Re: EA5GVK with Zumspot AMBE Server...


Adam Liette
 

Ok. I didn't know about that part of analog_bridge.ini. What I'm aiming for is to use the AMBE board rather than md380emu and be able to use the DV-Switch mobile app. It was my understanding that using an AMBE device would allow it to work better on D-Star, etc.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of ve6gcd@... <ve6gcd@...>
Sent: Saturday, February 1, 2020 10:27:54 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] EA5GVK with Zumspot AMBE Server...
 
Can you tell me what do you want to do with it on the Pi?

I used the Zum Ambeboard as vocoder hardware for Analog_Bridge. So upon inserting the configured SD card (Ambe Server mode with IP address 192.168.1.230 and port 2460) to the Zum Ambeboard, I plugged the Ethernet data cable to the unit then powered it on. Afterwards, I configured the Analog_Bridge.ini with the following lines:

[DV3000]
address = 192.168.1.230                ; IP address of AMBEServer
rxPort = 2460                                  ; Port of AMBEServer
; address = /dev/ttyUSB0                ; Device of DV3000U on this machine
; baud = 460800                              ; Baud rate of the dongle (230400 or 460800) 
serial = false                                    ; Use serial=true for direct connect or serial=false for AMBEServer  

Join main@DVSwitch.groups.io to automatically receive all group messages.