The network address should point at the xlx reflector

Sent by smoke signal (AT&T)

---

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 5:18:50 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX

 

That was actually the first configuration I tried. Same result either with the Interface IP address, or local loopback. I’ll mess with it some more later. The MMDVM_Bridge part looks easy enough once I can get it talking to XLXD.

On Nov 30, 2019, at 16:39, Ernie Gm7kbk <erniepratt@...> wrote:



Use the ip address  of the machine not 127.0.0.1

Get Outlook for Android

---

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 9:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX

 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:

[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0

Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.

On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:

latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge