Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge


Steve N4IRS
 

M: 2019-11-08 14:23:14.874 MMDVM_Bridge-20191105_V1.4.0 is running
D: 2019-11-08 14:23:25.000 DMR, Sending authorisation
D: 2019-11-08 14:23:25.112 DMR, Sending configuration
M: 2019-11-08 14:23:35.333 DMR, Logged into the master successfully
D: 2019-11-08 14:23:35.333 DMR, Sending XLX options
M: 2019-11-08 14:23:35.333 DMR, Remote CMD: txTg=4000
M: 2019-11-08 14:23:35.333 DMR, Tune: id=3112138, tg=4000, mode=Group
M: 2019-11-08 14:23:35.333 DMR, Remote CMD: txTg=4005
M: 2019-11-08 14:23:35.333 DMR, Tune: id=3112138, tg=4005, mode=Group
M: 2019-11-08 14:23:35.461 DMR Slot 2, received network voice header from N4IRS to TG 9
M: 2019-11-08 14:23:35.467 DMR Slot 2, received network end of voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:23:38.840 DMR Slot 2, received network voice header from 2E0MHG to TG 9
M: 2019-11-08 14:23:39.805 DMR Slot 2, received network end of voice transmission, 1.0 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:25:43.917 P25, received network transmission from KE0ABR to TG 10200
M: 2019-11-08 14:25:44.249 P25, network end of transmission, 0.7 seconds, 0% packet loss
M: 2019-11-08 14:26:16.250 P25, Remote CMD: rxport=30000
M: 2019-11-08 14:26:17.335 P25, Remote CMD: message=Setting mode to DMR
M: 2019-11-08 14:26:17.355 P25, Remote CMD: ambeMode=DMR
M: 2019-11-08 14:26:17.381 P25, Remote CMD: txport=31103
M: 2019-11-08 14:26:17.401 DMR, Remote CMD: rxport=31100
M: 2019-11-08 14:26:18.442 DMR, Remote CMD: info
M: 2019-11-08 14:26:20.936 DMR Slot 2, received network voice header from 2W0HFU to TG 9
M: 2019-11-08 14:26:25.503 DMR Slot 2, received network end of voice transmission, 4.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:28:40.586 P25, received network transmission from KE0ABR to TG 10200
M: 2019-11-08 14:28:41.308 P25, network end of transmission, 1.1 seconds, 0% packet loss

Has not dropped yet. (system time is wrong on test machine)

On 11/8/2019 2:02 PM, Ernie Gm7kbk wrote:
You can test my XLX

IP 81.150.10.62
Port 62030
XLX:4005


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, November 8, 2019 4:43:42 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Should not need DMRGateway What is your option and what server and port?

On 11/8/2019 11:22 AM, davidchien0327 via Groups.Io wrote:
Thanks KB3FS and Steve ,I had update to last MB version and can connect my XLX DMR with selected module with Options ,and seems can pass traffic from BM TG to my xlx module D 

But I got same result as Ernie
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects. On both MMDVM-xlx and mmdvm-bm ,network link as below

XLX DMR <-> MB-xlx<->MB-bm<->BM TG 46620

Is the link correct? Or I need to add DMRgateway to each side ?
Thanks
De BV3UN 



Join main@DVSwitch.groups.io to automatically receive all group messages.