Re: Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge


Steve N4IRS
 

To connect to FCS, you will need to use YSFGateway. (today)

Steve N4IRS

On 5/16/20 4:42 PM, Rudy N6DOZ wrote:

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.
 

Join main@DVSwitch.groups.io to automatically receive all group messages.