Re: Setting up a YSFn <--> ASL bridge


Tom Corcoran
 

Steve/Steve,

If there is another way to share log files here, tell me. The AB log is humungus so didn't post it (yet).
--
Tom VE3NY

I: 2019-06-10 16:17:30.975 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-06-10 16:17:30.975 This software is for use on amateur radio networks only,
I: 2019-06-10 16:17:30.975 it is to be used for educational purposes only. Its use on
I: 2019-06-10 16:17:30.975 commercial networks is strictly prohibited.
I: 2019-06-10 16:17:30.975 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-06-10 16:17:30.975 MMDVM_Bridge-20180423 is starting
M: 2019-06-10 16:17:30.975 Built 13:54:43 May 30 2018 (GitID #9cdea41)
I: 2019-06-10 16:17:30.975 General Parameters
I: 2019-06-10 16:17:30.975     Callsign: VE3NY
I: 2019-06-10 16:17:30.975     Id: 3023284
I: 2019-06-10 16:17:30.975     Duplex: no
I: 2019-06-10 16:17:30.975     Timeout: 180s
I: 2019-06-10 16:17:30.975     D-Star: disabled
I: 2019-06-10 16:17:30.975     DMR: disabled
I: 2019-06-10 16:17:30.975     YSF: enabled
I: 2019-06-10 16:17:30.975     P25: disabled
I: 2019-06-10 16:17:30.975     NXDN: disabled
I: 2019-06-10 16:17:30.975 Modem Parameters
I: 2019-06-10 16:17:30.975     Port: /dev/null
I: 2019-06-10 16:17:30.975     RX Invert: no
I: 2019-06-10 16:17:30.975     TX Invert: no
I: 2019-06-10 16:17:30.975     PTT Invert: no
I: 2019-06-10 16:17:30.975     TX Delay: 100ms
I: 2019-06-10 16:17:30.975     RX Offset: 0Hz
I: 2019-06-10 16:17:30.975     TX Offset: 0Hz
I: 2019-06-10 16:17:30.975     RX DC Offset: 0
I: 2019-06-10 16:17:30.975     TX DC Offset: 0
I: 2019-06-10 16:17:30.975     RF Level: 100.0%
I: 2019-06-10 16:17:30.975     DMR Delay: 0 (0.0ms)
I: 2019-06-10 16:17:30.975     RX Level: 50.0%
I: 2019-06-10 16:17:30.975     CW Id TX Level: 50.0%
I: 2019-06-10 16:17:30.975     D-Star TX Level: 50.0%
I: 2019-06-10 16:17:30.975     DMR TX Level: 50.0%
I: 2019-06-10 16:17:30.975     YSF TX Level: 50.0%
I: 2019-06-10 16:17:30.975     P25 TX Level: 50.0%
I: 2019-06-10 16:17:30.975     NXDN TX Level: 50.0%
I: 2019-06-10 16:17:30.975     RX Frequency: 434000000Hz (434000000Hz)
I: 2019-06-10 16:17:30.975     TX Frequency: 434000000Hz (434000000Hz)
M: 2019-06-10 16:17:30.977 Opening the MMDVM
I: 2019-06-10 16:17:30.977 Display Parameters
I: 2019-06-10 16:17:30.977     Type:
I: 2019-06-10 16:17:30.977 System Fusion Network Parameters
I: 2019-06-10 16:17:30.977     Local Address: 0
I: 2019-06-10 16:17:30.977     Local Port: 3200
I: 2019-06-10 16:17:30.977     Gateway Address: 144.217.241.23    ; 96.47.95.121 ysfreflector.dvswitch.org
I: 2019-06-10 16:17:30.977     Gateway Port: 42100
I: 2019-06-10 16:17:30.977     Mode Hang: 3s
M: 2019-06-10 16:17:30.977 Opening YSF network connection
I: 2019-06-10 16:17:30.977 RSSI
I: 2019-06-10 16:17:30.977     Mapping File: RSSI.dat
W: 2019-06-10 16:17:30.977 Cannot open the RSSI data file - RSSI.dat
I: 2019-06-10 16:17:30.977 DMR Id Lookups
I: 2019-06-10 16:17:30.977     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-06-10 16:17:30.977     Reload: 24 hours
I: 2019-06-10 16:17:31.200 Loaded 135612 Ids to the DMR callsign lookup table
I: 2019-06-10 16:17:31.200 YSF RF Parameters
I: 2019-06-10 16:17:31.200     Low Deviation: no
I: 2019-06-10 16:17:31.200     Remote Gateway: no
I: 2019-06-10 16:17:31.200     Self Only: no
I: 2019-06-10 16:17:31.200     DSQ: no
I: 2019-06-10 16:17:31.200     Mode Hang: 10s
M: 2019-06-10 16:17:31.200 YSF, Opening INI file: DVSwitch.ini
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] TXPort -> 35100
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] RXPort -> 35103
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] FallbackID -> 3112488
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] ExportTG -> 77353
M: 2019-06-10 16:17:31.202 YSF, Setting [YSF] Slot -> 2
M: 2019-06-10 16:17:31.202 YSF, Transmitting on 127.0.0.1:35100 and listening on port 35103.  Result = 1
M: 2019-06-10 16:17:31.202 MMDVM_Bridge-20180423 is running
I: 2019-06-10 16:17:31.205 Started the DMR Id lookup reload thread

Join main@DVSwitch.groups.io to automatically receive all group messages.