And finally the answer comes out. Hamvoip uses arch linux as its base and none of the dvswitch software will work on arch. It has been built for the Debian based systems like raspbian, dwbian and ubuntu. You will not get this to work without rebuilding everything from source code. 

The only other option is to start from a clean raspbian install and install allstar and the dvswitch components that way, not using the hamvoip image. 

That is how myself and many many others use allstar and dvswitch bridges. Hamvoip is ok to get started with but customization is very difficult. It’s not hard to install allstar and everything on raspbian. Again just follow the directions. 

On Apr 5, 2020, at 16:38, Peter M0NWI <peter-martin@...> wrote:

 Why can't you just start with a standard Debian / Raspbian, dump the Arch custom build and add the extras too it instead then?

73,

Peter

---

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of af5xp via groups.io <af5xp@...>
Sent: 05 April 2020 21:31
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Installing & setup of MMDVM_Bridge Analog_bridge to do allstarlink, d-star, dmr, p25 linking. #analog_bridge #mmdvm_bridge #hblink

 

Steve, 

           It's hard to work with os on a pi with ARM that Hamvoip all-star uses that nothing installs like regular vers of Linux do. All most everything has to be manually installed, piece by piece. That's why I have/use a separate Linux machine for the other stuff.