433 Mode Hang: 10s
M: 2018-09-26 21:24:59.433 DMR, Opening INI file: DVSwitch.ini
M: 2018-09-26 21:24:59.434 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2018-09-26 21:24:59.434 DMR, Setting [DMR] TXPort -> 31100
M: 2018-09-26 21:24:59.434 DMR, Setting [DMR] RXPort -> 31103
M: 2018-09-26 21:24:59.434 DMR, Setting [DMR] Slot -> 2
I: 2018-09-26 21:24:59.432 Started the DMR Id lookup reload thread
M: 2018-09-26 21:24:59.437 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
M: 2018-09-26 21:24:59.437 MMDVM_Bridge-20180423 is running
D: 2018-09-26 21:25:09.466 DMR, Sending authorisation
E: 2018-09-26 21:25:09.504 DMR, Login to the master has failed, retrying network ...
M: 2018-09-26 21:25:09.505 DMR, Closing DMR Network
M: 2018-09-26 21:25:09.505 DMR, Opening DMR Network
D: 2018-09-26 21:25:19.543 DMR, Sending authorisation
E: 2018-09-26 21:25:19.581 DMR, Login to the master has failed, retrying network ...
M: 2018-09-26 21:25:19.581 DMR, Closing DMR Network
M: 2018-09-26 21:25:19.581 DMR, Opening DMR Network
^CM: 2018-09-26 21:25:19.762 Closing the MMDVM
I: 2018-09-26 21:25:20.442 Stopped the DMR Id lookup reload thread
M: 2018-09-26 21:25:20.443 DMR, Closing DMR Network
I: 2018-09-26 21:25:20.443 MMDVM_Bridge-20180423 exited on receipt of SIGINT
-----------------------------------------------------------------------------------------
So, it keeps on telling me login to the master had failed. Not sure what I did wrong as I have the same credentials as I log into the brandmeister.network with.
Anyone spot what I could have done wrong. I have to assume it's me as others are using this script just fine HI HI
73, Dan ve4drk