Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge


Steve N4IRS
 

I could have sworn we tested this. I will look when I get a chance. My time is very limited because:
1: I am moving after 22 years to a temporary apartment. (Until the new house is ready)
2: I am replacing 2 fiber switches in my SAN
3: I am upgrading enterprise to O365. (upgrade?)



On 10/2/2019 2:58 PM, Steve KC1AWV wrote:
Sorry Steve, I can feel the frustration. I have tested with the Options line, and nothing happens on the XLX side.

root@test:/opt/MMDVM_Bridge_2# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2019-10-02 18:50:28.154 MMDVM_Bridge:
I: 2019-10-02 18:50:28.155 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-10-02 18:50:28.155 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-10-02 18:50:28.155 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2019-10-02 18:50:28.155 This software is for use on amateur radio networks only,
I: 2019-10-02 18:50:28.155 it is to be used for educational purposes only. Its use on
I: 2019-10-02 18:50:28.155 commercial networks is strictly prohibited.
I: 2019-10-02 18:50:28.155 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2019-10-02 18:50:28.155 MMDVM_Bridge-20180423 is starting
M: 2019-10-02 18:50:28.155 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I: 2019-10-02 18:50:28.155 General Parameters
I: 2019-10-02 18:50:28.155     Callsign: KC1AWV
I: 2019-10-02 18:50:28.155     Id: 3122790
I: 2019-10-02 18:50:28.155     Duplex: no
I: 2019-10-02 18:50:28.155     Timeout: 180s
I: 2019-10-02 18:50:28.155     D-Star: disabled
I: 2019-10-02 18:50:28.155     DMR: enabled
I: 2019-10-02 18:50:28.155     YSF: disabled
I: 2019-10-02 18:50:28.155     P25: disabled
I: 2019-10-02 18:50:28.155     NXDN: disabled
I: 2019-10-02 18:50:28.155 Modem Parameters
I: 2019-10-02 18:50:28.155     Port: /dev/null
I: 2019-10-02 18:50:28.156     RX Invert: no
I: 2019-10-02 18:50:28.156     TX Invert: no
I: 2019-10-02 18:50:28.156     PTT Invert: no
I: 2019-10-02 18:50:28.156     TX Delay: 100ms
I: 2019-10-02 18:50:28.156     RX Offset: 0Hz
I: 2019-10-02 18:50:28.156     TX Offset: 0Hz
I: 2019-10-02 18:50:28.156     RX DC Offset: 0
I: 2019-10-02 18:50:28.156     TX DC Offset: 0
I: 2019-10-02 18:50:28.156     RF Level: 100.0%
I: 2019-10-02 18:50:28.156     DMR Delay: 0 (0.0ms)
I: 2019-10-02 18:50:28.156     RX Level: 50.0%
I: 2019-10-02 18:50:28.156     CW Id TX Level: 50.0%
I: 2019-10-02 18:50:28.156     D-Star TX Level: 50.0%
I: 2019-10-02 18:50:28.156     DMR TX Level: 50.0%
I: 2019-10-02 18:50:28.156     YSF TX Level: 50.0%
I: 2019-10-02 18:50:28.156     P25 TX Level: 50.0%
I: 2019-10-02 18:50:28.156     NXDN TX Level: 50.0%
I: 2019-10-02 18:50:28.156     RX Frequency: 0Hz (0Hz)
I: 2019-10-02 18:50:28.156     TX Frequency: 0Hz (0Hz)
M: 2019-10-02 18:50:28.156 Opening the MMDVM
I: 2019-10-02 18:50:28.156 Display Parameters
I: 2019-10-02 18:50:28.156     Type:
I: 2019-10-02 18:50:28.156 DMR Network Parameters
I: 2019-10-02 18:50:28.156     Address: 173.208.200.180
I: 2019-10-02 18:50:28.156     Port: 62030
I: 2019-10-02 18:50:28.156     Local: 62331
I: 2019-10-02 18:50:28.157     Jitter: 360ms
I: 2019-10-02 18:50:28.157     Slot 1: enabled
I: 2019-10-02 18:50:28.157     Slot 2: enabled
I: 2019-10-02 18:50:28.157     Mode Hang: 3s
