Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge
I simply want to link my YSF Reflector to a Talkgroup on Brandmeister.
Meanwhile I have tried 4 full installation attempts to do a Bridge between YSF and DMR but no luck.
I have 2 RPI 3B+, both running raspbian stretch lite. One has a YSF Reflector installed according to QSO365´s (very good and working ) explanation. This Reflector and its Dashboard installed on the first attempt and runs fine without problems
The other RPI 3B+ also has raspbian stretch lite installed, PHP7.0 and on top of it DVSwitch-System-Builder.
Both RPi´s are running in the same Network 192.168.10.xxx behind a firewall.
I was able to get the MMDVM_Bridge Dashboard running but it does not show any links or connection attempts from HT´s and the status is always idle.
How do I get the MMDVM Bridge to link my reflector to the Brandmeister TG i have entered in DVSwitch.ini?
Is there a complete detailed description which values in MMDVM_Bridge.ini and DVSwitch.ini and possibly in any other hidden config files or somewhere else need to be changed/adapted and how?
I have done the suggested changes of values in the config files like from this https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow
but there are a lot of unanswered questions e.g. what do I put in "DMR adress" (I assume its the Brandmeister Master??) or in YSF Gateway Address (is it the URL of the other Pi that runs the Reflector?)
What other ports do I need to open up on the firewall ?
How should the config files look like for my setup?
I have tried everything I could think of but no luck, the Bridge does not work as it should
Do I need anything else (Software or Hardware than the two Raspberrys to do this? Did I miss anything?
I´m completely stuck at this point.
any help would greatly be appreciated