Re: ASL to DMR Bridge how to on Raspberry Pi #best_practices

Steve N4IRS

This is how ASL rpt.conf is as "shipped"

; Enable the selected channel driver in modules.conf !!!
rxchannel = dahdi/pseudo            ; No radio (hub)
; rxchannel = SimpleUSB/usb_1999    ; SimpleUSB
; rxchannel = Pi/1                      ; Raspberry Pi PiTA
; rxchannel = Radio/usb_1999        ; USBRadio (DSP)
; rxchannel = Dahdi/1            ; PCI Quad card
; rxchannel = Beagle/1            ; BeagleBoard
; rxchannel = USRP/; GNU Radio interface USRP 

On 11/27/19 7:47 PM, Ted Lawrence via Groups.Io wrote:
Thanks for responding Steve! Very good on the  [1999] Parameters.   All is good with [1999] parameters.  All is working and passing audio to and from DMR.  Just not sure about the my node 505501. It's not connected to any hardware.    

Join to automatically receive all group messages.