Re: Setting up a YSFn <--> ASL bridge


Not sure...
But I would use the ip over the domain. It saves a step looking up the IP address. Double check your info...
the registry shows this...
TG 02034
port 42000

If you would like to test, try ysfn tg 88023 (asl 29999)
port 42000

On 3/23/2019 9:54 AM, steve via Groups.Io wrote:
I've set up numerous DMR <--> ASL bridges and they all work fine.  It seems like it would be a walk in the park to switch out YSFn for DMR.  But I'm having no luck.  The logs haven't been much help either:
From MM_DVM_Bridge.ini:
[System Fusion Network]
And from DVSwitch.ini:
Address =             ; Address to send AMBE TLV frames to (export)
TXPort = 31100                  ; Port to send AMBE TLV frames to (export)
RXPort = 31103                  ; Port to listen on (import)
FallbackID = 3113417            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = 13953                 ; Which TG to export
Slot = 2
And Analog_Bridge.ini:
address =                     ; IP address of xx_Bridge
txPort = 31103                          ; Transmit TLV frames to partner on this port
rxPort = 31100                          ; Listen for TLV frames from partner on this port
ambeMode = YSFN                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
minTxTimeMS = 2000
gatewayDmrId = 3113417                        ; ID to use when transmitting from Analog_Bridge
repeaterID = 311341706                          ; ID of source repeater
txTg = 13953                                ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
colorCode = 1
Does anyone know what I'm doing wrong or have success with doing this and can give me a pointer or two?
Thanks and 73,
Steve - W7RD

Join to automatically receive all group messages.