1. main@DVSwitch.groups.io

Re: Brandmeister to XLX

Steve N4IRS
 

You are going to do your cross connect in DVSwitch.ini

Sent by smoke signal (AT&T)

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 5:21:54 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 
Oh yes, I forgot to mention that the MMDVM_Bridge is in its own directory with different rx and tx ports in DVSwitch.ini to avoid conflict with the existing bridge.


On Nov 30, 2019, at 16:49, Steve N4IRS <szingman@...> wrote:


See Ernie's reply AND since you are running 2 copies of MB, change the local post on one of them

Sent by smoke signal (AT&T)

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 4:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge

Join main@DVSwitch.groups.io to automatically receive all group messages.