Re: Help after editing rpt.conf. Not sure why?


Steve N4IRS
 

You have BOTH nodes using chan_usrp. I have to assume you mean to use 1999 to connect to AB.
What is the purpose of 1999?
What is the purpose of 505501?

What should be connected to 1999?
What should be connected to 505501?

On 12/31/19 8:24 AM, Ted Lawrence via Groups.Io wrote:

[1999]

rxchannel = USRP/127.0.0.1:34001:32001  ; Use the USRP channel driver. Must be enabled in modules.conf

                                        ; 127.0.0.1 = IP of the target application

                                        ; 34001 = UDP port the target application is listening on

                                        ; 32001 = UDP port ASL is listening on

 

duplex = 0                              ; 0 = Half duplex with no telemetry tones or hang time. Ah, but Allison STILL talks!

 

hangtime = 0                            ; squelch tail hang time 0

althangtime = 0                         ; longer squelch tail hang time 0

 

holdofftelem = 1                        ; Hold off all telemetry when signal is present on receiver or from connected nodes

                                        ; except when an ID needs to be done and there is a signal coming from a connected node.

 

telemdefault = 0                        ; 0 = telemetry output off. Don't send Allison to DMR !!!!!!!!!!!!!!!!! Trust me.

 

telemdynamic = 0                        ; 0 = disallow users to change the local telemetry setting with a COP command,

 

linktolink = no                         ; disables forcing physical half-duplex operation of main repeater while

                                        ; still keeping half-duplex semantics (optional)

 

nounkeyct = 1                           ; Set to a 1 to eliminate courtesy tones and associated delays.

 

totime = 180000                         ; transmit time-out time (in ms) (optional, default 3 minutes 180000 ms)

 

idrecording = |ie                       ; id recording or morse string see http://ohnosec.org/drupal/node/87

idtalkover = |ie                        ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129

 


Join main@DVSwitch.groups.io to automatically receive all group messages.