Re: Installing DVswitch server on RPI from scratch - Question


Carlos Minguela
 
Edited

Hi, I was in the same situation last week.  I just fount how to make it works.  That tutorial you mention I found that is outdated.  Here is what I did:

cd /tmp
 
wget http://dvswitch.org/install-dvswitch-repo
chmod +x install-dvswitch-repo
./install-dvswitch-repo
apt-get update
 
 
apt-get install dvswitch
 
cd /opt/Analog_Bridge
 
****Download DVSwitch server files
 
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/bin/Analog_Bridge.armhf
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvsm.macro
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvswitch.sh
wget https://github.com/DVSwitch/Analog_Bridge/raw/master/parrot.sh
 
rm Analog_Bridge
cp Analog_Bridge.armhf Analog_Bridge
rm Analog_Bridge.armhf
 
 
chmod +x Analog_Bridge
chmod +x dvsm.macro
chmod +x dvswitch.sh
chmod +x parrot.sh
 
 
****** Modify your personal settings here
** Modify Analog_Bridge.ini
 
decoderFallBack = true 
txPort = 31103
rxPort = 31100
gatewayDmrId = 312xxxxxxx(your DMR ID)
repeaterID = 312xxxxxx(your DMR ID plus 2 digits)
txPort = 50111
rxPort = 50111
aslAudio = AUDIO_USE_GAIN
agcGain = 6
dmrAudio = AUDIO_USE_GAIN
dmrGain = 0.35 
 
** Modify MMDVM_Bridge.ini
 
cd /opt/MMDVM_Bridge
nano MMDVM_Bridge.ini
 
** Change this:
 
[General]
Callsign=EA2XXXXXX(your callsign)
Id=312xxxxxxx(your DMR ID)
Timeout=180
Duplex=0
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
 
[DMR Network]
Enable=1
Address=74.91.118.251(your favorite Brandmeister server)
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0
 
 
**** Activate the system
 
 
systemctl enable md380-emu
systemctl start md380-emu
 
systemctl enable analog_bridge
systemctl start analog_bridge
 
systemctl enable mmdvm_bridge
systemctl start mmdvm_bridge
 
done

I hope this instruction help you.

73
Carlos
KP4CA

Join main@DVSwitch.groups.io to automatically receive all group messages.