Re: enabling an AMBE dongle


Steve N4IRS
 

Derek,
I don't know what menu you are using. I have to assume you are using the DVlink image. I can't help you with that.
For AB, below are the settings for Analog_Bridge.ini Even though you are running a 2.5 amp PS, I suggest you run AMBEtest4.py to verify correct operation of the DV3000.


[DV3000]
; address = 127.0.0.1                   ; IP address of AMBEServer
; rxPort = 2460                         ; Port of AMBEServer
address = /dev/ttyUSB0                  ; Device of DV3000U on this machine
baud = 460800                           ; Baud rate of the dongle (230400 or 460800)
serial = true                           ; Use serial=true for direct connect or serial=false for AMBEServer


Steve N4IRS

On 7/5/20 8:15 AM, Derek William Haden wrote:
I have the ea5gvk img on a Rpi and it's working fine.
The DStar audio is crap, so I bought a NWD usb dongle. lsusb shows the device, and ttyUSB0 is in /dev Latency timer comes back as 1. I have gone into the menu settings and selected the AMBE usb option under emulation. However the audio is still crap, and it does not seem to have improved on DMR. I think there are some settings in Analog_Bridge.ini that may have some bearing on this, but I just can't figure it out. Can anyone help? Power supply is a 2.5 amp device so plenty of juice.

Join main@DVSwitch.groups.io to automatically receive all group messages.