Re: Analog Bridge and DStar
toggle quoted messageShow quoted text
Sorry for the delay in getting back to you. You need to do 2 things before compile DummyRepeater & install it. After you do your git pull, you need to make sure you copy the modified version of DummyRepeaterThread.cpp from the Analog_Bridge/DummyRepeater directory into the OpenDV/DummyRepeater/DummyRepeater/ Like so:
kb7sqi@kb7sqi-odroid:~$ cd tmp/source/g4klx/OpenDV/DummyRepeater/
kb7sqi@kb7sqi-odroid:~/tmp/source/g4klx/OpenDV/DummyRepeater$ cp ~/tmp/source/n4irs/Analog_Bridge/DummyRepeater/DummyRepeaterThread.cpp DummyRepeater/DummyRepeaterThread.cpp
You can make a backup of the original file first if you like. You have to have the modified version from Steve, N4IRS's git hub for this all to work. After you done that, then you need to configure DummyRepeater to include the ThumbDV/AmbeServer/Star*DV Support. Here's how you do that:
./configure --with-ambeserver --with-stardv
This will include support for both the ThumbDV/DV3000 & the Star*DV Dongle. If you don't need the Star*DV Dongle, you can leave the --with-stardv off. If you want to use this on a PI, then you need to make sure you include ---with-gpio as well to support the PIDV Board. Once configure has ran, then go ahead & do your make, install it, etc.
Make sure to read the Notes.txt file about this:
The modified version of DummyRepeater will use the USRP channel driver from AllS
tarLink (Just like Analog_Bridge)
DummyRepeater will use the default UDP ports for TX and RX. It uses address 127.
0.0.1 as defined by the USRP channel driver.
If you need to use other ports or addresses, you can define them in the enviorme
nt before you start dummyrepeter.
Now when you start DummyRepeater, do it with the --verbose option:
$ dummyrepeater --verbose
That will give you more info in your Dummy_Repeater Log that'll be in the user home directory from where you start DummyRepeater. When you start up DummyRepeater, it will complain if it can't connect to ircDDBGateway. Check your ircDDBGateway logs also. That should get you going in the right direction. If you have any further questions, let me know.
On Sun, Nov 19, 2017 at 12:54 AM, mjswiatk via Groups.Io <mjswiatk@...> wrote:
Maybe a better question would be what are the proper steps for compiling Dummy Repeater? I'm assuming ithey steps are at the bottom of this message that I copied and to launch with the command "dummyrepeater". Do I need to compile with the AMBE tag? Are there any special tricks with DummyRepeater and Jessie other than downloading the .deb and installing manually for