Re: Brandmeister to XLX


No that's the port
My address looks like this is the private network ipv4.

Xlx looks at the port of 62030 and the ipv4 address of the device. Or you can put in the external ipv4 address or web address. 

From: <> on behalf of Patrick Perdue <patrick@...>
Sent: Sunday, December 1, 2019 8:41:57 AM
To: <>
Subject: Re: [DVSwitch] Brandmeister to XLX

Currently, I have the address in the DMR Network stanza pointed to the XLX reflector <IP_ADDRESS:62030). I assume this is the network address you're referring to?

If so, then the reflector isn't doing much with that, and this is probably not a DVSwitch issue.

On 11/30/2019 5:22 PM, Steve N4IRS wrote:
The network address should point at the xlx reflector

Sent by smoke signal (AT&T)

From: <> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 5:18:50 PM
To: <>
Subject: Re: [DVSwitch] Brandmeister to XLX
That was actually the first configuration I tried. Same result either with the Interface IP address, or local loopback. I’ll mess with it some more later. The MMDVM_Bridge part looks easy enough once I can get it talking to XLXD.

On Nov 30, 2019, at 16:39, Ernie Gm7kbk <erniepratt@...> wrote:

Use the ip address  of the machine not

From: <> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 9:37:24 PM
To: <>
Subject: Re: [DVSwitch] Brandmeister to XLX

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:

[DMR Network]

Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.

On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here

Join to automatically receive all group messages.