Help Needed Allstar Node running DVSwitch with DMR and Echolink Bridge Adding P25


Jeff Wood
 

I have a running Allstar Node using DVSwitch with DMR and Echolink Bridge, i am in the
process of adding a P25 Reflector, I am following the Blog.927.org instructions and help files...
I seem to have it all up and running with no error except for the last step...when i run 

cd /opt/MMDVM_Bridge
./MMDVM_Bridge /etc/MMDVM_Bridge.ini &

it all loads and looks good until the end, this is the error I am receiving.

M: 2019-07-28 13:37:50.289 DMR, Opening DMR Network
I: 2019-07-28 13:37:50.290 P25 Network Parameters
I: 2019-07-28 13:37:50.290     Gateway Address: 127.0.0.1
I: 2019-07-28 13:37:50.290     Gateway Port: 42020
I: 2019-07-28 13:37:50.290     Local Port: 32010
I: 2019-07-28 13:37:50.290     Mode Hang: 3s
M: 2019-07-28 13:37:50.291 P25, Opening INI file: DVSwitch.ini
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Address -> 127.0.0.1
M: 2019-07-28 13:37:50.291 P25, Setting [P25] TXPort -> 34100
M: 2019-07-28 13:37:50.291 P25, Setting [P25] RXPort -> 34103
M: 2019-07-28 13:37:50.291 P25, Setting [P25] Slot -> 2
E: 2019-07-28 13:37:50.291 Cannot bind the UDP address, err: 98
F: 2019-07-28 13:37:50.292 P25, Can not open listener port 34103

any ideas??

Join main@DVSwitch.groups.io to automatically receive all group messages.