Hi guys:
Its me again, This time i am assisting a friend of mines in
setting up DStar to DMR link i did some reading and want to make
sure i understand the instructions and doing it correctly.
this is what i have so far.
DSTAR<------>MMDVM_Bridge------>
<-----Analog_Bridge_Dstar.ini---->
<----Analog_Bridge_DMR.ini---->
<----MMDVM_Bridge<------>DMR
Analog_Bridge_Dstar.ini
[AMBE_AUDIO]
server = 127.0.0.1 ; IP address of
xx_Bridge.py
fromDMRPort = 32103 ; AMBE frames from
xx_Bridge (should match "toGatewayPort" in xx_Bridge.cfg)
toDMRPort = 32100 ; AMBE frames from
xx_Bridge (should match "fromGatewayPort" in xx_Bridge.cfg)
ambeMode = DSTAR ; DMR, DMR_IPSC,
DSTAR, NXDN, P25, YSFN, YSFW
minTxTimeMS = 2000 ; Minimum time in MS
for hang delay
gatewayDmrId = 3740029 ; ID to use when
transmitting from Analog_Bridge
repeaterID = 3740029 ; ID of source
repeater
txTg = 1972 ; TG to use for
all frames received from Analog_Bridge -> xx_Bridge
txTs = 1 ; Slot to use for
frames received from Analog_Bridge -> xx_Bridge
colorCode = 1 ; Color Code to
assign DMR frames
DvSwitch.ini Dstar Stanza
[DSTAR]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 32103 ; Port to send AMBE TLV
frames to (export)
RXPort = 32100 ; Port to listen on
(import)
FallbackID = 3740029 ; In case we can not find a
valid DMR id in the database, export this one
ExportTG = 1972 ; Which TG to export
Slot = 2 ; Export slot
Analog_Bridge_DMR.ini
server = 127.0.0.1 ; IP address of
xx_Bridge.py
fromDMRPort = 31103 ; AMBE frames from
xx_Bridge (should match "toGatewayPort" in xx_Bridge.cfg)
toDMRPort = 31101 ; AMBE frames from
xx_Bridge (should match "fromGatewayPort" in xx_Bridge.cfg)
ambeMode = DMR ; DMR, DMR_IPSC,
DSTAR, NXDN, P25, YSFN, YSFW
minTxTimeMS = 2000 ; Minimum time in MS
for hang delay
gatewayDmrId = 0 ; ID to use when
transmitting from Analog_Bridge
repeaterID = 0 ; ID of source
repeater
txTg = 1972 ; TG to use for all
frames received from Analog_Bridge -> xx_Bridge
txTs = 2 ; Slot to use for
frames received from Analog_Bridge -> xx_Bridge
colorCode = 1
DvSwitch.INI DMR Stanza
[DMR]
Address = 127.0.0.1 ; Address to send AMBE TLV
frames to (export)
TXPort = 31103 ; Port to send AMBE TLV
frames to (export)
RXPort = 31101 ; Port to listen on (import)
Slot = 2 ; Export slot
Can someone take a look and let me know if I'm on the right track
or If I am Missing anything?
