1. main@DVSwitch.groups.io

Re: Brandmeister to XLX

Patrick Perdue
 

Right. I wasn't referring directly to the INI file at the time.

My machine is on a VPS, so the IP of ETH0 is a public IP address.

So, it looks like this.

[DMR Network]
Enable=1
Address=<Public_IP_Of_The_Machine>
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0

I've tried moving the local port as well.


In DVSwitch.ini, I have differentiated the RXPort and TXPort from my existing DMR to Allstar setup.

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31200                  ; Port to send AMBE TLV frames to (export)
RXPort = 31203                  ; Port to listen on (import)
Slot = 2                        ; Export slot


On 12/1/2019 3:56 AM, Ernie Gm7kbk wrote:
No that's the port
My address looks like 192.168.1.66 this is the private network ipv4.

Xlx looks at the port of 62030 and the ipv4 address of the device. Or you can put in the external ipv4 address or web address. 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Sunday, December 1, 2019 8:41:57 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

Currently, I have the address in the DMR Network stanza pointed to the XLX reflector <IP_ADDRESS:62030). I assume this is the network address you're referring to?

If so, then the reflector isn't doing much with that, and this is probably not a DVSwitch issue.



On 11/30/2019 5:22 PM, Steve N4IRS wrote:
The network address should point at the xlx reflector

Sent by smoke signal (AT&T)

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 5:18:50 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 
That was actually the first configuration I tried. Same result either with the Interface IP address, or local loopback. I’ll mess with it some more later. The MMDVM_Bridge part looks easy enough once I can get it talking to XLXD.


On Nov 30, 2019, at 16:39, Ernie Gm7kbk <erniepratt@...> wrote:


Use the ip address  of the machine not 127.0.0.1

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Patrick Perdue <patrick@...>
Sent: Saturday, November 30, 2019 9:37:24 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Brandmeister to XLX
 

I downloaded the latest MMDVM_Bridge earlier today. My current issue is getting MMDVM-Bridge connected to XLXD on the same machine. I'm sure I've directly connected a hotspot to the reflector before, but that was a while ago.

The relevant part of MMDVM_Bridge.ini looks like this:


[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62031
Password=passw0rd
Options=XLX:4002
Slot1=0
Slot2=1
Debug=0


Small part of the MMDVM_Bridge log:

E: 2019-11-30 21:34:28.884 DMR, Connection to the master has timed out, retrying connection

tcpdump shows active connections on UDP 62030, so XLXD should be accepting the connection from MMDVM_Bridge on that port.


On 11/30/2019 4:20 PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge works with no problems. Use the options XLX:4005 this being the module you want to connect to. 4001 for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge

Join main@DVSwitch.groups.io to automatically receive all group messages.