Re: new install working but cannot get BM to TGIF to work

John K1IF
 

I changed permissions to 777 on each .sh and now getting...
AB LOG
I: 2020-05-18 20:23:26.901 Tune macro: *14 will invoke "/opt/Analog_Bridge/TGIF_chng.sh"
I: 2020-05-18 20:23:27.263 rxport=: 30000
M: 2020-05-18 20:23:27.264 TLV rx socket reopened for 127.0.0.1:30000
I: 2020-05-18 20:23:28.549 MESSAGE packet sent to USRP client: Setting mode to DMR
I: 2020-05-18 20:23:28.621 ambeMode = DMR, size = 72
M: 2020-05-18 20:23:28.621 Connecting to DV3000 hardware......
M: 2020-05-18 20:23:28.633 Begin DV3000 decode
M: 2020-05-18 20:23:28.633 DV3000 latency is currently set to 1
I: 2020-05-18 20:23:28.688 txport=: 31103
I: 2020-05-18 20:23:28.759 rxport=: 31100
E: 2020-05-18 20:23:28.759 Can not bind port 31100, error code = 98 (Address already in use)
M: 2020-05-18 20:23:28.759 TLV rx socket reopened for 127.0.0.1:31100
I: 2020-05-18 20:23:31.383 Macro result was 0
I: 2020-05-18 20:24:15.123 txTg=: 4000
M: 2020-05-18 20:24:53.782 TLV tx socket re-opened for 127.0.0.1:415496
M: 2020-05-18 20:24:53.782 PTT on
M: 2020-05-18 20:24:56.197 Short transmission, extend hang time by 85 ms
M: 2020-05-18 20:24:56.317 PTT off (keyed for 2535 ms)
from command line:
cp:  missing destination file operand after /opt/MMDVM_Bridge/MMDVM_Bridge_TGIF.ini/optMMDVM_Bridge/MMDVM_Bridge.ini

Join main@DVSwitch.groups.io to automatically receive all group messages.