toggle quoted messageShow quoted text
Right. I wasn't referring directly to the INI file at the time.
My machine is on a VPS, so the IP of ETH0 is a public IP address.
So, it looks like this.
I've tried moving the local port as well.
In DVSwitch.ini, I have differentiated the RXPort and TXPort from
my existing DMR to Allstar setup.
Address = 127.0.0.1 ; Address to send AMBE TLV frames
TXPort = 31200 ; Port to send AMBE TLV frames to
RXPort = 31203 ; Port to listen on (import)
Slot = 2 ; Export slot
On 12/1/2019 3:56 AM, Ernie Gm7kbk
No that's the port
My address looks like 192.168.1.66 this is the private network
Xlx looks at the port of 62030 and the ipv4 address of the
device. Or you can put in the external ipv4 address or web
Currently, I have the address in the DMR Network stanza
pointed to the XLX reflector <IP_ADDRESS:62030). I assume
this is the network address you're referring to?
If so, then the reflector isn't doing much with that, and
this is probably not a DVSwitch issue.
On 11/30/2019 5:22 PM, Steve
The network address should point at the xlx reflector
Sent by smoke signal (AT&T)
That was actually the first configuration I tried. Same
result either with the Interface IP address, or local
loopback. I’ll mess with it some more later. The
MMDVM_Bridge part looks easy enough once I can get it
talking to XLXD.
Use the ip address of the machine not 127.0.0.1
I downloaded the latest MMDVM_Bridge earlier today.
My current issue is getting MMDVM-Bridge connected
to XLXD on the same machine. I'm sure I've directly
connected a hotspot to the reflector before, but
that was a while ago.
The relevant part of MMDVM_Bridge.ini looks like
Small part of the MMDVM_Bridge log:
E: 2019-11-30 21:34:28.884 DMR, Connection to the
master has timed out, retrying connection
tcpdump shows active connections on UDP 62030, so
XLXD should be accepting the connection from
MMDVM_Bridge on that port.
On 11/30/2019 4:20
PM, Ernie Gm7kbk wrote:
latest version of MMDVM_bridge
works with no problems. Use the options XLX:4005
this being the module you want to connect to. 4001
for A 4002 for B etc. latest version is here https://github.com/DVSwitch/MMDVM_Bridge