Re: Help after editing rpt.conf. Not sure why?


Ted Lawrence
 

[1999]

rxchannel = USRP/127.0.0.1:34001:32001  ; Use the USRP channel driver. Must be enabled in modules.conf

                                        ; 127.0.0.1 = IP of the target application

                                        ; 34001 = UDP port the target application is listening on

                                        ; 32001 = UDP port ASL is listening on

 

duplex = 0                              ; 0 = Half duplex with no telemetry tones or hang time. Ah, but Allison STILL talks!

 

hangtime = 0                            ; squelch tail hang time 0

althangtime = 0                         ; longer squelch tail hang time 0

 

holdofftelem = 1                        ; Hold off all telemetry when signal is present on receiver or from connected nodes

                                        ; except when an ID needs to be done and there is a signal coming from a connected node.

 

telemdefault = 0                        ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me.

 

telemdynamic = 0                        ; 0 = disallow users to change the local telemetry setting with a COP command,

 

linktolink = no                         ; disables forcing physical half-duplex operation of main repeater while

                                        ; still keeping half-duplex semantics (optional)

 

nounkeyct = 1                           ; Set to a 1 to eliminate courtesy tones and associated delays.

 

totime = 180000                         ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)

 

idrecording = |ie                       ; id recording or morse string see http://ohnosec.org/drupal/node/87

idtalkover = |ie                        ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129

 

Join main@DVSwitch.groups.io to automatically receive all group messages.