On the DMR side, show me the DVSwitch.ini [DMR] stanza
toggle quoted messageShow quoted text
On the DMR side, show me the Analog_Bridge.ini [AMBE_AUDIO] stanza
On the P25 side, show me the DVSwitch.ini [P25] stanza
On the P25 side, show me the Analog_Bridge.ini [AMBE_AUDIO] stanza
Just those 4 stanzas (for now)
That is correct - but only one instance of
73, Mike - N6MIK
On Tue, Jan 15, 2019 at 2:51 PM Steve N4IRS <szingman@...
I see a lot of this in the log:
"P25, got AMBE/DSAMBE (TAG=7) and expected IMBE (change to
88 bits)" - Not sure how to address?
You have 2 instances of Analog_Bridge. One is configured
for DMR (that is connected to the MMDVM_Bridge connecting
to BM) and one is configured for P25 (That is connected to
MMDVM_Bridge configured for P24)
Is this correct?
I think I've got everything running but
could use some clarification on two things:
I see P25 and DMR traffic in the MMDVM_bridge
log, and the P25Gateway is connected to the
reflector, however I'm not getting any
- Do the P25 and DMR talkgroups need to match? In
my current config, they do not. Could this be a
- I see a lot of this in the log: "P25, got
AMBE/DSAMBE (TAG=7) and expected IMBE (change to 88
bits)" - Not sure how to address?
Mike - N6MIK
On Mon, Jan 14, 2019 at 8:13 PM <mike@...
Thanks Steve. I'll grab those
components and start experimenting!
I have an existing P25Reflector that connects a
couple of MMDVM repeaters (primarily P25 users)
and wish to bridge a talk group with one on
I'm going to try this on a R-pi 3b+; do you
think that's going to be robust enough to run
Mike - N6MIK
On Mon, Jan 14, 2019 at 7:58 PM Steve
Yes you will need those things also. here is a
P25Reflector <-> P25Gateway <->
MMDVM_Bridge <-> Analog_Bridge <->
Analog_Bridge <-> MMDVM_Bridge <->
DMR Master (BM, HB etc)
You will need 2 instances of Analog_Bridge
The 2 MMDVM_Bridges can be done as one
The question is, what exactly are you trying
to bridge? That will tell us more about the
ends of the bridge.
73, Steve N4IRS
I'm brand new to the group, but
have been experimenting with DMR and
P25 for a while. I am looking to build
a bridge between P25 and DMR, and have
found just enough to confuse me on the
It looks like I'll need
MMDVM_Bridge for sure - but I am
unclear what other components I need.
I have also seen a post (possibly
outdated) that talks about needing
gateways, reflectors and a couple of
analog bridges... but something is
telling me that may not be the case.
Am I on the right track? Any
pointers are appreciated!
Thanks and 73,
Mike - N6MIK