Re: Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge


Rudy N6DOZ
 
Edited

 
 
 
Steve, thanks a ton :) Got it working!
 
BM <-> MB <-> YSFGateway <-> FCS Reflector
 
Here's are ini snips so folks can refer to it (with just the important parts).
 
 
MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                  
Slot = 2                      
                  
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=1
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42002     

# Port=42002 - Make sure this doesn't run into a YSFReflector or XLXReflector running on the same machine
 

Join main@DVSwitch.groups.io to automatically receive all group messages.