Re: Multiple MMDVM _Bridge instances with brandmeister?


Skyler Fennell
 

Mike, the radio ID's are different.

Thank you Steve that solved the problem! Changing the local port fixed it. 


On Sat, Feb 23, 2019 at 4:53 PM Mike KB8JNM <groupio@...> wrote:
Which DMR ID's are you using to connect to the desired talkgroup ?
Those are what I am referring to no matter the number.
'I would be guessing' that if they are the same, only the first connect
will be allowed.

On 2/23/2019 5:07 PM, Skyler Fennell wrote:
> 310847 is the talk-group I want to connect to not a DMR ID. If I try
> 31084701, it does not talk on the proper talk-group since that is not even
> a valid talk group.
>
> So again, here is my audio desired flowcharts:
>
> YSF REFLECTOR < -- > MMDVM_BRIDGE <---> BRANDMEISTER TALKGROUP <-->
> MMDVM_BRIDGE <--> ANALOG_BRIDGE <--> ASL
>
> BRANDMEISTER TALKGROUP --->  MMDVM_BRIDGE --> ANALOG_BRIDGE --> ASL
> &&BRANDMEISTER TALKGROUP --->  MMDBM_BRIDGE --> YSF REFLECTOR
>
>
> I already have tried appending different DMR digits, and even am using
> someone elses call for the second bridge with the DMR ID. I also changed
> all of the DVSWITCH ports so there is no conflict on the local ports.
>
> 1St MMDVM_BRIDGE.ini
>
>
> [General]
>
> Callsign=KG0SKY
>
> Id=MY_ID with 01 at the end
>
> Timeout=180
>
> Duplex=0
>
> RFModeHang=10
>
> NetModeHang=3
>
>
> [DMR Network]
>
> Enable=1
>
> Address=107.191.99.14
>
> Port=62031
>
> Jitter=360
>
> Local=62032
>
> Password=passw0rd
>
> Slot1=1
>
> Slot2=1
>
> Debug=0
>
> 2nd MMDVM_Bridge.ini
>
> [General]
>
> Callsign=KE0VH
>
> Id=KE0VH's ID NUMBER HERE
>
> Timeout=180
>
> Duplex=0
>
> RFModeHang=10
>
> NetModeHang=3
>
>
> [DMR Network]
>
> Enable=1
>
> Address=3102.repeater.net
>
> Port=62031
>
> Jitter=360
>
> Local=62032
>
> Password=passw0rd
>
> Slot1=1
>
> Slot2=1
>
> Debug=0
>
>
>
> 1st DVSwitch.ini
>
> [DMR]
>
> Address = 127.0.0.1             ; Address to send AMBE TLV frames to
> (export)
>
> TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
>
> RXPort = 31103                  ; Port to listen on (import)
>
> Slot = 2                        ; Export slot
>
>
> 2nd DVSwitch.ini
>
> [DMR]
>
> Address = 127.0.0.1             ; Address to send AMBE TLV frames to
> (export)
>
> TXPort = 31106                  ; Port to send AMBE TLV frames to (export)
>
> RXPort = 31109                  ; Port to listen on (import)
>
> Slot = 1                        ; Export slot
>
> [YSF]
>
>
> Address = 127.0.0.1             ; Address to send AMBE TLV frames to
> (export)
>
> TXPort = 31109                  ; Port to send AMBE TLV frames to (export)
>
> RXPort = 31106                  ; Port to listen on (import)
>
> FallbackID = MY_ID_IS_HERE            ; In case we can not find a valid DMR
> id in the database, export this one
>
> ExportTG = 310847                 ; Which TG to export
>
> Slot = 1                        ; Export slot
>
>
>
> Analog_Bridge
>
> [AMBE_AUDIO]
>
> address = 127.0.0.1                     ; IP address of xx_Bridge
>
> txPort = 31103                          ; Transmit TLV frames to partner on
> this port
>
> rxPort = 31100                          ; Listen for TLV frames from
> partner on this port
>
> ambeMode = DMR
>
> minTxTimeMS = 100                      ; Minimum time in MS for hang delay
> (0-10000)
>
>
> ; The metadata below is used when ASL is the source since it does not have
> any concept of digital$
>
> gatewayDmrId = MY_ID                        ; ID to use when transmitting
> from Analog_Bridge
>
> repeaterID = MY_ID_WITH_01_AFTER_IT                          ; ID of source
> repeater
>
> txTg = 310847                              ; TG to use for all frames sent
> from Analog_Bridge -> $
>
> txTs = 1                                ; Slot to use for frames sent from
> Analog_Bridge -> xx_Br$
>
> colorCode = 1                           ; Color Code to assign DMR frames
>
>
> Could this be a port conflict on the DMR master registration and are there
> alternate ports I can use?
>
>
> On Sat, Feb 23, 2019 at 2:35 PM Mike KB8JNM <groupio@...> wrote:
>
>> I think you need to append your dmr id's with extra 1 or 2 digits and
>> make them different.
>>
>> 310847 =
>> 31084701
>> 31084702
>>
>> On 2/23/2019 4:31 PM, Skyler Fennell wrote:
>>> I am attempting to run TWO instances of MMDVM bridge. I made separate
>>> folders for each, and now am trying to run them both from command line.
>>>
>>> ONE is for DMR  310847 -->> ANALOG AllStar
>>>
>>> The OTHER is for YSF --> DMR 310847.
>>>
>>> Both YSF and Analog need to talk to the same DMR Brandmeister talkgroup.
>> I
>>> am using separate ID callsigns for the YSF bridge and the Analog_Bridge
>>>
>>> They both work perfectly standalone, but, when I try to run both, I get
>>> registration errors on Brandmeister:
>>>
>>> W: 2019-02-23 21:28:40.566 DMR, Login to the master has failed, retrying
>>> login ...
>>>
>>>
>>>
>>>
>>> Is it possible to have TWO nodes connected to a brandmeister talkgroup
>> from
>>> the same server?
>>>
>>>
>>> Skyler
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>



Join main@DVSwitch.groups.io to automatically receive all group messages.