Re: MMDVM_Bridge not sending to NXDNGateway


Steve N4IRS
 

As I said,
Cross connect TX to RX and RX to TX

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31015                  ; Port to send AMBE TLV frames to (export)
RXPort = 31014                  ; Port to listen on (import)


[NXDN]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31014                  ; Port to send AMBE TLV frames to (export)
RXPort = 31015                  ; Port to listen on (import)

On 1/28/20 9:11 PM, Bill N2WNS wrote:
This is a DMR<->NXDN. I wasn't sure if the MD380 server was needed, so I put it in there anyway. I read it wasn't needed for DMR/NXDN/YSF but I intend on added P25 to the Mix at some point and believed it would be needed then. I mapped out all my ports on paper before putting this in place.

Here is my DVSwtich config :

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31015                  ; Port to send AMBE TLV frames to (export)
RXPort = 31014                  ; Port to listen on (import)
Slot = 2                        ; Export slot


[NXDN]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 31017                  ; Port to send AMBE TLV frames to (export)
RXPort = 31016                  ; Port to listen on (import)
FallbackID = 34000            ; In case we can not find a valid DMR id in the da                                                                                               tabase, export this one
NXDNFallbackID  = 34000         ; Use this ID when the input DMR ID is not found                                                                                                in the database
Translate = 31360=31360           ; Translate NXDN TG < -- > DMR TG (bidirection                                                                                               al)
Slot = 2                        ; Export slot

Join main@DVSwitch.groups.io to automatically receive all group messages.