Re: XLX to YSF

Steve N4IRS

From what program. Post the log output.

On 1/23/19 4:15 PM, Doug - W4DBG wrote:
I am getting:

Cannot bind the UDP Address, err: 99

That might be my problem.

On Wed, Jan 23, 2019 at 12:33 PM Steve N4IRS <szingman@...> wrote:
Maybe this will help:
root@repeater:/opt/DMRGateway# ./DMRGateway DMRGateway.ini
I: 2019-01-23 18:31:40.982 This software is for use on amateur radio networks only,
I: 2019-01-23 18:31:40.982 it is to be used for educational purposes only. Its use on
I: 2019-01-23 18:31:40.982 commercial networks is strictly prohibited.
I: 2019-01-23 18:31:40.982 Copyright(C) 2017 by Jonathan Naylor, G4KLX and others
M: 2019-01-23 18:31:40.983 DMRGateway-20180606 is starting
M: 2019-01-23 18:31:40.983 Built 11:29:08 Jan 10 2019 (GitID #9579565)
I: 2019-01-23 18:31:40.983 MMDVM Network Parameters
I: 2019-01-23 18:31:40.983     Rpt Address:
I: 2019-01-23 18:31:40.983     Rpt Port: 62032
I: 2019-01-23 18:31:40.983     Local Address:
I: 2019-01-23 18:31:40.983     Local Port: 62031
M: 2019-01-23 18:31:40.984 MMDVM Network, Opening
M: 2019-01-23 18:31:40.984 Waiting for MMDVM to connect.....
M: 2019-01-23 18:32:00.014 MMDVM has connected
I: 2019-01-23 18:32:00.015 Rule trace: no
I: 2019-01-23 18:32:00.017 Loaded 301 XLX reflectors
I: 2019-01-23 18:32:00.017 XLX Network Parameters
I: 2019-01-23 18:32:00.018     Id: 3112138
I: 2019-01-23 18:32:00.018     Hosts file: ./XLXHosts.txt
I: 2019-01-23 18:32:00.018     Reload time: 60 minutes
I: 2019-01-23 18:32:00.018     Local: random
I: 2019-01-23 18:32:00.018     Port: 62030
I: 2019-01-23 18:32:00.018     Slot: 2
I: 2019-01-23 18:32:00.018     TG: 6
I: 2019-01-23 18:32:00.018     Base: 64000
I: 2019-01-23 18:32:00.018     Startup: XLX334
I: 2019-01-23 18:32:00.018     Relink: 10 minutes
I: 2019-01-23 18:32:00.018     User Control: enabled
I: 2019-01-23 18:32:00.018      Module: E
I: 2019-01-23 18:32:00.019 XLX: Using original configuration message: N4IRS   222340000224940000010141.73329-50.39989000Iceberg, North AtlanMMDVM_Bridge       4                                                                                                20180423                                MMDVM_Unknown    
M: 2019-01-23 18:32:00.019 XLX, Opening DMR Network
M: 2019-01-23 18:32:00.019 XLX, Connecting to XLX334
I: 2019-01-23 18:32:00.019 Voice Parameters
I: 2019-01-23 18:32:00.019     Enabled: yes
I: 2019-01-23 18:32:00.019     Language: en_US
I: 2019-01-23 18:32:00.019     Directory: ./Audio
M: 2019-01-23 18:32:00.020 DMRGateway-20180606 is running
D: 2019-01-23 18:32:10.071 XLX, Sending authorisation
D: 2019-01-23 18:32:10.122 XLX, Sending configuration
M: 2019-01-23 18:32:10.173 XLX, Logged into the master successfully
M: 2019-01-23 18:32:10.173 XLX, Linking to reflector XLX334 E

On 1/23/2019 1:29 PM, Doug - W4DBG wrote:
There is an E but no parrot is installed. 

I guess I have muffed something up. I have the same thing as you but no module showing. 

I checked the log and it looks like it connects and disconnects. 

On Wed, Jan 23, 2019 at 12:28 PM Steve N4IRS <szingman@...> wrote:
Is there a Echo module? E?

On 1/23/2019 9:44 AM, Doug - W4DBG wrote:
I will keep plugging away at it. I must still have something “off” attached is a photo of the reflector dashboard showing the module missing. 

On Wed, Jan 23, 2019 at 8:20 AM Steve N4IRS <szingman@...> wrote:
I have zero experience with XLX and DMRGateway but I think what you want is is DMRGateway.ini
[XLX Network]
# Local=3351
#Allow user linking control using Private Calls
#Override default module for startup reflector
#Module=A <-------------------------------------------------------- Uncomment this and set to the module you want.

On 1/23/2019 9:15 AM, Doug - W4DBG wrote:

On Wed, Jan 23, 2019 at 8:15 AM Steve N4IRS <szingman@...> wrote:
It is.
Are you using DMRGateway to connect to XLX or going direct from MMDVM_Bridge?


On 1/23/2019 9:13 AM, Doug - W4DBG wrote:
Maybe I am missing something. Is YSF2DMR in the setup?

I thought that was a hotspot setting?

On Wed, Jan 23, 2019 at 7:13 AM Steve KC1AWV <smiller@...> wrote:
Hi Doug-

I assume you're using YSF2DMR? The DMR Network stanza by default shows commented out settings for XLX. Here's mine for example.

[DMR Network]
Id=[Your DMR ID]
# For TG call: StartupPC=0
# Local=62032
# Options=

Steve KC1AWV

On Wed, Jan 23, 2019 at 8:11 AM Doug - W4DBG <douggooden@...> wrote:
Hello to the group...

I have read other threads but I haven't really seen an answer that I am looking for.

I want to bridge a YSF reflector to a XLX Reflector in DMR mode.

It looks like I am successful connecting to the YSF reflector and the XLX reflector using the proper gateways but on the XLX reflector it is not connected to a specific Module. I just need to know what to change to attach it to a specific module.



Doug Gooden

Steve Miller
Doug Gooden

Doug Gooden

Doug Gooden

Doug Gooden

Doug Gooden

Join to automatically receive all group messages.