I: 2019-10-02 18:50:28.157     Options: StartRef=4004
I: 2019-10-02 18:50:28.157 Info Parameters
I: 2019-10-02 18:50:28.157     Callsign: KC1AWV
I: 2019-10-02 18:50:28.157     RX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     TX Frequency: 0Hz
I: 2019-10-02 18:50:28.157     Power: 1W
I: 2019-10-02 18:50:28.157     Latitude: 41.733299deg N
I: 2019-10-02 18:50:28.157     Longitude: -50.399899deg E
I: 2019-10-02 18:50:28.157     Height: 0m
I: 2019-10-02 18:50:28.157     Location: "Test Bridge"
I: 2019-10-02 18:50:28.157     Description: "MMDVM_Bridge"
I: 2019-10-02 18:50:28.157     URL: "https://www.erdn.net"
M: 2019-10-02 18:50:28.157 DMR, Opening DMR Network
I: 2019-10-02 18:50:28.157 RSSI
I: 2019-10-02 18:50:28.157     Mapping File: RSSI.dat
W: 2019-10-02 18:50:28.157 Cannot open the RSSI data file - RSSI.dat
I: 2019-10-02 18:50:28.157 DMR Id Lookups
I: 2019-10-02 18:50:28.157     File: /var/lib/mmdvm/DMRIds.dat
I: 2019-10-02 18:50:28.157     Reload: 24 hours
I: 2019-10-02 18:50:28.259 Loaded 145028 Ids to the DMR callsign lookup table
I: 2019-10-02 18:50:28.259 DMR RF Parameters
I: 2019-10-02 18:50:28.259     Id: 3122790
I: 2019-10-02 18:50:28.259     Color Code: 1
I: 2019-10-02 18:50:28.259     Self Only: no
I: 2019-10-02 18:50:28.259     Embedded LC Only: yes
I: 2019-10-02 18:50:28.259     Dump Talker Alias Data: no
I: 2019-10-02 18:50:28.259     Prefixes: 0
I: 2019-10-02 18:50:28.259     Call Hang: 3s
I: 2019-10-02 18:50:28.259     TX Hang: 3s
I: 2019-10-02 18:50:28.259     Mode Hang: 10s
M: 2019-10-02 18:50:28.259 DMR, Opening INI file: DVSwitch.ini
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] TXPort -> 33100
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] RXPort -> 33103
M: 2019-10-02 18:50:28.260 DMR, Setting [DMR] Slot -> 2
M: 2019-10-02 18:50:28.260 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
M: 2019-10-02 18:50:28.260 MMDVM_Bridge-20180423 is running
I: 2019-10-02 18:50:28.260 Started the DMR Id lookup reload thread
D: 2019-10-02 18:50:38.276 DMR, Sending authorisation
D: 2019-10-02 18:50:38.291 DMR, Sending configuration
D: 2019-10-02 18:50:38.306 DMR, Sending options
M: 2019-10-02 18:50:38.322 DMR, Logged into the master successfully

Once logged in, XLX does not move the client to the requested module.

I think the reason I am confused was that a few months ago, I switched to hblink - which can take a XLX module in the 4000s.

On Wed, Oct 2, 2019 at 2:36 PM Steve N4IRS <szingman@...> wrote:
Has anyone tried Options=StartRef=4004 in the [DMR Network] stanza?

On 10/2/2019 2:25 PM, Adrian Fewster wrote:

Yes that was my point with the test example question below, however XLX is mentioned on the

commit for some reason, being a bridge of course we don't need a choice of networks.

Hopefully some talented coder can do for MMDVM_BRIDGE  as was done for HBlink peers re XLX module option.



On 3/10/19 2:45 am, Waldek SP2ONG wrote:

> Options=StartRef=4004  << will this work with XLX from  MMDVM_BRIDGE dmr network config to link module D ? This would be great if it works, if not could it be enabled ?


The documnet:

https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

it is for DMRPlus not for XLX Network





--
Steve Miller
KC1AWV

Join main@DVSwitch.groups.io to automatically receive all group messages.