Re: Analog Bridge and DStar


Mike, AA9VI
 

Steve,
I read "If you need to use other ports or addresses, you can define them in the environment before you start dummyrepeter."
Where do I make these changes if needed?  
 
USRP_IP="127.0.0.1";export USRP_IP
USRP_TXPORT=34001;export USRP_TXPORT
USRP_RXPORT=32001;export USRP_RXPORT

(I have an Allstar-DMR USRP on ports 34002:32002, and am working on this USRP for Allstar-DStar using 34001:32001).  What I noticed is the configuration of ircddbgateway and dummyrepeater is VERY, VERY, particular.  I had to use the LAN address in ircddbgateway's repeater 2 address and dummyrepeater's local address.  I'm thinking I have to modify that USRP IP to the LAN address now to match it since Allstar isn't seeing anything from it despite the modification in /etc/asterisk/rpt.conf to  contain
rxchannel = USRP/192.168.1.10:34001:32001
192.168.1.10  is necessary (I think) since Dummy repeater won't work with the 127.0.0.1 address
(or am I wrong?)

-- can I have two instances of USRP running on the same box as long as the ports are different?

IRCDDBGATEWAY: 192.168.1.9
REPEATER 1:  127.0.0.1 (located on same box as ircddbgateway)
DUMMYREPEATER (REPEATER 2): 192.168.1.10

192.168.1.10 has the Allstar - DMR gateway
192.168.1.10 working on adding Allsatr-DMR on the same box







Mike

Join main@DVSwitch.groups.io to automatically receive all group messages.